I don't like menthol either. When I first tried it, I intermediately noticed the menthol. But it quickly developed into a much, much more complicated flavor. It's impossible to describe, but I love it!
Hog's Mods
- Thread starter Hogwart
- Start date
- th_trl_thread_readers 0
- Status
New page, new info, new list 
If you need to make corrections please DO NOT quote or copy this list. PLEASE simply mention you have a list correction and give the mod number followed by the current/relevant information.
-----------------------------------------------------------
Unnumbered, unsigned prototypes:
Bottom Feeder Prototype - firhill
VV Non-Feeder Prototype - Poplar - Rockproof
Special editions:
PIF Hog - Poplar - ClayK
Production models:
1 - Poplar - Drottwiler {SS/Silkie Smooth}
2 - Poplar - *RETIRED* (from BiancaMontgomery {Bluff})
3 - Poplar - lthaver (from makeshiftJake, from FlyingV)
4 - Poplar - hairball (from landlord, from trouble2k)
5 - Poplar - Darkwitless (gifted by BiancaMontgomery)
6 - Birch/Bocote - trouble2k (from mfraz25, from BiancaMontgomery)
7 - Birch/Bocote - Queen (from SKYYcamel)
8 - Birch/Bocote - old hippy {Ayla} (from trouble2k)
9 - Birch/Bocote - Doots
10 - Birch/Bocote - BiancaMontgomery {My Precious}
11 - Birch/Bocote - ottie333 (from cleolove)
12 - Poplar - grandmato5
13 - Poplar - pwyll
14 - Poplar - TBM
15 - Poplar - Grammie {TaDa}
16VV - Poplar - VVFeeder Prototype - Rockproof
17 - Poplar - 2mtech {Hamton}
18 - Poplar - db13berry
19 - Maple/Bocote - ??? (from Fuginazole, from trouble2k)
20 - QSR Oak/B Palm - rtrain99 (from trouble2k, from BiancaMontgomery)
21 - QSR Oak/B Palm - Adam024 (from Landlord, from 2mtech, from Ma'am)
22 - Maple/Cocobolo - TxParamedic {Lil' Bit}
23 - QSR Oak/B Palm - Cherewine {Chanel} (from Lynleestar)
24 - Maple/Purpleheart - cleolove {Violet} (from pchela ~ cleo finally stole her away!)
25 - QSR Oak/H Negro - banjar {Bart}
26 - QSR Oak/H Negro - ZinniaBlaze
27 - QSR Oak/H Negro - trouble2k (from ime5000, from Cherewine)
28 - Maple/Bocote - nester12 (from GAC)
29 - Maple/Bocote - K*Rose
30 - Maple/Bocote - hairball
31vv - QSR Oak/B Palm - VVFeeder Prototype 2 (ORK-T Chip set) - Rockproof
32 - Blue and Ivory Staburl - MasonD {Purdy Piggy}
33 - Purpleheart/Canary - cleolove {Velvet}
34 - Canary/Purpleheart - vanZilla (from pchela)
35 - Canary/Purpleheart - pringles13
36vv - Cedar/Walnut - 2mtech {Wilbur}
37vv - Marblewood/H Negro - Mvgratz (from RIMP)
38VV - Cedar - coffm0 {Streaker}
39 - Canary/Purpleheart - Cherewine {Chloe}
40VV - Canary/H Negro - BiancaMontgomery {Veruca}
41 - Zebra/Black walnut - SinCityAngel (from MiXoLoGiSt)
42 - Jatoba/Treated Walnut - beezer (from Pickles05)
43 - Goncalo Alves/H Negro - dordas23
44 - Black Walnut/Yellowheart - trouble2k {Java}
45 - Black Walnut/Zebra - flying low
46 - Wenge/H Negro - db13berry
47 - Black Walnut/Bocote - HellaDank (from Slot-Tech, from SKYYcamel)
48 - Goncalo Alves/Yellowheart - flying low
49 - Purpleheart/Yellowheart - hot2trot
50 - Paduak/G Ebony - lrd3
51 - Maple/Yellowheart -
52 - Vera/B Rosewood - DavidTop
53 - Claro Walnut/Satine - Taniger1 {Misha}
54 - Wenge/Purpleheart -
55 - Bocote/B Ebony - cherewine {El Tigre}
56 - Ironwood/Sycamore - erich
57 - QSR Oak/Bocote -
58 - Bubinga/Curly Maple - Slot-Tech
59 - Hickory/B Rosewood - Dustykicks {Kona}
60 - B Walnut/Cocobolo - Washvap
61 - Jotoba/Cocobolo- kazz63758
62 - Jotoba/Lacewood - snails1023
63 - Canary/Lacewood - old hippy {Bianca}
64 - Redheart/G Ebony - pwyll
Requested/In-Progress
- Holly/Hickory - Slot-Tech
- B Rosewood/Purpleheart - trouble2k
vv - B Walnut/Rosewood/MotherofPearl - banjar {Brett}
- Kingwood/Ivory -
vv - Wood Medley - my4jewels
If you need to make corrections please DO NOT quote or copy this list. PLEASE simply mention you have a list correction and give the mod number followed by the current/relevant information.
