House of Hybrids featuring the Zenesis PV

[vanZilla]

Background or text?

Light grey background with black text would produce the least amount of eyestrain. You could also try using a white background with a medium to dark grey text, your eyes should tell you what works best for you.

This is off the top of my head, it was about 10 yrs ago when I was studying the 'Science of Color' .. the basic principle is the greys are 'neutral' and don't burn out the color rods in your eyes.

Hope that helps.

 

[Mr. P]

The standard will be too long for an ACU pocket but the mini will fit nicely. (recently retired 1SG, I know the ACU)

 

[Njt07]

The standard will be too long for an ACU pocket but the mini will fit nicely. (recently retired 1SG, I know the ACU)

Nice thanks, I don't use more than 3-4 mils a day anyway so this is perfect, now to see if my fav batt store has the batts in stock...

 

[LibertariaNate]

Light grey background with black text would produce the least amount of eyestrain. <snip>

Hope that helps.

That's what I figured you meant. Just wanted clarification. Thanks!

 

[vicsan]

Ok now I am a tad bit worried. I havent received a confirm from Zen about the payment yet. I know he is busy now, just wondering if all febbers have received a confirm and I some how accidentally fell off Zens list of something?

To the more educated lot here, I have some questions: Can the Zenesis be kept in a lying down or upside down position for prolonged periods of time? Since the Zenesis has 2 holes on the top of the tank, 1 for the wick and one to fill, would the juice not flow into the atomizer chamber and eventually leak out?

Are the magnets in the switch strong enough to not require a lockout mechanism even for everyday pocket carrying? This is the only thing that concerns me a little about the Zenesis. Maybe someday Zen can make a lockable switch module ?

You can lay it down without it leaking. I asked the same question, way back when: http://www.e-cigarette-forum.com/fo...rids-featuring-zenesis-pv-15.html#post4919078

From my understanding, the magnet resistance is quite strong and won't easily fire in a pocket.

 

[Zen~]

Ok now I am a tad bit worried. I havent received a confirm from Zen about the payment yet. I know he is busy now, just wondering if all febbers have received a confirm and I some how accidentally fell off Zens list of something?

I have TWO confirmations sent to you in my sent items folder... Maybe third time in the thread is the charm.

Yes, you are all set.

 

[Zen~]

You can lay it down without it leaking. I asked the same question, way back when: http://www.e-cigarette-forum.com/fo...rids-featuring-zenesis-pv-15.html#post4919078

It can leak if it's in exactly the right position... if the filler hole is towards the bottom and you have a pretty full tank, some juice will get in the top section, and IF the air hole is pointed down at the time some juice can come out, otherwise it drains back into the tank or gets used up by the atty once it is upright again.

Leaking CAN happen, but it takes a specific series of things to make it happen.

 

[Zen~]

Good lord this is a long thread... ran across this thread read through about 40 pages then went to the last few pages, and am VERY interested.

You missed a LOT of information in the 3000 posts you skipped over! Possibly including a price increase and lists opening and closing.

But most of the Zenfidels can answer any question you may have with a high degree of accuracy. We have the best educated vapers in the world in this thread!

 

[darco]

I have TWO confirmations sent to you in my sent items folder... Maybe third time in the thread is the charm.

Yes, you are all set.

Wow thanks Zen! Funny I have been staring at my inbox for 2 days now and hadn't had a single message! Forum software can get glitchy too

 

[Zen~]

Wow thanks Zen! Funny I have been staring at my inbox for 2 days now and hadn't had a single message! Forum software can get glitchy too

Considering the volume of PMs this software must be processing, I'm surprised it's not a bigger issue!

 

[bumpi]

Another atty burned out this one was one of those $22 ones...uggggghhhh it was only a week old!! It had much better performance than the Chinese ones, but I wanted it to last a month or two. March can't get here fast enough

 

[sinnyc]

Another atty burned out this one was one of those $22 ones...uggggghhhh it was only a week old!! It had much better performance than the Chinese ones, but I wanted it to last a month or two. March can't get here fast enough

Wow. I have 2 DCA's with MA306 attys in each and I've been hammering on both for a month with no issues. I was worried about the one that I put a pretty dark & sweet juice in so I've been blowing it out every 2 or 3 days. I've blown out the other one once. They're about $6 each so maybe give those a shot.

- Tim

 

[Kalimero]

Another atty burned out this one was one of those $22 ones...uggggghhhh it was only a week old!! It had much better performance than the Chinese ones, but I wanted it to last a month or two. March can't get here fast enough

I love those. How did that happen?

