I also, kept haunting your site.....

Status
Not open for further replies.

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Well, I just did it!!!! I actually pressed the button, that kept beckoning me to press it. I cant wait, yes I can. Now I just have to order the batteries and charger. I should be set to just put it together and be in Saber Touch heaven soon. I ended up choosing the smooth flat top. I hope Sir Lawrence can do a semi matte to match well with the Black Ice finish. I want it to blend well but not break up the lines. Im excited. thank you all, and Thank You Sir Lawrence, Im sure I will be hearing from you soon!
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Thank you "Tats" so nice of you all to welcome me with open "sabers" and so "touching" pun pun. Im sitting here with my humble little KGO with a nice Phiniac burning away, an picturing the tank with a saber in my hand as I type. Will I feel a big difference when I take a drag? I notice after about 6 hours that the drags get a bit weak. I love the KGO but it seems a bit weak with the top heavy tank.
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Hello Ive been post studying the Saber Touch on you tube and most of the reviews are being done on the 5volt version. Is there any reason to have a 5 volt over 3.7? I know that people who use higher voltages are ones who like a hotter vape and more throat hit. I dont really care for warmer vape or TH. Some one said that if you use it at the 3.7 that its basically a high priced battery or at 6 volt it gets to hot for 510 cartos and you will burn them out? Just thought I would ask you the users for your opinion. Im very happy with 3.7 volts on my KGO, I like the flavor and battery life, but figured Id like something that looked much better and lasted longer.
 

Tat_skull

Vaping Master
ECF Veteran
Verified Member
Dec 20, 2010
4,210
6,535
New Mexico
Hello Ive been post studying the Saber Touch on you tube and most of the reviews are being done on the 5volt version. Is there any reason to have a 5 volt over 3.7? I know that people who use higher voltages are ones who like a hotter vape and more throat hit. I dont really care for warmer vape or TH. Some one said that if you use it at the 3.7 that its basically a high priced battery or at 6 volt it gets to hot for 510 cartos and you will burn them out? Just thought I would ask you the users for your opinion. Im very happy with 3.7 volts on my KGO, I like the flavor and battery life, but figured Id like something that looked much better and lasted longer.
It all boils down to what ohm atty or carto you are using. You can get the same affect from a 3.7 devise as you can from a 5volt(6 volt, WAAAAY to HOT!!!). It's really all just preference. I really like standard resistance Ikenvape801 fusion carto's for my "Stress" joose(vape Placid from KBV) so I use 5volts to push them properly. However, I could use a LR version on a 3.7 device and feel the same effect. So once again, it's all about preference of ohm resistance on atty's or carto's.
 

seanluke

Senior Member
ECF Veteran
Verified Member
Apr 26, 2012
296
338
Hazleton, PA
Hello Ive been post studying the Saber Touch on you tube and most of the reviews are being done on the 5volt version. Is there any reason to have a 5 volt over 3.7? I know that people who use higher voltages are ones who like a hotter vape and more throat hit. I dont really care for warmer vape or TH. Some one said that if you use it at the 3.7 that its basically a high priced battery or at 6 volt it gets to hot for 510 cartos and you will burn them out? Just thought I would ask you the users for your opinion. Im very happy with 3.7 volts on my KGO, I like the flavor and battery life, but figured Id like something that looked much better and lasted longer.

I love my VV at 4.2v with LR boge carto in phiniac tank and run my 3.7v kicked with an 18490 batt or the kick edition with an 18650 with LR cartos and atty's. While I don't run High Voltage, I prefer the consistent voltage the VV produces or "the kick" gives regardless of the charge that's left on your battery. The 3.7v works great too on the LR stuff. i also run my pass thru at 4.2v. With any 3.7v on batteries there is definately a difference between a fresh battery and one you've been using all day or a couple days towards the end of its charge. The VV, the kick, The pass thru (which I use a lot), and the 5v regulated I believe (which I don't have) take the battery charge out of the equation for the saber experience. It's the same from fully charged until there is no charge left. So there is no doubt when I need to change batteries. But my pats mini is 3.7v and I love that little guy! It performs flawlessly! And it's my favorite for sentimental reasons.
I guess it all depends on your mood, your preference, what you're doing, where you're going, and what you want out of your saber at that time. That's why all these options, customizations, and choices are so great! They all work well, and will fit any situation or preference, and we have the happy dilemma of deciding which one to use. And really you can't make a bad decision. Battery life is definately longer with an 18650 without a kick vs. the dual 18350's though if that is a concern for you. It doen't matter to me as I always have spares with me and I use the pass thru whenever I can, but it might be important to you.
I don't know if that helped at all (or made it worse lol), but I love all my sabers, each is unique, and I use each one for different reasons. I believe they are as individual as we are and you need to choose the options that are right for you.
 
Last edited:

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Thank you for the input, seanluke. I was just making sure I made a good choice, Im sure I did, and who knows, this probably wont be my first one. I hope a year from now I will also have a Super-T precise plus. But with this baby, Im sure I wont be in a hurry. I just ordered a pair of awr 18650 batteries and a smart charger. I hope this keeps me vaping on for a while. I also bought some Kanger horizontal cartos, and some boge fusions with an adapter, what else, I want to find some Ikenvape fusions, oh I did get some mini resurrectors. Im having a heck of a time with these boge LR 2.0 cartos, most dont perform well and others so so. I have a couple boxes of the good ones stashed. I hope I can find something to keep me juiced. I also got a vivi nova 2.5 with the short wicks. I think I have enough options to make my saber experience a wonderful one.
Oh before I forget has anyone tried using the CE5 stainless cartomizers that dont have filler in a phiniac tank? Heres the thread http://www.e-cigarette-forum.com/fo...c-pyrex-tanks-unique-rugged-beautiful-10.html.
Sounds like a good idea.
 

