Bill from D and B Gold is throwing in 10 straws with each new Echo and probably will do the same with Go-gos. I think he is still selling Go-gos. http://www.e-cigarette-forum.com/fo...old-has-echo-e-cartomizers-7.html#post3514317
- Status
So, do any of you brave souls want to take a hit for the Go-go team?
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/200782-cartomizerfillinator.html#post3531580
Would this method work for filling a new Go-go cart?
I'm not sure that it would work with a center tube or perhaps it'd pull the coil out of place (or whatever the gismo is called that apparently will come loose easily).
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/200782-cartomizerfillinator.html#post3531580
Would this method work for filling a new Go-go cart?
I'm not sure that it would work with a center tube or perhaps it'd pull the coil out of place (or whatever the gismo is called that apparently will come loose easily).
So, do any of you brave souls want to take a hit for the Go-go team?
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/200782-cartomizerfillinator.html#post3531580
Would this method work for filling a new Go-go cart?
I'm not sure that it would work with a center tube or perhaps it'd pull the coil out of place (or whatever the gismo is called that apparently will come loose easily).
I believe this would work, these carto's are built like the smaller 808 bottom coil cartos. I dont have any good glue to make the fillinator, but as soon as I can get some glue, or a medicine bottle adapter for the syringe, I will give it a go-go...
I believe this would work, these carto's are built like the smaller 808 bottom coil cartos. I dont have any good glue to make the fillinator, but as soon as I can get some glue, or a medicine bottle adapter for the syringe, I will give it a go-go...
Ugh. That "fillinator" is more trouble than it's worth. Glue and ejuice? No thanks.
Look a few posts back at my post on the "q-tip" filling method. Easiest best way to fill ever.
I'm looking for a faster way to fill a new cart so as soon as I can get the right syringe I might try the Cartomizerfillinator. A little less force might be in order though.
I don't think the tiny bit of glue will be an issue once it's dried well.
Edit: Sure won't work with my little 3ML syringe. The Go-go's big rubber cap is way too big to get a good seal.
I don't think the tiny bit of glue will be an issue once it's dried well.
Edit: Sure won't work with my little 3ML syringe. The Go-go's big rubber cap is way too big to get a good seal.
Last edited:
Hey there, folks - I'm the Cartomizerfillinator guy.
Seems some other folks with Go-Go's are wondering if this method would work for Go-Go cartos, but I don't have any Go-Go gear to work with. All I think I'd really need is a Go-Go cartomizer or two to see if any of the various syringe sizes I have will work.
So... Is there any chance one of you might have a dead Go-Go cartomizer or two (with maybe 6 or 8 spare end caps) that you wouldn't mind mailing to me for the cause? If so, please PM me and we'll hash out the details.
If I can make it work, you'll be the first to receive your very own custom-made Cartomizerfillinator A-Go-Go.
Thanks!
Seems some other folks with Go-Go's are wondering if this method would work for Go-Go cartos, but I don't have any Go-Go gear to work with. All I think I'd really need is a Go-Go cartomizer or two to see if any of the various syringe sizes I have will work.
So... Is there any chance one of you might have a dead Go-Go cartomizer or two (with maybe 6 or 8 spare end caps) that you wouldn't mind mailing to me for the cause? If so, please PM me and we'll hash out the details.
If I can make it work, you'll be the first to receive your very own custom-made Cartomizerfillinator A-Go-Go.
Thanks!
Last edited:
Vapian,
I received my 6ML syringe order today and I think they might work. (Need to find my sharp blades and glue now.) Anyway, if I fail I'll send you something to work with. It'll probably take a few days for me to get time to try it.
I received my 6ML syringe order today and I think they might work. (Need to find my sharp blades and glue now.) Anyway, if I fail I'll send you something to work with. It'll probably take a few days for me to get time to try it.
Vapian,
My syringe order came in today and I think the 6ML size might work. Now I need to find my sharp blade and glue. If I fail, I'll send you something to work with. It will probably take me a few days to get time to try it out though.
Sorry about the duplicate post!
While I'm 'editing' ... NO fireworks tonight in the neighborhood! I gotta get some sleep.
My syringe order came in today and I think the 6ML size might work. Now I need to find my sharp blade and glue. If I fail, I'll send you something to work with. It will probably take me a few days to get time to try it out though.
Sorry about the duplicate post!
While I'm 'editing' ... NO fireworks tonight in the neighborhood! I gotta get some sleep.
