HV (High-Voltage) 510 Premium Cartomizers Beta Testing in progress

[atavanhalen]

That is badass 5card!

 

[thelook]

Sorry it took so long to get back, had quite a few crazy days.

I do not really know what to say, it has been covered so well by others already, so I will just finish up MY feelings and findings.

I have used the test cartos for over a week now.
Silver carto: Never had any luck vaping this one on anything other than the 3.7 Anything over that and it tasted burned.

Black Carto: had better luck with this one, it worked well UP to 5V but worked better a little under, no burn taste at this voltage.

Problem I had with both was topping off, I had to top off often and when I did they would only accept about 10 drops of juices before they flooded, which means that there was more than a half of carto of juice that is not being used.

I would love to see the 510's in the design of the other test cartos that we did a few weeks ago (XL 808's) I think those are amazing and headed in the right direction.

Ike, You are doing a wonderful job trying to find us the perfect vape, PLEASE never give up, your brilliance shows through on the 808's you designed!!
Thank you for allowing me to test these for you and I look forward to the next test!

 

[5cardstud]

Thank you atavanhalen . I really love vaping with it. It works very well.

 

[AngusATAT]

Just a quick first impression....

Not really digging these at 5v. It vapes really hot, more so than anyother atty or carto I've used at 5v. I'm not really a fan of hot vaping.

At 3.7v it works well. I can't say that it is better than any other carto I've had at 3.7v, though.

I agree with thelook, if these were constructed the same way the 808XL cartos are, they'd be perfect.

 

[thelook]

AngusATAT

I agree with thelook



This will be my NEW signature

 

[Iken]

Here is a pic of it Ikenvape. I posted it in the modders forum too. It gives me unloaded volts and loaded volts and amps.

[/IMG]

Great review and pics switched.

WOW! That is Impressive! What a beautiful device you got there! I bet that one is the talk of the town in Modder's valley! Really, it's just incredible.



Thank you so much guys! Your input is greatly valued, not too mention beautifully written! Thank You! So many grand write-ups! So bottom line is, we failed the HV run but produced a solid 3.4-4.5V device, which is still top performer. This was aimed at matching the innards of the Mega 808, but it seems the manufacture dropped the ball on this set. So we'll up the internal resistances, lengthen the wick, and reinforce the environment.

 

[atavanhalen]

WOW! That is Impressive! What a beautiful device you got there! I bet that one is the talk of the town in Modder's valley! Really, it's just incredible.



Thank you so much guys! Your input is greatly valued, not too mention beautifully written! Thank You! So many grand write-

ups! So bottom line is, we failed the HV run but produced a solid 3.4-4.5V device, which is still top performer. This was aimed at matching the innards of the Mega 808, but it seems the manufacture dropped the ball on this set. So we'll up the internal resistances, lengthen the wick, and reinforce the environment.

I am really glad to hear you will give it another try. I guess that probably goes without saying seeing as you never give up on finding the best for all voltages. Until then, I will just use the couple I have for 4 to 5 volts.

 

[5cardstud]

WOW! That is Impressive! What a beautiful device you got there! I bet that one is the talk of the town in Modder's valley! Really, it's just incredible.



Thank you so much guys! Your input is greatly valued, not too mention beautifully written! Thank You! So many grand write-ups! So bottom line is, we failed the HV run but produced a solid 3.4-4.5V device, which is still top performer. This was aimed at matching the innards of the Mega 808, but it seems the manufacture dropped the ball on this set. So we'll up the internal resistances, lengthen the wick, and reinforce the environment.

I Know you will succeed and can't wait. I'm a cartomizer connoisseur, they're all I use and I also prefer higher voltages. I'll be waiting for this one.

Thanks for the compliments too Isaac.

 

[Iken]

I am really glad to hear you will give it another try. I guess that probably goes without saying seeing as you never give up on finding the best for all voltages. Until then, I will just use the couple I have for 4 to 5 volts.

I Know you will succeed and can't wait. I'm a cartomizer connoisseur, they're all I use and I also prefer higher voltages. I'll be waiting for this one.

Thanks for the compliments too Isaac.

Thanks alot fellas. About an hour ago , I was on a video conference with the engineer about it and he's going to attempt it today. It's the size that is the difficult part. We may have to make them as big as the Mega. Because of keeping the environment jam packed while safely pumping electricity through is an obstacle. Here's for hoping for success!

 

[mwa102464]

Thanks for keeping us Ikenbeta's posted Issac, we are all gonna look forward to testing out these latest ones you have coming in
I know you will get it right and have the best ones with all this hard work,time and money your spending for us, believe me we all appreciate it a lot, I know I do..!!!

 

[AngusATAT]

It's the size that is the difficult part. We may have to make them as big as the Mega.

Apparently size does matter.

 

[Switched]

Thanks alot fellas. About an hour ago , I was on a video conference with the engineer about it and he's going to attempt it today. It's the size that is the difficult part. We may have to make them as big as the Mega. Because of keeping the environment jam packed while safely pumping electricity through is an obstacle. Here's for hoping for success!

If someone can pull it off, it's you and your team.

 

[thelook]

You can and will do it Ike!
And I am looking forward to it!