High Voltage Tank and Coil In Stock Alert !!

[DomDoobie]

I love this tank so much I'd like to see fellow vapors get it. As of 9:30 eastern time 4/2/2015 the High Voltage tank and replacement coils are IN STOCK ! At an amazing $33.99 for the tank and 5 .2ohm replacement coils for $15.99 ! That's a good price. here's the link to vape royalty High Voltage Sub Ohm Tank Atomizer. Don't know how long they will last but get it while you can it's a great tank ! A few hints: after assembling the top of the tank can be twisted in either direction to open or close the juicing holes. When taking out or replacing the coil always make sure the silicone gasket stays in the assembly and dont stick to the coil and you throw it out by accident. Sweet spot seems to be between 40 and 50 watts. Always check once in a while that the chimmeny doesn't loosen because it can. Those of you who get it Enjoy ! let me know what you think. There's nothing but positive reviews out there for this tank.

 

[DomDoobie]

Just Vape has them in stock now also. $39.99 here's the link High Voltage 0.2

 

[DomDoobie]

Just Vape sold out vape royalty still has them

 

[DomDoobie]

Still in stock at vape royalty. Anyone else buy it yet ? I dont see anything negative posted about this tank like all these Kangar tanks that leak etc etc. Mine is like a month and a half old, run tons of juice throught it and I cant find anything wrong with it !

 

[crocosurfer]

Yeah dom its a good tank but i have to say the starre is a little better
What i don't like about the high is the bottom pin that unscrew by itself too easy and i almost lost it..sometimes i got bad readings and i have to screw it too often(with my thumb lol)
Some coils were really bad too, popping and sending juice in my mouth even at 40,50w
Still a good tank that look awesome but i've seen better

 

[DomDoobie]

Hey Crocosurfer. Here's what I've found. Give the coil a chance to break in. I found that for the firstI don't know tank or so it sucks in the juice like crazy. Lot of coton in those coils. Then it mellows out. As far as the pin, I didn't have any trouble. Maybe tighten it up with a scredriver. After the coil breaks in I think you will have a different opinion. I run mine at 40 watts with 75/25 vg/pg. Also dont forget if your running thin juice take the knurled part of the top of the tank and rotate it either way a little to open or close the juicing slits. Something the other tanks can't do ! Let me know in a day or two what you think. I get great flavor and clouds out of it also.

 

[DomDoobie]

Back in stock at just vape $39.99 High Voltage 0.2 Here is a code for 15% off and free shipping SHOPNOW15

 

[Mellowbuzz]

How much do they pay you to plug their product? lol

 

[DomDoobie]

Same thing they did last year,,,,, nothing ! lol I don't work for them or any Vape Shop either. I post for breazy.com because they give good deals and excellent customer service. I post about this tank because I think it's great ! I even have a second one coming should be here tommorow. None of the Vape Shops that I have told about it out here on the East Coast can seem to get it either. Just trying to keep people informed so that maybe they will be able to get a tank that don't leak, get hot at the tip or have any other problems. Anyway to each his own. Do whatever works for you and that makes you happy. That's all that really matters. Me I just try to do whats right and keep a good reputation on the forum. So as always,,,, I wish everyone a nice day !

 

[Mellowbuzz]

Your post reads like a pop-up spam ad. Then reading through your activity, I see that many of your posts read the same way, in that they frequently direct people to a site of some kind to order one product or another. So, just thought I would ask.

In any case, uhmm...thanks for the heads-up!

 

[DomDoobie]

No problem at all. I've been finding that trying to be to helpful on the forum looks suspiscious. I was going to let this one fall through the cracks. Doesn't seem like to many people are interested either. Everyone seems bent or the Artic or Starre. I do try to direct people to places I've dealt with that have given me good deals or good customer service. Part of it is that I'm happy to refer people to good items or stand up places. I usually get good deals so I like to see other people get them also. Better than referring someone to a bad site or deal. Maybe I should tone it down on the helpfullness. You know the old saying...nice guys finish last ! Not saying your accusing me of anything either but you do have a valid point in that it appears I have something to gain when in actuality I just hope to gain a few good fellow member friends. Some people have taken some of my advice and were happy with dealing with a vendor or getting an item.

 

[MikeB2Shady]

Hey, Dom. Looks like the High Voltage is getting the upgrade treatment. I've seen a couple of videos on YouTube as well. Looks like a really nice upgrade IMO
Matrix Sub Ohm Tank Atomizer by High Voltage

 

[DomDoobie]

Hey Mike ! Saw that somewhere else also. I thought at first it was a clone because the center pin isn't copper like the origingal. Looks pretty much the same except for the re-design of the airflow slits. I hope the .5 coils fit our tanks (I would think they should) Then I can use it on the God Mod also. Either one is a winner to me !

 

[DomDoobie]

After looking at mine closer, the chimmeny looks different. Wonder is the new one will be able to move the top of the tank to open and close the juicing holes ?

 

[DomDoobie]

Looks like this tank is becoming more available and the prices are coming down. Vape street has it back in stock now for the lowest price I've seen it at $30.00. They also have the Matrix tank in stock now for the same price. Just trying to be helpful and informative. Here's a link for anyone interested http://store.vape-street.com/product/high-voltage-subtank-0-2-ohms/

 

[Cobra29svt]

After looking at mine closer, the chimmeny looks different. Wonder is the new one will be able to move the top of the tank to open and close the juicing holes ?

Youre not talking about the air adjustment on the drip top are you?

 

[DomDoobie]

No. You can grab the flat part of the top of the tank and move it left or right to open or close the wicking holes using the chimney. The chimney is attached to the top of the tank and one of the things this tank can do is open or close the wicking holes for different juices.