House of Hybrids featuring the Zenesis PV

[RippleInStillWater]

Unthread the battery cover/switch one turn and it's off...



The VAST majority of the people asking for the adjustable draw cap have come to prefer the open draw that the Zenesis has... but the stiff draw cap will be available a week from monday, and that adjustable draw will be near the end of July.


There's no dingos here... just really a busy guy that didn't finish Scotts PV until this afternoon.

I've had no problems with misfires yet, I'm pleasantly surprised..

I've gotten used to the draw so much I now prefer it....

I really don't like their berries of the dingos (what, you never heard of dingo's berries?!?!?!?)......its late and bad puns are funny to me right now!!!

 

[emonty]

Ok, I have a question.......no I don't...........have great Sunday!

 

[JollyRogers]

10-24 x 5/16 and resist the urge to get a flat top screw... it needs to be rounded for the switch to work as designed.

Thanks Mike.

 

[zygote]

where is everybody? i'm so lonely

 

[Bamrz]

where is everybody? i'm so lonely

It's raining here, so I'm doing laundry, watching sci-fi, reading Game of Thrones and puffing happily on my Standard!

 

[zygote]

It's raining here, so I'm doing laundry, watching sci-fi, reading Game of Thrones and puffing happily on my Standard!

you lucky bas...... uhhh dog! raining here too, just starting so better get some errands done myself.

 

[Zen~]

where is everybody? i'm so lonely

I'm busy setting up the Z-Atty assembly fixtures... These devices require a whole new range of gizmos to assemble them properly. I'm also spending today finishing up the backlog of parts and zencessory orders so I can get the febbie upgrades rolling.

 

[RippleInStillWater]

I'm busy setting up the Z-Atty assembly fixtures... These devices require a whole new range of gizmos to assemble them properly. I'm also spending today finishing up the backlog of parts and zencessory orders so I can get the febbie upgrades rolling.

I was just going to ask how those Z-atty-Gs were coming along.......

 

[zygote]

I'm busy setting up the Z-Atty assembly fixtures... These devices require a whole new range of gizmos to assemble them properly. I'm also spending today finishing up the backlog of parts and zencessory orders so I can get the febbie upgrades rolling.

morning zen~ somebody is having probs w/ leakadge, i posted in zenfidel group thread in issue for early adapters with an idea, take a look sir,it's somethig else for you to do, somehow i think it was addressed already

 

[sachavaca]

any timeline for ss tanks zen?.

 

[JollyRogers]

I'm busy setting up the Z-Atty assembly fixtures... These devices require a whole new range of gizmos to assemble them properly. I'm also spending today finishing up the backlog of parts and zencessory orders so I can get the febbie upgrades rolling.

Well that is good news then... Waiting for my Z-ATTY and am a febbie owner...

Wedding day here. Our son is giving us a new daughter-in-law today Friday was the rehearsal and dinner (set me back a bit, hence I refrained from any Ti mods), yesterday we went and unloaded a Glock, Ruger P89, some .45ACPs and my wife even shot her .38 some... then drank a lot of beer and cooked out in the garage because of the rain. So today we have an evening wedding and reception, in the rain!!!

 

[zygote]

Well that is good news then... Waiting for my Z-ATTY and am a febbie owner...

Wedding day here. Our son is giving us a new daughter-in-law today Friday was the rehearsal and dinner (set me back quit a bit, hence I refrained from any Ti mods), yesterday we went and unloaded a Glock, Ruger P89, some .45ACPs and my wife even shot her .38 some... then drank a lot of beer and cooked out in the garage because of the rain. So today we have an evening wedding and reception, in the rain!!!

what, no shotgun lol lol lol lol lol gotta go, wifey wants to show me off all over town before the big blow.

 

[JollyRogers]

what, no shotgun lol lol lol lol lol gotta go, wifey wants to show me off all over town before the big blow.