AceCC

Super Member
ECF Veteran
Jun 28, 2012
618
691
Back on the Moon
Well, I just did it!!!! I actually pressed the button, that kept beckoning me to press it. I cant wait, yes I can. Now I just have to order the batteries and charger. I should be set to just put it together and be in Saber Touch heaven soon. I ended up choosing the smooth flat top. I hope Sir Lawrence can do a semi matte to match well with the Black Ice finish. I want it to blend well but not break up the lines. Im excited. thank you all, and Thank You Sir Lawrence, Im sure I will be hearing from you soon!

WooHooooo :w00t: Welcome to the home of the Moon Dwellers. It's good to have you aboard :thumbs:
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Its good to be abord. I just purchased a couple of AW IMR 18650 - 2000 mAh High Drain Batteries and a Charger for Li-ion Batteries that has ability to shut off when they are fully charged. I was going to get the Pila charger, but with all the stuff I have to get I decided to get that one from Provape from now. I hope these are the correct ones. Sir Lawrence and I have been going back and forth with final touches on my order and It is officially in production. I guess I was going thru last minute nervousness in making the final choice on end cap colors, but I finally went with my first choice of the black ice finish with black satin finish smooth flat end caps.
 

anavidfan

ECF Guru
ECF Veteran
Verified Member
Jun 14, 2012
10,216
20,329
U.S.
Thank You, I hope it looks as good as it looks in my head. Its kinda hard when you have so many choices. Its as if someone is holding a gun to your head and telling you: "NOW" part of you wants to go ahead and place the order cause the sooner you make you decision the sooner it gets here. Even though I had been making my choices and putting it in the cart so many times when It came to making the final decision, I started to doubt myself. I am not planning on getting another good mod for a long time, I felt it had to be perfect. Ive been "window shopping" on the internet and found some really unique items to go with it. One item I found that would look great on the sabers is this cool atty made in Greece called Steam Machine VST. It is beautiful, and its in the caliber as the GGs and the DIDs and the Zen. It is real slim so it looks great on slim batteries like the KGO , but it also looks awesome on larger MODs . I really love it, but its about 100 bucks with shipping etc. Beautiful all polished stainless steel.
 

AceCC

Super Member
ECF Veteran
Jun 28, 2012
618
691
Back on the Moon
Thank You, I hope it looks as good as it looks in my head. Its kinda hard when you have so many choices. Its as if someone is holding a gun to your head and telling you: "NOW" part of you wants to go ahead and place the order cause the sooner you make you decision the sooner it gets here. Even though I had been making my choices and putting it in the cart so many times when It came to making the final decision, I started to doubt myself. I am not planning on getting another good mod for a long time, I felt it had to be perfect.

I used to get the same nervous feeling when ordering Sabers. By the time you get to your fourth or fifth one that queesiness subsides. :laugh:
 

Tat_skull

Vaping Master
ECF Veteran
Verified Member
Dec 20, 2010
4,210
6,535
New Mexico
For me, first there's that little tickling in the brain anticipating the magic Emal...Your Saber Has Shipped:w00t: Then there's those three days of agonizing torture while it's in transit, I know what I ordered, but really, how is it going to look. What if it gets lost, USPS has not been updated, AGGGHHHH!! Ok, it hit the sorting facility right before my PO. Toss, turn, check the charger(did I already charge batts for it:confused:), check the time(is it 8:30 yet!!!), finally fall asleep, wake up, forget to check Email, race to the po(cant imagine those that wait on a mailman:facepalm:) see a Priority box on the shelf(hey that's my saber in there), get the box and race home(don't open there) Run inside, sit down looking at the box in my hands, then proceed to open it!! Gotta get that bubble wrap off, awe man now the polishing cloth(anticipation Rising Rapidly) Low and Behold, there it is my beautiful Saber...
IT's Everything I EXPECTED AND MORE:w00t:
So now I gotta go share in my excitemet with my fellow Moon Dwellers:blush:

There's my anticipatory pain, So I guess I got bad huh:facepalm:
 
Last edited:

AceCC

Super Member
ECF Veteran
Jun 28, 2012
618
691
Back on the Moon
For me, first there's that little tickling in the brain anticipating the magic Emal...Your Saber Has Shipped:w00t: Then there's those three days of agonizing torture while it's in transit, I know what I ordered, but really, how is it going to look. What if it gets lost, USPS has not been updated, AGGGHHHH!! Ok, it hit the sorting facility right before my PO. Toss, turn, check the charger(did I already charge batts for it:confused:), check the time(is it 8:30 yet!!!), finally fall asleep, wake up, forget to check Email, race to the po(cant imagine those that wait on a mailman:facepalm:) see a Priority box on the shelf(hey that's my saber in there), get the box and race home(don't open there) Run inside, sit down looking at the box in my hands, then proceed to open it!! Gotta get that bubble wrap off, awe man now the polishing cloth(anticipation Rising Rapidly) Low and Behold, there it is my beautiful Saber...
IT's Everything I EXPECTED AND MORE:w00t:
So now I gotta go share in my excitemet with my fellow Moon Dwellers:blush:

There's my anticipatory pain, So I guess I got bad huh:facepalm:

You just described every SINGLE detail of my day today. Wow. Even down to the bubble wrap and polishing cloth.
IT's Everything I EXPECTED AND MORE :w00t:
I know I've got it bad and I've got it good. Doctor, Doctor! Give me the news... :laugh:
 
Status
Not open for further replies.

Users who are viewing this thread