Status
Not open for further replies.

jpcwon

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Jan 14, 2014
1,943
5,519
North Easton, MA
Nice JP. I'm really enjoying the Sat22 on a regulated device. 1 ohm at 13 watts seems to be where I like Lime Sparkle.

For DNA40 owners, I'd be interested to hear about temperature control on a genesis atty or mesh dripper setup.

Nice man.....yeah i have Lime Sparkle in my Mini Jenni right now....good stuff!!

With the Sat22, I'm running a .7 Ohm coil at 23 watts (about 4.2 volts)....excellent vapor and flavor!!
 

Juggernaut666

Super Member
ECF Veteran
Verified Member
Sep 13, 2014
745
1,216
Dallas Tx.
e4581b5f3c4c5bc92c49241b6f4f46ff.jpg


1269b4299b355c4d26ebaf4ff077c6f2.jpg



Found an AWESOME, shop down here in DFW, Vaporescence in Richardson. Sold me their last P3 for $225. My wife rocks, gave me the go ahead to buy it. Haven't had much time with it only a couple hours using the Silo on top for the time being, but vapes, well like a Provari. Awesome.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
I was bummed when I saw the posts of FB for the SAOS. Darn. I'd like a tube mod of a small size. Little hands make most box mods uncomfortable to hold for any period of time.

I'm trying to decide what to get that would qualify posting here :)

I'm concerned about the scratches to the WEAII and expect a WEAIII will follow after the GEM is released anyway. I'm not hard on my mods, or worry about a ding or two, but the WEA seems prone to scratches and I don't want to wrap it. The Zen, while not precisely a tube, looks to be small enough that I could handle it, but it doesn't seem to get much love either. I don't know if that's personality or product. Ack.. My Provari's are fine, I'm looking to add something nice to the rotation. Last month was my 1yr vaperversary and Christmas is coming so I think something special is called for. :laugh:

Hey, I've the WAE-II since Jan-2014 ~ It's in my daily rotation. Not a single noteworthy scratch, ding, dent, blemish, scar or whatever ;) As with any quality possession a bit of care sees it thru pretty well.
 

WhiteHighlights

Ultra Member
ECF Veteran
Verified Member
Sep 26, 2013
1,659
10,348
MetroWest Boston, MA, USA
Hey, I've the WAE-II since Jan-2014 ~ It's in my daily rotation. Not a single noteworthy scratch, ding, dent, blemish, scar or whatever ;) As with any quality possession a bit of care sees it thru pretty well.

Ok Q, twist the screw ;) - what's the best nano size topper (single coil, extra points if it has glass) to put on it until the GEM comes out? I have a Kayfun (authentic) on my Provari in 490 mode that's about as big/tall as I want to get. I had to get the tatroe base to avoid accidental falls at home. If it wasn't me wobbling it when I put it down, it was the cat investigating the vapor! I take care of my mods too but life happens.
 

Cloudrider

Senior Member
ECF Veteran
Verified Member
Jan 26, 2014
135
170
elk grove, ca
Hey, I've the WAE-II since Jan-2014 ~ It's in my daily rotation. Not a single noteworthy scratch, ding, dent, blemish, scar or whatever ;) As with any quality possession a bit of care sees it thru pretty well.

Agree 100%, I bought jwraps for mine and never used them, no need.
 

sedge

Vaping Master
ECF Veteran
Verified Member
Jan 8, 2012
6,839
21,234
Palm Springs, CA
Ok Q, twist the screw ;) - what's the best nano size topper (single coil, extra points if it has glass) to put on it until the GEM comes out? I have a Kayfun (authentic) on my Provari in 490 mode that's about as big/tall as I want to get. I had to get the tatroe base to avoid accidental falls at home. If it wasn't me wobbling it when I put it down, it was the cat investigating the vapor! I take care of my mods too but life happens.
I know what Q is going to say... He is going to say the Erlkonigin nano but if you want glass I believe IBTANKED is the only option currently available but you will have a 22 millimeter nano tank.
 

jaxgator

Vaping Master
ECF Veteran
Verified Member
May 24, 2014
3,016
5,447
Jacksonville, FL
e4581b5f3c4c5bc92c49241b6f4f46ff.jpg


Found an AWESOME, shop down here in DFW, Vaporescence in Richardson. Sold me their last P3 for $225. My wife rocks, gave me the go ahead to buy it. Haven't had much time with it only a couple hours using the Silo on top for the time being, but vapes, well like a Provari. Awesome.