LOL. No the shotgun wedding was mine and my wife's 25 (or was it 26) years ago in BFE South Carolina... Love her pop, as he is the best, but he is just a little crazy also

 

[stealfdawg]

CHECKING IN...

first off I want to clear up some thing I AM NOT SERENITY LEATHER
SECONDLY FOR THOSE WHO ARE FAMILIAR WITH MY WORKS I AM NOT AND HAVE NOT CLAIMED TO BE A SUPPLIER NOR HAVE I APPLIED TO BE ONE
it would be sad to get banned because I was mistaken as someone else....
to all if you have questions PM me. that is all.

 

[sinnyc]

Well that is good news then... Waiting for my Z-ATTY and am a febbie owner...

Wedding day here. Our son is giving us a new daughter-in-law today Friday was the rehearsal and dinner (set me back quit a bit, hence I refrained from any Ti mods), yesterday we went and unloaded a Glock, Ruger P89, some .45ACPs and my wife even shot her .38 some... then drank a lot of beer and cooked out in the garage because of the rain. So today we have an evening wedding and reception, in the rain!!!

Congratulations! Rain or shine, it'll be a great day.

- Tim

 

[NandyDC]

The Mini 0059 is here with me. So far I have to say Im really impressed, this is a top notch pv. Very very well made, really a beauty. As a rebuildable I prefer to make the coil for myself but this one come preassemble so I give the try and it works like a charm, now Im afraid of when the time comes I cant manage to do the same .

The draw is just perfect. The vapor production is great, the flavor is poor but I think it will show up after the breakin time. I cant chain vape like I do with the Ody or the iAtty without tilting the Mini but is just matter of getting use with tilt from time to time..

After reading people complaining about how hard the button is I have to say that to me is soft and Im not close to be a Hulk , at least it doesnt fire in standing position..

On the downside the misfire ratio is too high, I just cant understand why because everything looks good with the setup. No lock button, no pocket friendly so I only can use it when home.

One full tank is gone in less than an hour..

Now Im sure that I need a Standard and the Z-Atty-G!!!

Thanks Mike!!!

 

[stealfdawg]

After reading people complaining about how hard the button is I have to say that to me is soft and Im not close to be a Hulk , at least it doesnt fire in standing position..

On the downside the misfire ratio is too high, I just cant understand why because everything looks good with the setup. No lock button, no pocket friendly so I only can use it when home.

One full tank is gone in less than an hour..

Now Im sure that I need a Standard and the Z-Atty-G!!!

Thanks Mike!!!

WRONG! unscrew one full turn( button section) it will not fire....this is how it goes in my holster...change your magnet setup to medium detent you will love it....

 

[newq]

Goodness I am so envious of all of you with your cool Zen's I thought i had something when I first Bought my buzz pro now I feel like somehow less of a enthusiast....... I am chomping at the bit on this one. I am stalking zen's site like a mad man, I am suprised he hasn't called out a restraining order on me yet!

Refresh, refresh, refresh! Lemme check, still signed up for notifiers? Yep but what if my email gets delayed.... bettr check again,Nope , not yet.. wait lemme check, nope not yet.... How bout now, nope not yet.... , I know I am gonna be the poor sap who is taking a bathroom break and they hit the net and I come out just to see it is out of stock again....

 

[NandyDC]

WRONG! unscrew one full turn( button section) it will not fire....this is how it goes in my holster...change your magnet setup to medium detent you will love it....

Thanks Stealfdawg but I dont like the idea to unscrew the button to carry on my pocket, I dont think the button is the problem with the pocket but the top cap and the glass tank. I always carry my pvs on my pockets with other stuffs in there and I cant imagine what can happens to the Mini in just one of my normal week day.

I like the default setup of the button, no change needed.

 

[stealfdawg]

Your welcome..hay que sacar todas las otras mierdas de la bolsa compai !!!
yes the cap and tank can be a problem in that situation!

Thanks Stealfdawg but I dont like the idea to unscrew the button to carry on my pocket, I dont think the button is the problem with the pocket but the top cap and the glass tank. I always carry my pvs on my pockets with other stuffs in there and I cant imagine what can happens to the Mini in just one of my normal week day.

I like the default setup of the button, no change needed.