-----------------------------------------------------------
Unnumbered, unsigned prototypes:
Bottom Feeder Prototype - firhill
VV Non-Feeder Prototype - Poplar - Rockproof
Special editions:
PIF Hog - Poplar - ClayK
Production models:
1 - Poplar - Drottwiler {SS/Silkie Smooth}
2 - Poplar - *RETIRED* (from BiancaMontgomery {Bluff})
3 - Poplar - lthaver (from makeshiftJake, from FlyingV)
4 - Poplar - hairball (from landlord, from trouble2k)
5 - Poplar - Darkwitless (gifted by BiancaMontgomery)
6 - Birch/Bocote - trouble2k (from mfraz25, from BiancaMontgomery)
7 - Birch/Bocote - Queen (from SKYYcamel)
8 - Birch/Bocote - old hippy {Ayla} (from trouble2k)
9 - Birch/Bocote - Doots
10 - Birch/Bocote - BiancaMontgomery {My Precious}
11 - Birch/Bocote - ottie333 (from cleolove)
12 - Poplar - grandmato5
13 - Poplar - pwyll
14 - Poplar - TBM
15 - Poplar - Grammie {TaDa}
16VV - Poplar - VVFeeder Prototype - Rockproof
17 - Poplar - 2mtech {Hamton}
18 - Poplar - db13berry
19 - Maple/Bocote - ??? (from Fuginazole, from trouble2k)
20 - QSR Oak/B Palm - rtrain99 (from trouble2k, from BiancaMontgomery)
21 - QSR Oak/B Palm - Adam024 (from Landlord, from 2mtech, from Ma'am)
22 - Maple/Cocobolo - TxParamedic {Lil' Bit}
23 - QSR Oak/B Palm - Cherewine {Chanel} (from Lynleestar)
24 - Maple/Purpleheart - cleolove {Violet} (from pchela ~ cleo finally stole her away!)
