High End REGULATED MODS !

[qorax]

^You take nice closeups with your Note and the Microlens kit Sedge. Kudos to you√

 

[RickCain]

Love the combo - that is once I got some 1ohm 306's. GVC never tasted so good.

Vapor Flask V2.1 / Vela Latina

Sent from my HTC One_M8 using Tapatalk

 

[qorax]

^Super nice Rick

 

[sedge]

I did a dual coil build on the new Aqua v2 with Ni200 on the Vapor Fladk and posted here if anyone is interested

http://www.e-cigarette-forum.com/forum/showthread.php?p=14452474

 

[vaptamist]

Protovapor XPV dna 40 with a Vaperfexion Fission rda.

 

[qorax]

^Your pics are always soooooo top quality Vaptamist!

 

[Marc411]

Protovapor XPV dna 40 with a Vaperfexion Fission RDA.

I've been looking at the Vaperfexion Fission, is the AFC set up for dual coil only? You can't really tell from the pictures on the site.

 

[qorax]

 

[vaptamist]

I've been looking at the Vaperfexion Fission, is the AFC set up for dual coil only? You can't really tell from the pictures on the site.

Yes, although I'm using a single coil on it now, and I'm not having any issues.

 

[Marc411]

Yes, although I'm using a single coil on it now, and I'm not having any issues.

Thank you, I appreciate the response. It looks like a very well made topper at an incredible price.

 

[jaxgator]

Protovapor XPV DNA 40 with a Vaperfexion Fission RDA.

Very nice!

Do you have any images of the inside of the top cap?

I don't know why manufacturers and sellers hardly ever post an image of the inside of RDA top caps.

 

[vaptamist]

Of the deck? Or actually the inside of the top cap?

 

[sedge]

Of the deck? Or actually the inside of the top cap?

Actually both would be nice to see.

 

[jaxgator]

Of the deck? Or actually the inside of the top cap?

I wanted to see the inside of the top cap but yeah, like sedge said, both would be nice to see.

 

[qorax]

Talking about the innards, how's this one?

The Apollo RDA, by Leo

 

[FearTX]

Talking about the innards, how's this one?

The Apollo RDA, by Leo

I might actually be excited about that......

I have been on a kick with the Hellfire Top Air atties lately I will have to buy this new Capitall top air with AFC then maybe that Apollo

 

[Bern Diesel]

So what's everyone building their atty's at? I'm not used to building this high yet but found that above or around 1 ohm. Currently running dual coil Origen dripper at 1.2 ohms and Kayfun at 1.4 ohms, both with 28 gauge A-1 kanthal. Run it at 27 watts and with the Origen and 12 watts with the Kayfun

 

[StrikeIII]

So what's everyone building their atty's at? I'm not used to building this high yet but found that above or around 1 ohm. Currently running dual coil Origen dripper at 1.2 ohms and Kayfun at 1.4 ohms, both with 28 gauge A-1 kanthal. Run it at 27 watts and with the Origen and 12 watts with the Kayfun

Yeah I build between .9 to 1.2 and go between 23 to 25 watts.

I'm currently at .9 with 26g at 25 watts.

Sent from my Samsung Note 4.

 

[qorax]

So what's everyone building their atty's at? I'm not used to building this high yet but found that above or around 1 ohm. Currently running dual coil Origen dripper at 1.2 ohms and Kayfun at 1.4 ohms, both with 28 gauge A-1 kanthal. Run it at 27 watts and with the Origen and 12 watts with the Kayfun

With regulated mods you don't need to go sub-Ohm. B'coz you can always crank up the wattage (or volts) to get the heat you desire. Our regular LR coils (1Ω & above) will work fine. I typically run my attys between 1.2-1.5Ω.

 

[sedge]

Vapemail.