House of Hybrids featuring the Zenesis PV

Status
Not open for further replies.

TitanRich

Super Member
ECF Veteran
Verified Member
Aug 30, 2011
542
888
Chicagoland/NWI
I see it says your in FL. Do you live down south? If so, you have any more tubing?

Scott, you have to have a Menards or Home Depot near you. The should have some clear tubing (I don't recall which poly it is). It will be rolled up. Get a foot or two and a wood dowel. Put the tubing on the dowel and lightly heat with a hair dryer to correct the shape, cut to size and use in a pinch. It's going to be a little thick, but I think it'll get you by. Make sure you wash it with soap and water, too.
 

Scottinboca

Vaping Master
ECF Veteran
Verified Member
Oct 14, 2011
3,678
3,775
Planet Vapton
I did that and it leaks, I needed to put teflon tape all over it to get it not to leak. :cry:
Scott, you have to have a Menards or Home Depot near you. The should have some clear tubing (I don't recall which poly it is). It will be rolled up. Get a foot or two and a wood dowel. Put the tubing on the dowel and lightly heat with a hair dryer to correct the shape, cut to size and use in a pinch. It's going to be a little thick, but I think it'll get you by. Make sure you wash it with soap and water, too.
 

Zen~

Unregistered Supplier
ECF Veteran
Sep 12, 2010
6,024
21,316
Spencerport, NY
I did that and it leaks, I needed to put teflon tape all over it to get it not to leak. :cry:

Great googley moogley... Would ya just send the darned thing to me so I can update it and get you going? You been futzing with it for day's, it could have been on its way back to you by now.
 

Zen~

Unregistered Supplier
ECF Veteran
Sep 12, 2010
6,024
21,316
Spencerport, NY
So i have a box of zenesis mods waiting for me at the customs office. I've been trying to find time to get them but my work is just too toxic these past few weeks... And probably for the whole year.

I've been thinking about it for almost 2 weeks now, i'm about to go nuts!

Yeah, that's making me insane that they are sitting there!
 

quynhwil

Super Member
ECF Veteran
Verified Member
May 30, 2010
678
600
ohio
Can someone tell me how the vapor is suppose to be on the standard. What I'm asking is, does the amount of vapor increase as the wick get older. I mean I have my standard for a few week now and the vapor production is not like I expected. I compare my vapor with some of the video review and ask myself, How do they get so much vapor? It's all about vapor for me.
Can someone help answer this question for me. I'm really at the breaking point again.
Oh another question for ZEn. Is the battery on the new switch suppose to rattle up and down? I goy the new standard yesterday and put in an AW IMR 1600, it rattle when you move it up and down. TIA
 

lorderos33

Ultra Member
ECF Veteran
Verified Member
Mar 6, 2011
2,226
1,563
FL
well I did it again. broke a device.

I snapped a coil somehow.

I tried to get the wick out but it was really stuck. It broke inside. Now the plastic thing that the wick goes in is all messed up.

zen PM coming. Did not really even get to use it all that much.

Now we know who to send prototypes to for durability testing ;)
 

Ma'am

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2010
2,932
5,364
Florida
Good morning Zenfidels!!

I've got a problem again.....

Had a little problem with the switch at first, got that fixed. (Thanks Zen!!!) Then it was coil shorts, fixed that too. Had to figure out how to use it so that my wick was good and wet all the time so that there were no more dry hits, and all I get now is great tasting, clouds of vapor hits. And now, after all this, and going through the learning curve (for me the curve was 5 miles long) with my mini Zenesis, I've got another problem with my mini... I'm posting so ya'll can prepare for this, I wasn't and I'm having a meltdown over it.

My mini Zenesis has taken over, I no longer own it, it owns me. It's also done something to all my other mods, cartos, and attys because they longer taste right, they're off now! The great taste that they used to have has faded terribly, kinda reminds me of the burning paper taste that I used to get when I smoked. It's frightening and I'm scared now!

The mini Zenesis sits beside me right now, and it's taunting me. It's telling me to keep it close, better not let it get misplaced to where I can't find it quickly because if that happens, I'm going to be in a world of hurt!! AAAAAKKKKKK!!! I think I'm just this side of a panic attack!!!!

