I built my first MOD (nicostik) no solder.

[prateus]

I know it looks pretty Ragged but it works well enough I dissasembled a 10 manual batterry for my next mod IT had been run overf by a car 4 times and still worked well\, and the batt connector was intact so I am using the small
push button on my next mod I don't like the large red square plugs I got although they would be nicer If I had the tools to cut an exact hole in the Box.


I want to get a drill but what would be a good cheap tool to use for cutting the plastic and makingm precise cuts?

 

[warp1900]

I know it looks pretty Ragged but it works well enough I dissasembled a 10 manual batterry for my next mod IT had been run overf by a car 4 times and still worked well\, and the batt connector was intact so I am using the small
push button on my next mod I don't like the large red square plugs I got although they would be nicer If I had the tools to cut an exact hole in the Box.


I want to get a drill but what would be a good cheap tool to use for cutting the plastic and makingm precise cuts?

You can use this with no extra tools (bare hands)
Perfect holes on plastic every time.

- Harbor Freight Tools - Quality Tools at the Lowest Prices

 

[prateus]

Thanks Warp I appreciate all the feedback. I made my second box and used no solder or glue at all. I heated the battery casing to hot then melted a perfect hole through the switch box and then the connector sits there flkush and tight. Got rid of the LED and moved button to the side of the box, it looks way better and feels way better now more user friendl, kinda just squeeze the sides and you got vapor. I love to Vape. haha

I also used an exacxto blade that I heated with a lighter to cut hole for button, Much more precise then serrated Kitchen Knife. LoL

 

[SLDS181]

Wire Glue is expensive - you can mix graphite powder and liquid tape and get the same effect

 

[mnealtx]

Or spend a few cents and get a crimp on wire connector - your choice.

 

[prateus]

So Guys I dissasembled my first ****ty mod and made a new one using a bttery tube heated for the hole and a hoit exactor knif eI also changed the switrch toi the side of the unit becuase of its size and I also didn't go with an LED. I used no glue or anything everything is held in by just being the right size with fits perfectly in attomizer connector. anyways here is the eye candy.

This things puts otu clouds as you can see and Im sure many of you all know. lol Happy Vaping.