Congrats Juggs! I take it you are satisfied? :D

Since this thread is about authentic mods does anyone know if Mist Hub sells only authentics?

Thanks

and here's an authentic beater that works as good as new

14320386233_abbdb28045_o.jpg

Wow! I remember when you first posted about acquiring that mod from the classies in the Picture of your Setup - Part 2 in the New Members section. Something like 4-5 months ago now. Looks like the old gal is holding up well. Provari - Tried and True.
 

Juggernaut666

Super Member
ECF Veteran
Verified Member
Sep 13, 2014
745
1,216
Dallas Tx.
Congrats Juggs! I take it you are satisfied? :D



Wow! I remember when you first posted about acquiring that mod from the classies in the Picture of your Setup - Part 2 in the New Members section. Something like 4-5 months ago now. Looks like the old gal is holding up well. Provari - Tried and True.
Yeah, very much so. Just need an erl to top it off. [emoji6]
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Ok Q, twist the screw ;) - what's the best nano size topper (single coil, extra points if it has glass) to put on it until the GEM comes out? I have a Kayfun (authentic) on my Provari in 490 mode that's about as big/tall as I want to get. I had to get the tatroe base to avoid accidental falls at home. If it wasn't me wobbling it when I put it down, it was the cat investigating the vapor! I take care of my mods too but life happens.
I know what Q is going to say... He is going to say the Erlkonigin nano but if you want glass I believe IBTANKED is the only option currently available but you will have a 22 millimeter nano tank.

Hehe, the reason why I'm keeping mum :)

Btw, I have all those Erlk-IBTs but don't use them. The copoly is fine with me! Then I don't vape any tank crackers I guess (tho a citrus and a menthol one are going well with it). Here's the options in that dimension:

Updated List of 21mm Attys:
To go with our WE / WAE-II

A. GENESIS
1. Wand Ti, by Mark Bugs
2. Storm Rider 2.1, by Steamboy
3. Reactor Ti, by Doc Dave
4. Bliss, by Doc Dave
5. Steam Turbine, by Doc Dave
B. RTAs
6. Aqua, by UVO Systems
7. Prometey v1, by Titanium Mods from Ukraine
8. Erlkönigin, by i2r Designs
9. Tilemahos, by GG
C. DRIPPERS (RDA)
10. Trident v2, by Grand Vapor
11. Nimbus, by JPGE
D. CARTOTANK (for using Tank-RBAs like Sophia and Diver v2)
12. X8 Tank, by Kamry
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Wow! I remember when you first posted about acquiring that mod from the classies in the Picture of your Setup - Part 2 in the New Members section. Something like 4-5 months ago now. Looks like the old gal is holding up well. Provari - Tried and True.

It cost me $75 after selling the IBs & Lil Mamas that came with it. Works perfect. It's my hiking rig.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Thanks everyone!
facepalm:
I looked at the Erlkönigin awhile ago, (who wouldn't?), but kept seeing pictures of the full size and forgot about the nano. There goes my credit card up in smoke!

That Nano is tinier than many Nanos ~ but holds juice more than any Nano :)
 

WhiteHighlights

Ultra Member
ECF Veteran
Verified Member
Sep 26, 2013
1,659
10,348
MetroWest Boston, MA, USA
Ordered the Erl nano but forgot drip tip :facepalm: Oh well, I'll get that when I order my 2nd one :laugh:
This looks like the baby I've been searching for for a long time and as a nice coincidence, my last name means king in german.

Off to read the pictorial thread - already found the handy link to the nano setup, thanks Q!

also ordered WEAII let the waiting begin
 
Status
Not open for further replies.

Users who are viewing this thread