Last edited:
I have igo. Do u think this will work. I have a dead one (will not fire). Would you be willing to test with them also?
Hey there, folks - I'm the Cartomizerfillinator guy.
Seems some other folks with Go-Go's are wondering if this method would work for Go-Go cartos, but I don't have any Go-Go gear to work with. All I think I'd really need is a Go-Go cartomizer or two to see if any of the various syringe sizes I have will work.
So... Is there any chance one of you might have a dead Go-Go cartomizer or two (with maybe 6 or 8 spare end caps) that you wouldn't mind mailing to me for the cause? If so, please PM me and we'll hash out the details.
If I can make it work, you'll be the first to receive your very own custom-made Cartomizerfillinator A-Go-Go.
Thanks!
I'm willing to test just about anything as long as I have the gear in hand. Since I have neither iGo or Go-Go at the moment that would be difficult, though.
Someone in the other thread has volunteered to send a couple of dead Go-Go cartos and end caps but not sure when they will be sent. With that I should at least be able to determine whether the carto and some size of syringe would be able to be mated for filling/flushing. After that, someone else will have to determine "Does it vape?"
I'm willing to test just about anything as long as I have the gear in hand. Since I have neither iGo or Go-Go at the moment that would be difficult, though.
Someone in the other thread has volunteered to send a couple of dead Go-Go cartos and end caps but not sure when they will be sent. With that I should at least be able to determine whether the carto and some size of syringe would be able to be mated for filling/flushing. After that, someone else will have to determine "Does it Vape?"
If you'd like an Echo-e to try (works on eGo and Riva batteries), I will send you one, just PM me your address. It's not dead, but it could benefit from this cleaning method (I am too lazy).
Let me take a look around - I had some Echo-E cartos at some point but four out of my five were duds so I gave up on them. Might have kept one around... As I recall they are roughly eGo Type-A shaped conical cartos, little smaller opening at the top. Potentially tricky shape. Since I'm still doing discovery and refining both the Cartomizer- and Bottle-Fillinator ideas, I'll hold off on digging into the Echo-E and eGo Mega Cartos for now, but will try to get back to them later.
As for the Go-Go, I did receive a carto and did a preliminary test that worked, but the tricky part is that the end caps aren't very long and aren't as snug as I'd like. Also haven't found a local tubing source that I like for this. A sample of some tubing should come in this week that I'm hoping will work with a little modification to the build procedure. Will definitely post results in the other thread, and/or here if you guys are interested and don't mind.
Thanks for sending along the Echo-E carto! I've been able to test-fit a couple of ideas today -- one of them involving a rubber tube and flange fitting from a defunct "sippy-cup" of all things -- and hope to be able to actually do a test clean soon. When I do I'll do a mini-update video over in the Cartomizerfillinator thread and if I can turn into something that seems reliable, send one to you for field-testing and feedback.
Thanks again!
Thanks for sending along the Echo-E carto! I've been able to test-fit a couple of ideas today -- one of them involving a rubber tube and flange fitting from a defunct "sippy-cup" of all things -- and hope to be able to actually do a test clean soon. When I do I'll do a mini-update video over in the Cartomizerfillinator thread and if I can turn into something that seems reliable, send one to you for field-testing and feedback.
Thanks again!
That's great Vapian! I love that we have so many creative people here like you trying to make things easier for people.
Thanks for sending along the Echo-E carto! I've been able to test-fit a couple of ideas today -- one of them involving a rubber tube and flange fitting from a defunct "sippy-cup" of all things -- and hope to be able to actually do a test clean soon. When I do I'll do a mini-update video over in the Cartomizerfillinator thread and if I can turn into something that seems reliable, send one to you for field-testing and feedback.
Thanks again!
Is it something like this one? Carto/Atty Cleaner Kit - Control Syringe, Luer-lock,10ml - Cartomizer Cleaner / Filler w/cleaning tube
Actually, in the case of the Echo-E, it's a lot like that one.
Or at least, one of the methods I'll be considering.
Actually, in the case of the Echo-E, it's a lot like that one.
It sounds like a good method I'm anxious to try it.
For those who may be interested, here's a video with the solution I've kind of settled on for the Echo-E Cartomizer, at least for cleaning... and it should work well for the Go-Go cartomizer for both cleaning and filling. NicLiq, I hope to have your "kit" out to you sometime this week, looking forward to getting some real-world feedback on this!
- Status
Similar threads
- Locked
