House of Hybrids featuring the Zenesis PV

Status
Not open for further replies.

vicsan

Sparky
ECF Veteran
Verified Member
Apr 15, 2011
3,976
4,831
IL
So... What do you do in your spare time?


From ZEN Alert...

Update 6/1/12

TI Standard Status...
All shipped except 1... working on that issue now.

Z-Atty Update
All parts are machined and delivered...
Z-atty Pro and Z-atty-U are undergoing a center pin upgrade, parts will be in by 6/9/2012 and shipment to people on the lists will be swift.
Z atty G the first list will ship late next week.

AYS...
Going Going GONE... they are shipped!

BAM Update...
These will ship earlier than expected... stay tuned for updates

Cobalt Update...
Already in Production... Announcement coming soon

Pink Pchela Update...
Already in Production... Announcement coming soon

Sidewinder Update...
In CAD... waiting on quotes...

Dragon Update...
Still being engineered...

Diamond Edition Update...
Still on deck for early December Delivery... no list... this will be a lottery

Zenjector Update...
Waiting on Machine shop Queue... production expected to start mid June

Nice!

nevermind...there's a switch update in zen~ alerts too.
 
Last edited:

*ASH*

لــــونــــــا
ECF Veteran
Verified Member
Mar 28, 2012
1,765
4,101
Germany
So... What do you do in your spare time?


From ZEN Alert...

Update 6/1/12

TI Standard Status...
All shipped except 1... working on that issue now.

Z-Atty Update
All parts are machined and delivered...
Z-atty Pro and Z-atty-U are undergoing a center pin upgrade, parts will be in by 6/9/2012 and shipment to people on the lists will be swift.
Z atty G the first list will ship late next week.

AYS...
Going Going GONE... they are shipped!

BAM Update...
These will ship earlier than expected... stay tuned for updates

Cobalt Update...
Already in Production... Announcement coming soon

Pink Pchela Update...
Already in Production... Announcement coming soon

Sidewinder Update...
In CAD... waiting on quotes...

Dragon Update...
Still being engineered...

Diamond Edition Update...
Still on deck for early December Delivery... no list... this will be a lottery

Zenjector Update...
Waiting on Machine shop Queue... production expected to start mid June

I've saw every thing update , But WHERE IS ASH update ?? -_- :(
 

MissEmma

Vaping Master
ECF Veteran
Verified Member
Mar 16, 2012
4,250
9,135
West Virginia
You aren't too far from here. You guys getting the wild weather there too?

It's been raining hard off and on...pretty windy too. I haven't seen any flood warnings yet. I always watch for that because my Mother lives in a flood plane. At least the heat and humidity have gone away. I hate the heat :(
 

Burnside

Senior Member
ECF Veteran
Verified Member
Dec 1, 2011
246
337
Western Massachusetts
Burnside do you have the wick in that zen sent you is'nt it a 400x400 wick and bobba's bounty is 100% vg i thought it would be to thick to use that juice with that wick and we were suppose to use the 325x 325 wicks for anythink over 30%vg

I'm not sure if it is the 400X400 or 325X325 wick. I have read that the 100% VG Boba's or Gorilla Juice would probably wick better with 325X325 wick, so maybe that is my problem. The only good hits I'm getting are when I directly drip onto the wick, and then it only lasts for about two hits. Even when I tilt it almost upside down while taking a drag, I still get burnt and metallic tasting hits. I noticed the very bottom coil does not glow or light up evenly with the other coils as well when doing a dry burn.

So do you think I should change wicks to the 325X325 wick for my Boba's Bounty? I also read that people are getting good results with the 100% VG Gorilla Juice using the 400x400 wick because the GJ is not as thick as the Bobba's.

Maybe I should just swap out the Boba's Bounty for my Gorilla juice instead of adding a whole new wick.
 

Trench

Super Member
ECF Veteran
Verified Member
Jan 30, 2012
563
642
51
Phoenix, AZ
I'm not sure if it is the 400X400 or 325X325 wick. I have read that the 100% VG Boba's or Gorilla Juice would probably wick better with 325X325 wick, so maybe that is my problem. The only good hits I'm getting are when I directly drip onto the wick, and then it only lasts for about two hits. Even when I tilt it almost upside down while taking a drag, I still get burnt and metallic tasting hits. I noticed the very bottom coil does not glow or light up evenly with the other coils as well when doing a dry burn.

So do you think I should change wicks to the 325X325 wick for my Boba's Bounty? I also read that people are getting good results with the 100% VG Gorilla Juice using the 400x400 wick because the GJ is not as thick as the Bobba's.

Maybe I should just swap out the Boba's Bounty for my Gorilla juice instead of adding a whole new wick.

The 325 mesh definitely works a lot better with Boba's. But even then, for me, the wick gets so gunked up after one tank that I have to dry burn and rinse to keep it going.

When it's going, it really goes though! I can almost chain vape a whole tank in 10 minutes. Enough to give myself indigestion. :D LOL

Oddly, I don't have any problems with Gorilla Juice with either the 325 or 400 wick.

For what's it's worth, DO NOT change your setup until you need to. The stock setup is PERFECT and, without experience (which you'll get in soon time), you will not match it and in turn get frustrated. Not that I know from experience or anything. :p

Switch to a thinner juice and "Just Vape It"!
 

sl_rat

Ultra Member
ECF Veteran
Sep 14, 2009
2,703
4,278
Western, NY
Both them juices are very thick i would swap out the wick i mostly vape 100% pg and i think im going to have to do this when my mini zen arrives :)
many folks vape 30% VG on the 400 mesh (like myself). some folks go even higher. if you venture into predominantly VG niquid... switch to the 325... it comes with 400 installed
 

Landlord

Vaping Master
ECF Veteran
Verified Member
Jan 30, 2011
6,357
5,040
44
Cleveland Ohio
More pics of Ti.. Added some Dead Bears from Vape-a-licious and she's pumping like she should be! Love the satin feel to it!
 

Attachments

  • 2012-06-01 19.31.10.jpg
    2012-06-01 19.31.10.jpg
    20.4 KB · Views: 150
  • 2012-06-01 19.34.22.jpg
    2012-06-01 19.34.22.jpg
    21.2 KB · Views: 179

Karla Lyle

Ultra Member
ECF Veteran
Verified Member
Dec 27, 2011
1,952
2,913
47
Frederick, md
ASH is nothing if not persistent. :p
Can you blame him? You know what it is like to want a Zen real bad, and have no idea when it is coming. It is torturous. :laugh: Trust me. Just waiting to find out if I am getting one has been torture. Only thing worse than waiting to find out, would be finding out that I'm not. :ohmy:
 
Status
Not open for further replies.

Users who are viewing this thread