25 - QSR Oak/H Negro - banjar {Bart}
26 - QSR Oak/H Negro - ZinniaBlaze
27 - QSR Oak/H Negro - trouble2k (from ime5000, from Cherewine)
28 - Maple/Bocote - nester12 (from GAC)
29 - Maple/Bocote - K*Rose
30 - Maple/Bocote - hairball
31vv - QSR Oak/B Palm - VVFeeder Prototype 2 (ORK-T Chip set) - Rockproof
32 - Blue and Ivory Staburl - MasonD {Purdy Piggy}
33 - Purpleheart/Canary - cleolove {Velvet}
34 - Canary/Purpleheart - vanZilla (from pchela)
35 - Canary/Purpleheart - pringles13
36vv - Cedar/Walnut - 2mtech {Wilbur}
37vv - Marblewood/H Negro - Mvgratz (from RIMP)
38VV - Cedar - coffm0 {Streaker}
39 - Canary/Purpleheart - Cherewine {Chloe}
40VV - Canary/H Negro - BiancaMontgomery {Veruca}
41 - Zebra/Black walnut - SinCityAngel (from MiXoLoGiSt)
42 - Jatoba/Treated Walnut - beezer (from Pickles05)
43 - Goncalo Alves/H Negro - dordas23
44 - Black Walnut/Yellowheart - trouble2k {Java}
45 - Black Walnut/Zebra - flying low
46 - Wenge/H Negro - db13berry
47 - Black Walnut/Bocote - HellaDank (from Slot-Tech, from SKYYcamel)
48 - Goncalo Alves/Yellowheart - flying low
49 - Purpleheart/Yellowheart - hot2trot
50 - Paduak/G Ebony - lrd3
51 - Maple/Yellowheart -
52 - Vera/B Rosewood - DavidTop
53 - Claro Walnut/Satine - Taniger1 {Misha}
54 - Wenge/Purpleheart -
55 - Bocote/B Ebony - cherewine {El Tigre}
56 - Ironwood/Sycamore - erich
57 - QSR Oak/Bocote -
58 - Bubinga/Curly Maple - Slot-Tech
59 - Hickory/B Rosewood - Dustykicks {Kona}
60 - B Walnut/Cocobolo - Washvap
61 - Jotoba/Cocobolo- kazz63758
62 - Jotoba/Lacewood - snails1023
63 - Canary/Lacewood - old hippy {Bianca}
64 - Redheart/G Ebony - pwyll
Requested/In-Progress
- Holly/Hickory - Slot-Tech
- B Rosewood/Purpleheart - trouble2k
vv - B Walnut/Rosewood/MotherofPearl - banjar {Brett}
- Kingwood/Ivory -
vv - Wood Medley - my4jewels
Hey, I have two non-feeders on request. QSR Oak/Blk Palm and Vera/Yellowheart. Just sayin'.
Variable voltage or 3.7? Or perhaps a regulated 5v chip in place of the vv chip?
Couple questions. What's the scoop with the magnet? Is that for 18500/490 batteries?
I put a LR 510 atty on that works on my other mod and it doesn't fire even after I cranked it down but the 306 LR works that works on that other mod as well. Why is that? I don't want to break anything.
Also the hose seems a bit short to go all the way up the needle and all the way down to the bottom of the bottle. In order to make it right I have the bottle floating off the bottom of the mod.
The door is very tight and still trying to figure out how to open it easier. I need to stick my finger in the hole and pry against the bottle which in turn fills the drip cup.
Aside from that it's beautiful.
I put a LR 510 atty on that works on my other mod and it doesn't fire even after I cranked it down but the 306 LR works that works on that other mod as well. Why is that? I don't want to break anything.
Also the hose seems a bit short to go all the way up the needle and all the way down to the bottom of the bottle. In order to make it right I have the bottle floating off the bottom of the mod.
The door is very tight and still trying to figure out how to open it easier. I need to stick my finger in the hole and pry against the bottle which in turn fills the drip cup.
Aside from that it's beautiful.
Last edited:
Some batteries are shorter than others, the magnet is to help with that. 18500 batteries would be 15mm shorter than 18650's though--that's over half an inch and I don't think Mike's included any half-inch long magnets with his Hogs.
You can try adjusting the center post on the atty. That's a problem that's had threads devoted to it since well before Mike offered his Mods for sale. Not all battery connectors are made the same and atomizer/cartomizer connectors vary immensely, sometimes even within the same brand.
Can't really say anything about this without seeing it. :shrug:
On the other hand, the tube doesn't have to go all the way up the needle, just make a decent connection.
That has been addressed as well. There is no pat answer as Hog's Mods are "organic creations." Being made of wood they can be very susceptible to factors such as humidity, which will make the wood swell. You could lightly sand the edges of the door to make the fit not so tight (a "fix" Mike has mentioned), but if the humidity falls significantly then the wood will contract again and the door will become loose. A couple of people have suggested soap (I would think bar soap rather than liquid). When doors would get tight when I was growing up we would sometimes rub them with paraffin or a white candle.
Hope at least some of this has helped
The magnet was orginally for 18650 IMR batts, ended up finding another spring that was longer and the magnets are not needed, I just kept including them for people until I ran out of them.
