Status
Not open for further replies.

pringles13

Vaping Master
ECF Veteran
Verified Member
Jul 30, 2011
4,994
6,819
jaw-juh
Ummm...I put the cloth on my leather seats in the summer not to keep from messing up the seats, but to keep from losing three layers of skin every time I get out of the car. They're not nearly as bad as vinyl, but they do get sticky when the sweat starts flowing ;)

Ewh.......
 

eyebedam

Ultra Member
ECF Veteran
Verified Member
Sep 14, 2011
1,444
1,466
Mt. Juliet TN

Dustykicks

Full Member
Verified Member
Feb 24, 2009
30
33
SW Ohio
3:30...? :ohmy: God, that's painful. It does justify eating while curled up on the couch tho... :p

Hey guys, hope everyone is having a good day! Just got home from work and got THERE at 3:30am. TIRED girl! ME and Misha are going to go and cuddle up on the couch with a steak, potato and Season 3 of Supernatural!! Has a goot night!
 

washvap

Vaping Master
ECF Veteran
Apr 2, 2011
6,018
4,442
wa
Forgot to put up a pic:

2011-11-16194935.jpg
 

Hogwart

Unregistered Supplier
ECF Veteran
Jun 21, 2010
1,370
1,696
49
Granite Bay, CA
Pulling forward to answer questions I have recieved.

Please all keep in mind I build these mods as a hobby, It is not my full time job. I apoligize is the wait for a mod is longer than expexted but I believe it will be worth the wait once your Hog is in your hands.

Here's the rough requesting process...
Once a batch is sold I will open up requests for mods, when I have 10-15 requests requests will be closed untill that batch is finished. When a request is made you will be able to choose...

1. Type of wood for body
2. Type of wood for caps and inlay
3. Black Switch or Stainless Steel Switch(add $5)
4. 3.7v using 18650 batt and 6ml bottle $110, VV using 18350 batts and 6ml bottle $160, 3.7v non-feeder $90, or VV non-feeder $140
5. Gloss or Matte Arm-R-Seal finish (best protection), Tung Oil finish, Danish Oil finish, Boiled Linseed Oil finish, or Teak Oil finish
6. Choice of LED bottle illumination. Choices are White, Blue, Red, Purple, Green, Yellow, and No LED

Shipping $5

The voltage regulator that in used in the the VV's can be found here 3A Adjustable step down switching voltage regulator

Your Hog will come with 2 bottle assemblies, extra bottle assemblies are available at $2 each.

When a request for a mod is made It will go into a journal of mods to make in what order and I will do my best to get it made in a timely fashion. Understand that I build these after work and a little on the weekend and "Timely" might mean it might take a few weeks.

When the requested Mod is finished I will contact the person that has requested the Mod and they will have 3 days to Pay for the mod so that it can be shipped. If payment is not made within those 3 days the Mod will be offered up to first come, first serve on the forum.

I will try to keep the mods coming out in order of of requests but please understand that if I have wood on hand to finish someones mod request that was placed after yours but I'm still waiting on your wood to ship, theirs will most likely be done first.

I will post a list of wood I currently have access to locally before I start taking requests. If the wood you desire is difficult to obtain or quite a bit more costly than the exotics I have available locally, the cost of your mod might slightly increase in price or require a deposit to obtain your wood. This will be discussed with you after your request has been made and I can locate your desired wood.

If you wish to request a mod made from Staburl, I will do my best to accomodate you. Since the color variation from block to block varies so greatly and some blocks come with voids that can not be worked around, I will not be purchasing the Staburl myself. If you wish to have your Hog made from Staburl you will have to purchase the blocks yourself and have them shipped to me. But please be aware that I can not garantee that your blocks will be usuable or that your blocks are exactly the color you were expecting once finished. And also be aware that I am very careful when using Staburl but at times it does like to chip out, accidents happen no matter how careful I am. I will not be held liable if your block does not make it through the tooling process. Regular Pricing applies.

The Hog mod is really a beautifully made wooden mod in its simplest form. There are no extra frills in a Hog that adds to the bulk of the mod which make a Hog one of the smallest Wooden Mods on the market today not to mention one of the least expensive. There is no Master on/off switch. if you wish to throw your Hog into your purse or pocket, I recommend unscrewing the atty a turn or popping the battery out.

I'm not sure how many Bottom feeder vendors will tell you something like this but I will, THE HOG MOD DOES NOT LEAK, PERIOD

Here is where I would post some tips and tricks for you about how to use the Hog and remedy any issue you might have.
If and when an issue ever come up with a Hog I'll fill this spot in. =)

Ok Ok there is one tip from BiancaMontgomery on the easiest method for filling you bottle in the Hog.
Hog Mod easy bottle fill - YouTube

We also have the first video review of a 3.7v Hog.
Kanal von aught3firefly - YouTube <--Pchela Youtube Hog Review

Here we have a couple written reviews
http://www.e-cigarette-forum.com/fo...-saved-my-relationship.html?highlight=Hog+mod
http://www.e-cigarette-forum.com/fo...s-great-mod-modern-art.html?highlight=Hog+mod


If you currently own a Hog, please feel free to share your pics in the Family photo album
http://www.e-cigarette-forum.com/fo...how-us-your-hog.html?highlight=Hog+mod+photos


Here is a list of the wood I have on hand in the garage.
All has been wet down to show rough look of finished wood. Most will be just a tad bit lighter than shown.

Wood for Bodies

Top Row, left to right: Black Walnut, Marble Wood, Bolivian Rosewood, TN Red Cedar, Canary Wood, Purpleheart.
Bottom Row, left to right: Zebra Wood, Maple, Goncalo Alves, Quarter Sawn Red Oak, Wenge
IMAG0598.jpg


Wood I have for Caps and Inlays
Top row, Left to right: Walnut, Very Orange Cocobolo, Purpleheart, Yellowheart, Black Palm, Zebra Wood
Middle row, left to right: TN Red Cedar, Canary Wood, Lacewood, Bocote, Marble Wood
Bottom, Bolivian Rosewood
IMAG0599.jpg


Wood I can get bodies as well as caps and inlays from
Bolivian Rosewood
IMAG0603.jpg


Vera Wood
IMAG0604.jpg


Curly Maple
IMAG0605.jpg


Satine
IMAG0606.jpg


Ironwood? I have enough of this for a couple Mods Several woods are refered to as this and I do not know which this is exactly =(
IMAG0607.jpg


Adding to the list. These will be bodies, caps, and inlays.

Left to right: Sapele, Figured Claro Walnut, Sycamore, Holly
IMAG0609-1.jpg


Left to right: Kingwood, Yellowheart, Padauk
IMAG0614-1.jpg


Left to right: Bocote, Cocobolo, Redheart
IMAG0617-1.jpg


Left to right: Claro Walnut, Hickory, Bubinga
IMAG0620.jpg


So the list so far of woods on hand are as followed.
Added cost for certain woods if used for main body in red. Half that cost if used for Caps and inlays.


Maple
Curly Maple + $10
Purpleheart
Yellowheart
Redheart + $10
Quarter Sawn Red Oak
Marble Wood
Black Walnut
Figured Claro Walnut
Claro Walnut
Canary Wood
Goncalo Alves
Wenge
Birch
Vera Wood + $10
Bocote + $10
Cocobolo + $10
Bolivian Rosewood
Holly + $15
Kingwood + $10
Bubinga
Tenessee Red Cedar
Hickory
Padauk
Sycamore
Sapele
Satine
Jatoba
Gaboon Ebony $15
 
Status
Not open for further replies.

Users who are viewing this thread