Oh, how I LOVE Damascus steel... And Mokume Gane...
But... no... the Dragon won't be made of either of those.
- Status
Oh, how I LOVE Damascus steel... And Mokume Gane...
But... no... the Dragon won't be made of either of those.
Let me guess.... the dragons will be bedazzledwith your personal birthstone.
I would rather embellish them with my personal vomit.... NO!
I'm expecting the Zenesis to be my primary pv as well. I can't stand cartos. I have had very little success if any with cartomizers. The best vape experience I am getting to date is with the ikenvape i06 atty and my Darwin. the only problems with this setup is that it can get messy if I over drip, and dripping isn't always convenient when doing things like driving a car. Because of these two issues, I plan on using the zenesis as my all day pv. I'll use the Darwin and i06 combo as my multi juice/tester/switch it up PV.
Last edited:
He knows what the battery size, is as his been able to get an inside track info about an upcoming newer version of the battery from AW
Good one. Another thought... from remembering what he said way back in the thread when talking about the Dragon and the Limited.
It could also be a MEGA juice tank...like the 12ml he had on the 2011 Limited.
It's a Fused Quartz 12ml Dragon Tank. Staying within the manufacturing specs of a previous model.
Greetings you lucky Zenfidels! Just checking in. I still read this thread with a state of wonderlust. Maybe one day, I too, will be able to own one of these beautiful PV's. At least I will get a Zenjector when they come out...
Have a great day vapers...
and you too ( a bit late, had to work 6am to 630pm lol) you'll have to trust those of us that have the chance to or will be able to very shortly to say that they are awesome PV's and pieces of art... If you like the idea of cleaner tasting flavor and vapor, a little tinkering/experimenting (rebuilding the atty), then you wouldnt be dissappointed here....they are the easiest rebuildables to work with....I've had first hand experience with others, AND also own an Odysseus and iatty.....the zenesis rebuildables in my opinion, blow them away. I wasn't planning on the Zenjector myself, but with having more than one Zen mod soon, using a boring every-day plastic or SS/pyrex syringe gets to be a pain.....so I will be adding one to my collection, and the syringes will be retired... besides, they'll match the zenesis mods
If it wasnt for the fact I'm using Zen~'s proto GG unit, and for the fact that the atty surrounding poly is starting to give out, I'd be taking it with me all over the place....at home, it's ALWAYS in my hand....my provari or GGTS / ody in the other, always a rebuildable unless I'm sampling juices, then I have one of my GG's or GLV's topped with an atty for that purpose..... once I recieve my brand new Zenesis mods, I'll have one in each hand
....well maybe 2 in each hand...probably 2 in each hand....who am I kidding, I WILL have 2 in each hand.....heeheehee
Well... right now I have about 8 tanks and 4 Stardusts, 2 bottom feeders and an "unnamed" genesis in front of me, all with different flavors. I'm hoping for my Zenesis to become my main PV, with the others just hanging around for a change of flavor.
LOL! I'm just thinking if this works, the juice collection in the tank after a day of me dripping eleventy-five different flavors would be really interesting!
shhh...he already has with a few of us.....he has MANY secrets....nope I wont pass em on
Well... right now I have about 8 tanks and 4 Stardusts, 2 bottom feeders and an "unnamed" genesis in front of me, all with different flavors. I'm hoping for my Zenesis to become my main PV, with the others just hanging around for a change of flavor.
LOL! I'm just thinking if this works, the juice collection in the tank after a day of me dripping eleventy-five different flavors would be really interesting!
...hmm...I own a provari (and a back up very shortly as well) soon to be z-atty topped... 3 ggts/stealths, one w/ ody, one w/ iatty...the 3rd will be (and currently with prototype) z-atty topped... a glv xl, a glv-3 mini top and bottom feed option....zenesis standard soon to arrive, mini following soon...zenjector and dragon will also add to the collection... I still may pick up 2 more z-atty-g's and another provari version...gotta have spares, especially when you have backup mods w/o them... atm I have 6 mods in front of me....all but one with tank or bottle filled with a different flavor.....the 6th is being used for dripping atm (glv xl)....I've given away 4 out of 7 carto tanks, most of my dc carto's, most of my atty's (holding a few back for back ups just in case of zombie apocalypse)...and have plenty of resistance wire, adequate amt of wick for my gg rebuildables and will have plenty of mesh/wicks for my zen mods very soon....with all my survival stuff around here... "I'll be ready for anything..."
