And be prepared to buy a new vacuum every year!! LOLOL
Huge Giveaway! Innokin launch their DISRUPTER Device on ECF - 400 To Win
- Thread starter Oliver
- Start date
- th_trl_thread_readers 0
- Status
And be prepared to buy a new vacuum every year!! LOLOL
Thanks everyone! That's Emma! She's finicky but I love her all the same. She stays at home so that I don't mess her up 
OFC not but Auburn suits me better.
Ya' might as well be upfront and honest . . . ANY WOMAN . . . would do . . .
(Well - That's assuming "You're" heterosexual and more importantly, if they would have Ya' that is . . .
)
I cannot own a Redhead!
Well - That's not what "You" said before . . .
OKAY - "My" BAD
- Really NEED to get back to discussing "Innokin" and their products, especially the "InnokinDisrupter" & "InnokinCell" . . . 
Last edited:
Well I received my iSub G tank, using 30/70 and tried it on my SVD 2.0 @ 20w...no go, will not work. So I put it on my Aspire CF Sub and BINGO, so there must be something in the battery of the SVD that does not fire it, perhaps the amperage, this one has an Efest purple 20A...Other than that perhaps it is the connection but it does read the resistance right on the money @ 0.5ohms so this suggests the connection is fine.
The iSub coil is said to use 20 to 35W, but it sure does not work @ 20W.
Excellent vapor, marginally better than the Atlantis but the flavor is the same. I do have to slipstream the Atlantis more it seems just to kill the heat, the iSub G is marginally cooler so this works better for me. Also getting a couple snaps but no spit back.
The tank itself is well rounded with no sharp edges, good glass thickness. I really like the ease of removing and installing the coil, in and out, no threading! It will be time to see how the seals all work, but solid tank nevertheless. Tight fit for the AFC so no ball and spring notch needed to secure it in place. NICE but I can see it is a "gas guzzler"!
Now I just need to see how it works on the Disrupter.
The iSub coil is said to use 20 to 35W, but it sure does not work @ 20W.
Excellent vapor, marginally better than the Atlantis but the flavor is the same. I do have to slipstream the Atlantis more it seems just to kill the heat, the iSub G is marginally cooler so this works better for me. Also getting a couple snaps but no spit back.
The tank itself is well rounded with no sharp edges, good glass thickness. I really like the ease of removing and installing the coil, in and out, no threading! It will be time to see how the seals all work, but solid tank nevertheless. Tight fit for the AFC so no ball and spring notch needed to secure it in place. NICE but I can see it is a "gas guzzler"!
Now I just need to see how it works on the Disrupter.
Huskies head for Canada. Quickly....faster than a car.
This is soo true! My neighbor has a husky and he had literally jumped threw his second floor screened window twice. He's fine, they just can't put windows up anymore.
As an end user of Innokin products, they sell themselves. Dependable and reliable.
2 VTRs
2 MVPs
1 Cool Fire
All the colors of the Iclear 30b
2 iclear 30s.
I think that should be their focus.
The Disruptor and the Innokincell is the next evolution.
2 VTRs
2 MVPs
1 Cool Fire
All the colors of the Iclear 30b
2 iclear 30s.
I think that should be their focus.
The Disruptor and the Innokincell is the next evolution.
Be careful with Efest batteries I don't want to get anyone upset or start a argument.
Efest re-wraps other companies batteries which is no big deal, But Efest exaggerates the battery specs.
What I mean by exaggerates, the purple Efest are not a 20A but are a rewrapped Panasonic NCR18650BE that are only rated for 4A max continuous, 6.5A max pulse
I personally wouldn't use a Efest battery, especially for sub-ohm vaping.
This is the company that first did testing on them, I right click and use Google Translate.
Efest Purple IMR 18650-3100 "20A" Akkutest in der Dampfakkus.de AkkuDB
For Google Translate another site click here
I don't want to get anyone upset or start a argument.Efest re-wraps other companies batteries which is no big deal, But Efest exaggerates the battery specs.
What I mean by exaggerates, the purple Efest are not a 20A but are a rewrapped Panasonic NCR18650BE that are only rated for 4A max continuous, 6.5A max pulse
I personally wouldn't use a Efest battery, especially for sub-ohm vaping.
This is the company that first did testing on them, I right click and use Google Translate.
Efest Purple IMR 18650-3100 "20A" Akkutest in der Dampfakkus.de AkkuDB
For Google Translate another site click here
My dad came today to pick up that CF IV I ordered for his friend.
I almost wanted to tell him it got lost in the mail and keep it
But the lady did give him an extra $20 to give me for ordering it for her
I almost wanted to tell him it got lost in the mail and keep it
But the lady did give him an extra $20 to give me for ordering it for her
Panorama, the SVD 2.0 is supposed to fire .5 ohm coils. That's the lowest resistance they fire. Maybe the coil is actually a smidge lower, like .48 ohms, in which case it wouldn't fire but the screen would still show .5. It shouldn't be a connector problem or you wouldn't get an ohms reading.
That was very nice of her! Now you are almost halfway to getting your own Coolfire!!My dad came today to pick up that CF IV I ordered for his friend.
I almost wanted to tell him it got lost in the mail and keep it
But the lady did give him an extra $20 to give me for ordering it for her
I have gotten 5 packs of coils that were around .497 ohms and they wouldn't fire
All Coils have that +/- of what they were designed to be.
That's why it's nice to see mods go down to .3 or .2 ohms, I like my .5 ohm and will stay with them but, I don't have to worry about them .49 ohm coils not firing
All Coils have that +/- of what they were designed to be.
That's why it's nice to see mods go down to .3 or .2 ohms, I like my .5 ohm and will stay with them but, I don't have to worry about them .49 ohm coils not firing
Last edited:
Oh I got oneThat was very nice of her! Now you are almost halfway to getting your own Coolfire!!
but two would be better
NP...I actually have no intent of using the sub ohm with it, I just decided to try it on the SVD I am using whist sitting here. It works fine for the SVD. I have several in rotation all AW IMR except this Efest. Thnx!Be careful with Efest batteries
Efest re-wraps other companies batteries which is no big deal, But Efest exaggerates the battery specs.
What I mean by exaggerates, the purple Efest are not a 20A but are a rewrapped Panasonic NCR18650BE that are only rated for 4A max continuous, 6.5A max pulse
I personally wouldn't use a Efest battery, especially for sub-ohm vaping.
This is the company that first did testing on them, I right click and use Google Translate.
Efest Purple IMR 18650-3100 "20A" Akkutest in der Dampfakkus.de AkkuDB
For Google Translate another site click here
Ah yes...Well put, never thought about the accuracy regardless of the readout.
I am sure that was the issue.
It wasn't just you I seen a few people use themNP...I actually have no intent of using the sub ohm with it, I just decided to try it on the SVD I am using whist sitting here. It works fine for the SVD. I have several in rotation all AW IMR except this Efest. Thnx!
I just don't trust a company that would do that
I have a small utility shed wired for electric and that is where my batteries get charged, I use a bag also, but I have the shed which costs far less than does the house in case of fire!
That's one of my biggest concerns is a house fire startedI have a small utility shed wired for electric and that is where my batteries get charged, I use a bag also, but I have the shed which costs far less than does the house in case of fire!
If you haven't notice by now batteries are one of my pet peeves I seen two batteries vent before, and I don't want that to happen to me
- Status
Similar threads
- Locked
- Locked