 

[bumpi]

Wow. I have 2 DCA's with MA306 attys in each and I've been hammering on both for a month with no issues. I was worried about the one that I put a pretty dark & sweet juice in so I've been blowing it out every 2 or 3 days. I've blown out the other one once. They're about $6 each so maybe give those a shot.

- Tim

Thx, do u know if they have 510s? I've had joye 510s last over a month and they are like $8, but the performance on these HH357's is top notch, I ordered 2 and am hoping this one lasts me till march...If I get this one to last over a month I would use these exclusively (when using an atty)

 

[bumpi]

I love those. How did that happen?

Idk, it was working great. I was vaping and it got to that add more juice point, put a few more drops in and it wouldn't fire....out of the blue. Hannah said to mail it back to him so he could check it out, and if it was defective he'd send a replacement

 

[bumpi]

Idk, it was working great. I was vaping and it got to that add more juice point, put a few more drops in and it wouldn't fire....out of the blue. Hannah said to mail it back to him so he could check it out, and if it was defective he'd send a replacement

Then I just went outside to go to post office and my truck tire is dead flat....maybe it's just not my day. Lol. Time to bust out the jack and tire iron, I'll catch up on thread later hope the rest of the zenfidels are having a better day than me

 

[Kalimero]

Idk, it was working great. I was vaping and it got to that add more juice point, put a few more drops in and it wouldn't fire....out of the blue. Hannah said to mail it back to him so he could check it out, and if it was defective he'd send a replacement

I like that about Hanna, he´s so fair about his products.

 

[sinnyc]

Thx, do u know if they have 510s? I've had joye 510s last over a month and they are like $8, but the performance on these HH357's is top notch, I ordered 2 and am hoping this one lasts me till march...If I get this one to last over a month I would use these exclusively (when using an atty)

Nope, the MA306's are 306 only so you'd need a drip tip or of course the DCA. Check out the Good Sense Vapor site.

- Tim

 

[Zen~]

OK, so lets talk for a minute... hypothetically speaking...

IF by chance, I found a crystal clear material that exceeds the ability of Pyrex to be impervious to liquids... ie. your juice has absolutely NO ability to damage it... and by chance, I can get it in the correct tubing size to use as the tank on the Zenesis PVs and Z-attys...

And what if there was NO additional machining required to make this happen...

The only thing is waiting to have the material cut may take a week... but we are already delayed by the machine shop anyway...

And I am 98% percent certain based on thorough and exhausting calculations that there is plenty of clearance and it won't have the thermal expansion issue....

Those are the upsides...

The downside possible delay of a few extra days...

It's expensive... but not to worry, I'm not changing the price of anything, I'm just commenting that it's expensive and replacement tanks will cost a bit more...

Anyway...

By my calculations, experiments and knowledge of materials, I would like to propose that the Zenesis Hyprid PV and and Z-attys... starting with THIS shipment... would be the FIRST and ONLY PV or tank for that matter to be supplied with...

A Fused Quartz Tubing Tank section.

It blows Pyrex out of the water...

It's EXOTIC!

And it's what REPLACED Pyrex in most serious labs.

Because it's better...

This is exciting stuff... should we do it?

Zenfidels... ESPECIALLY the Febbies...

What say you?

 

[Cardslinger]

OK, so lets talk for a minute... hypothetically speaking...

IF by chance, I found a crystal clear material that exceeds the ability of Pyrex to be impervious to liquids... ie. your juice has absolutely NO ability to damage it... and by chance, I can get it in the correct tubing size to use as the tank on the Zenesis PVs and Z-attys...

And what if there was NO additional machining required to make this happen...

The only thing is waiting to have the material cut may take a week... but we are already delayed by the machine shop anyway...

And I am 98% percent certain based on thorough and exhausting calculations that there is plenty of clearance and it won't have the thermal expansion issue....

Those are the upsides...

The downside possible delay of a few extra days...

It's expensive... but not to worry, I'm not changing the price of anything, I'm just commenting that it's expensive and replacement tanks will cost a bit more...

Anyway...

By my calculations, experiments and knowledge of materials, I would like to propose that the Zenesis Hyprid PV and and Z-attys... starting with THIS shipment... would be the FIRST and ONLY PV or tank for that matter to be supplied with...

A Fused Quartz Tubing Tank section.

It blows Pyrex out of the water...

It's EXOTIC!

And it's what REPLACED Pyrex in most serious labs.

Because it's better...

This is exciting stuff... should we do it?

Zenfidels... ESPECIALLY the Febbies...

What say you?

I'm a Marcher so I would most likely get this whatever is decided now for the Febies.
But you said 1 thing that would make me vote for the QUARTZ and a slight delay - "Because it's better... "
& that says it all
JMO