NOPE...I already know what he's planned for materials...no one's even close.......................... for your sb, you could always get a z-atty-u to top it off..then you'll have 2 zen mods going
Last edited:
How do the z-atty-g and Pro make their power connections? Is it a contact point or a threaded connector? I have been pondering ways to modify my homemade VV PT(12v 4amp psu 2.1mm) to make use of the solid connection those 2 models offer. I do have a Z-atty u coming for my SB/PT. The more I use the devices though I don't like the 510 connection being the stress point in any OOPS situation. I may be able to make some sort of shield around the 510 on my PT for the z atty- u to get a similar result
Last edited:
the z-atty-g unit replaces the whole connector and control tank assembly on a GGTS, or connector on a stealth...it has a built in connector cap as part of the assembly.....
I dont have my beta unit yet (if I did, you'd have pictures to back me up), but, the provari version will still screw on like any other 510 device, but without all the gap and space around it, to make it nice and neat, more pleasing to the eye, make it look complete
there are some prototype pictures in the thread that show what both should look like
I dont have my beta unit yet (if I did, you'd have pictures to back me up), but, the provari version will still screw on like any other 510 device, but without all the gap and space around it, to make it nice and neat, more pleasing to the eye, make it look complete
there are some prototype pictures in the thread that show what both should look like
Last edited:
mmmmmmmm... I ordered one adjustable flow cap drip tip from CoV last week, and it arrived today. it is sitting on Zen~'s gg proto atty atm... at first i wasnt sure how well they would work after seeing scott bonner's (igetcha69 on youtube) video about it, but after attaching it to the zen atty, playing with the adjustability (dont need much ), I'm liking it... for those that like a tighter draw, it works well...for those that dont, it works well there too. the one other thing I like about it, you can shut off ALL air flow with it. for some mods, it's a little extra added protection from leaking juice....I know quite a few of us have experienced putting a mod in a pocket, bag or purse, and juice leaked from the drip tip not fun... yep I will be ordering a bunch more..probably one for each of my mods...gotta be prepared for the zombie apocalypse...
), I'm liking it... for those that like a tighter draw, it works well...for those that dont, it works well there too. the one other thing I like about it, you can shut off ALL air flow with it. for some mods, it's a little extra added protection from leaking juice....I know quite a few of us have experienced putting a mod in a pocket, bag or purse, and juice leaked from the drip tip not fun... yep I will be ordering a bunch more..probably one for each of my mods...gotta be prepared for the zombie apocalypse...
I broke down and made a geni atty today after work Im having wicking issues though still getting burnt taste bleh!
no worries...they both attach the same way but, the biggest difference between a GG connector cap and the one for the Z-atty.... Zen's has a stationary battery contact in it, one of the things I don't care much for in Imeo's is that damned moveable contact pin(also a bad place for juice leakage as it flexes side to side under load from each side of the connector
)
Where is your air hole in relation to your wick/coil & are you getting any shorts in your coil? Those are 2 things I've found that can give you bad taste in short order. Also, what pg/vg ratio juice & mesh are you using?
using mesh wick bro? may not be oxidized enough / properly... I've found that a few more burns w/ more juice each time, helps that out a bit.... ive heard a few peeps give up on mesh wick rebuildables because they didnt do it enough, so they dont wick the way it's supposed to...patience grasshopper...
edit: blah forgot that zen's video talks about that too...
air hole is perpendicular from wick wick is 325x325 80/20 vg/pg coil doesnt seem to have any shorts...how can I tell its firing every time no red glow on kanthal and been soaking it every two or three fires....
- Status
Similar threads
- Locked