You are the 3rd person now that has informed me of certain attys not firing. The one atty I looked at that was sent to me that wouldnt fire ended up having the center pin on the bottom of the atty recessed a bit up into the atty and therefore was not making contact.
Depending on where you live the wood shrinks and swells, after a little bit of use they are easier to got off and on.
*EDIT
Yeah What Pwyll said
You are the 3rd person now that has informed me of certain attys not firing. The one atty I looked at that was sent to me that wouldnt fire ended up having the center pin on the bottom of the atty recessed a bit up into the atty and therefore was not making contact.
Depending on where you live the wood shrinks and swells, after a little bit of use they are easier to got off and on.
*EDIT
Yeah What Pwyll said
I said "24 hour support," but I didn't say you'd necessarily get your answer in the same 24 hours
I said "24 hour support," but I didn't say you'd necessarily get your answer in the same 24 hours
I didn't realize you were the answer guy. I was asking anyone. I appreciate all the help that's for sure and never doubt that I don't like the mod. I really dig it.
Now clue me in as I'm not familiar with the chain of command here. Hogwart is the owner as I see it and does a great job with fabrication. Now on the other hand are you self appointed tech support, the PR guy, or another pretty face? I'm confused and mean no disrespect as I enjoy having fun as well.
I think bottom feeders actually feed better with a shorter tube. If you get one that's too long, then you risk the chance of trying to suck no juice from the vacuum created from the bottom of the bottle. If you get to the end of a juice bottle, then it takes forever and a day to get the juice up to the atty connection.
Usually, we're left with three options. (1) Leave the tube up in the bottle a ways to allow the juice to flow freely. (2) Do a diagonal cut at the end of the tube to allow the juice to flow. Or, (3) cut the tube shorter.
Any of these work just perfect
Mike(Hogwart) is the owner/builder, Hot2Trot is his wife/boss lol, but not an owner or maker of Hog Mods, then there's me, Mike's lesbian. Then there's pwyll and Trouble...they know stuff and are very helpful. Everyone involved int the thread is helpful and friendly. We're all just one big happy Hog lovin' family around here.
lol, but not an owner or maker of Hog Mods, then there's me, Mike's lesbian. Then there's pwyll and Trouble...they know stuff and are very helpful. Everyone involved int the thread is helpful and friendly. We're all just one big happy Hog lovin' family around here.
Hey now! my Boss?? I still wear the pants in this house
(when shes not around)
(when shes not around)
The chain of command is Mike. He makes 'em, he sells 'em. When it comes to the Hogs, there is no one above him or below him--the buck starts and stops there. Of course he has a life outside the ECF and making mods-- he is married with kids, so he is also equal member of an anarcho-syndicalistic collective. This means Amy (hot2trot) is his boss outside of making Hogs and providing them to us.
So if you want definitive answers, Mike is your man. The rest of the family tries to help out, but you may not get a reply for a while depending on whether anyone's logged in and reading or not...
And I'm not the answer guy, I just happened to reply to your post first...
Mike(Hogwart) is the owner/builder, Hot2Trot is his wife/boss
Or, you know, what she said
The chain of command is Mike. He makes 'em, he sells 'em. When it comes to the Hogs, there is no one above him or below him--the buck starts and stops there. Of course he has a life outside the ECF and making mods-- he is married with kids, so he is also equal member of an anarcho-syndicalistic collective. This means Amy (hot2trot) is his boss outside of making Hogs and providing them to us.
So if you want definitive answers, Mike is your man. The rest of the family tries to help out, but you may not get a reply for a while depending on whether anyone's logged in and reading or not...
And I'm not the answer guy, I just happened to reply to your post first...
You were very helpful
Then perhaps you should wear a skirt more often. I've found it much easier to influence the wife when I'm wearing a kilt than it ever is when I'm wearing pants.
Me, in pants: "(anything, really)"
Wife: "Oh, you think so, do you? Well let me tell you, Mr. Man..."
Me, kilted: "(almost anything)"
Wife: "Anything you say, dear..."
- Status
Similar threads