Can someone help me, please?!?! Is there anyone who knows how to make time go by faster so May will get here like yesterday?!?! I really need to get another Zenesis, I'm terrified that I've got only one Zenesis because if something happens to my mini, OMG just broke out in a cold sweat!!
 

kcos

Unregistered Supplier
ECF Veteran
Feb 5, 2011
3,245
6,439
Rochester, NY
mawnco.com
Good morning Zenfidels!!

I've got a problem again.....

Had a little problem with the switch at first, got that fixed. (Thanks Zen!!!) Then it was coil shorts, fixed that too. Had to figure out how to use it so that my wick was good and wet all the time so that there were no more dry hits, and all I get now is great tasting, clouds of vapor hits. And now, after all this, and going through the learning curve (for me the curve was 5 miles long) with my mini Zenesis, I've got another problem with my mini... I'm posting so ya'll can prepare for this, I wasn't and I'm having a meltdown over it.

My mini Zenesis has taken over, I no longer own it, it owns me. It's also done something to all my other mods, cartos, and attys because they longer taste right, they're off now! The great taste that they used to have has faded terribly, kinda reminds me of the burning paper taste that I used to get when I smoked. It's frightening and I'm scared now!

The mini Zenesis sits beside me right now, and it's taunting me. It's telling me to keep it close, better not let it get misplaced to where I can't find it quickly because if that happens, I'm going to be in a world of hurt!! AAAAAKKKKKK!!! I think I'm just this side of a panic attack!!!!

Can someone help me, please?!?! Is there anyone who knows how to make time go by faster so May will get here like yesterday?!?! I really need to get another Zenesis, I'm terrified that I've got only one Zenesis because if something happens to my mini, OMG just broke out in a cold sweat!!

I know the feeling I can't believe the taste difference. I don't want to use anything else. But I'm lucky I live in the same city with zen so if anything goes wrong I can run to him. LOL Not so sure zen is so happy about that. HEHE, Hey have I told you lately thatI LOVE MY MINI !!!
 

Ma'am

Ultra Member
ECF Veteran
Verified Member
Apr 7, 2010
2,932
5,364
Florida
I know the feeling I can't believe the taste difference. I don't want to use anything else. But I'm lucky I live in the same city with zen so if anything goes wrong I can run to him. LOL Not so sure zen is so happy about that. HEHE, Hey have I told you lately thatI LOVE MY MINI !!!

You're so lucky, and having peace of mind being so close to Mike has got to be priceless! :)

And thank you for the beautiful SS polished mini mawn tip, nothing else is good enough for my mini Zenesis! They look like they were made for each other and I love the feel of it! It's fantastic, and I'm so glad I had enough sense to get two of 'em! :)
 

sl_rat

Ultra Member
ECF Veteran
Sep 14, 2009
2,703
4,278
Western, NY
Can someone tell me how the vapor is suppose to be on the standard. What I'm asking is, does the amount of vapor increase as the wick get older. I mean I have my standard for a few week now and the vapor production is not like I expected. I compare my vapor with some of the video review and ask myself, How do they get so much vapor? It's all about vapor for me.

check your wick position in relation to the vent hole. hole near wick= more vapor
 

Mr. P

Ultra Member
ECF Veteran
Verified Member
May 18, 2011
1,853
2,376
Ga.
Can someone tell me how the vapor is suppose to be on the standard. What I'm asking is, does the amount of vapor increase as the wick get older. I mean I have my standard for a few week now and the vapor production is not like I expected. I compare my vapor with some of the video review and ask myself, How do they get so much vapor? It's all about vapor for me.
Can someone help answer this question for me. I'm really at the breaking point again.
Oh another question for ZEn. Is the battery on the new switch suppose to rattle up and down? I goy the new standard yesterday and put in an AW IMR 1600, it rattle when you move it up and down. TIA

The vapor will mainly depend on your juice and how your Zenesis is wicking. The higher the VG ratio the more vapor you will have. PG gives off very little vapor but does hold the flavor a little better than VG. In other words don't compare your vapor to someone elses unless you have the same mixture. Someone with a 80/20 PG/VG mixture will not blow the same cumulus clouds as someone with a 20/80 mix.

As for the batt question, the 1600's do rattle a little bit as Zen had to design the Zenesis for the 2000's which are a tad bit longer since they quit making the 1600's. Many have used a little magnet to help take up the space and it will also help fire with your older switch.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread