House of Hybrids featuring the Zenesis PV

[grruss]

Anyone try plugging up the fill hole? Or is that not a good idea?

It's fine until you want to vape again. You need the air flow to prevent a pressure differential inside the tank.

 

[Ryd1ZZ]

OK, more questions... lol

The top 2 coils seem to be getting a little bit of build up, but the other ones look almost new. Is something not working properly, or is this normal behavior?

I don't think it's quite time, but, what is the best way to clean the coil? I've seen posts about dry burns. Anyone have step by step instructions, or a link to info that has been posted already about cleaning the coils?

 

[Ryd1ZZ]

BTW I can't put this thing down! Poor GGTS and Ody are being neglected lol

 

[Bamrz]

OK, more questions... lol

The top 2 coils seem to be getting a little bit of build up, but the other ones look almost new. Is something not working properly, or is this normal behavior?

I don't think it's quite time, but, what is the best way to clean the coil? I've seen posts about dry burns. Anyone have step by step instructions, or a link to info that has been posted already about cleaning the coils?

Syringe out the juice in the tank. Pulse the switch until all the coils are glowing. Quench with distilled water, repeat a couple times. Refill and just vape it!

 

[cryptodogg]

OK, more questions... lol

The top 2 coils seem to be getting a little bit of build up, but the other ones look almost new. Is something not working properly, or is this normal behavior?

I don't think it's quite time, but, what is the best way to clean the coil? I've seen posts about dry burns. Anyone have step by step instructions, or a link to info that has been posted already about cleaning the coils?

The top two may be a little looser than the rest but it's just gunking up and gunk is good as it prevents shorts and hot spots.

Some clean some don't. I dry burn before refilling an empty tank or changing juice. Just hold the APV vertical and pulse till all coils glow evenly. Some clean by dry burning on an empty tank and then after glowing hot hitting the coils with water, I prefer distilled water so no crud residue from the water will stay in the mesh. (ever boil tap water dry in a pot, ever notice the white crap that stays in the pot?)

 

[the ob]

Look what showed up today.

Tanks and I now have my first of many z-attys in my possession

 

[grruss]

OK, more questions... lol

The top 2 coils seem to be getting a little bit of build up, but the other ones look almost new. Is something not working properly, or is this normal behavior?

I don't think it's quite time, but, what is the best way to clean the coil? I've seen posts about dry burns. Anyone have step by step instructions, or a link to info that has been posted already about cleaning the coils?

This is what I do... With an empty tank, holding the PV upright, with a less than fully charged battery, I hold the swirch closed until the coils are glowing red, and the thing has stopped popping and sizzling. Then while holding the switch down, I run just a few drops of water over the wick/coil. Then I lightly dry with a paper towel,and dry burn further to dry the water out of the wick. Then prime the wick, splooge, and vape on, brutha.

 

[grruss]

Look what showed up today.

Tanks and I now have my first of many z-attys in my possession

Schaweeeet!

 

[UnFettered_Soul]

Look what showed up today.

Tanks and I now have my first of many z-attys in my possession

I got my tanks in today as well.
Just been too lazy to swap them out.

 

[Ryd1ZZ]

Syringe out the juice in the tank. Pulse the switch until all the coils are glowing. Quench with distilled water, repeat a couple times. Refill and just vape it!

The top two may be a little looser than the rest but it's just gunking up and gunk is good as it prevents shorts and hot spots.

Some clean some don't. I dry burn before refilling an empty tank or changing juice. Just hold the APV vertical and pulse till all coils glow evenly. Some clean by dry burning on an empty tank and then after glowing hot hitting the coils with water, I prefer distilled water so no crud residue from the water will stay in the mesh. (ever boil tap water dry in a pot, ever notice the white crap that stays in the pot?)

This is what I do... With an empty tank, holding the PV upright, with a less than fully charged battery, I hold the swirch closed until the coils are glowing red, and the thing has stopped popping and sizzling. Then while holding the switch down, I run just a few drops of water over the wick/coil. Then I lightly dry with a paper towel,and dry burn further to dry the water out of the wick. Then prime the wick, splooge, and vape on, brutha.

Sounds easy enough. Thanks guys!

 

[Ryd1ZZ]

Very nice ob!

You still want those wires, or did you find some?

 

[cryptodogg]

Look what showed up today.

Tanks and I now have my first of many z-attys in my possession

So jealous of you ob, my Caravela keeps looking at me with such disgust, I need to locate a ZAU before my Caravela comes after me while I sleep.

Congratz on your first of 20 ob.

 

[sl_rat]

Ok, what am I missin on the ripple post?

Ripple often puts the words "marker post" at the place that he read up to. i told him that i liked that idea so much, i was going to start doing that and calling it a "Ripple post".

i guess it caught on.....

 

[tybin]

if you look in sl rat's signature, you will find a link to the faq. that is part of the zenfidel social group. there is a section over there for tips and for cleaning

OK, more questions... lol

The top 2 coils seem to be getting a little bit of build up, but the other ones look almost new. Is something not working properly, or is this normal behavior?

I don't think it's quite time, but, what is the best way to clean the coil? I've seen posts about dry burns. Anyone have step by step instructions, or a link to info that has been posted already about cleaning the coils?

 

[dearme]

I think my SS tanks are in the mailbox. I didn't check the mail today. I got a SS tank for all my Zens, but only for in case I went somewhere hazardous.....LOL......I prefer the quartz tanks.

 

[Ryd1ZZ]

if you look in sl rat's signature, you will find a link to the faq. that is part of the zenfidel social group. there is a section over there for tips and for cleaning

I joined the zenfidel group the first day I got mine lol

Poked around in there a bit but didn't see anything about cleaning. Just checked again and realized there are multiple pages need to dig around some more.

 

[grruss]

Here's another helpful thread.

http://www.e-cigarette-forum.com/fo...ips-tricks-zenesis-other-genesis-devices.html

Hope it's okay to post... Let me know if not, Zen~ and I'll take it down.

 

[JENerationX]

Hey there Jen.

After all the hype over KBV Rootbeer, I ordered a bottle. I usually let new juice sit for a week or so just to make sure I taste it as the maker intended but you guys have me wanting to fill and vape right away.

Must resist.....

I vape all my KBV stuff right out of the package. I try to wait... but I just can't do it.


Fox5 ((((((((((HUGS))))))))))

 

[K-man]

K-man, let me know what your plans are for the weekend. I would like to be able to meet up with you guys for lunch or dinner and maybe out to a club or pub???? I do not drink, so I can be the designated driver if you guys end up having a few too many!!!

I'll PM you my phone number. You can text me and we'll figure it out when I'm there. I'll be there 3pm your time tomorrow

 

[tybin]

so, old timers. what other tips would you suggest if the switch is very clean, the wick is pinched and the other screws are clean but you don't get consistent vapor?