I cannot build anything

[USMCotaku]

Wish I had the problem of too many mods
I have a few though. My Hana v3, an itaste vv v3, a nemesis clone, and a panzer clone. I use my kayfun on my Hana, my aerotank mega on my panzer (just finished building a .6 ohm parallel in it ), my nemi is my dripper mod, and my itaste vv v3 is my emergency backup, it's low wattage, but I have an aerotank mini on it so it works well

 

[gel drops]

VTR lethal weapon,I definitely keep that one at home MVP is my up and rush out of the door so to speak,the two regulated mods I don't think I've even take those out yet and I got another one on the way,that will put me at 7 mods...too many!

 

[Keeferes]

I have a vamo v5 for backup, use a Sigelei 20 Watt, a modified VTR, an svd, a FUhatten, and a Stingray X clone. Topper wise I run a few ehpro kfl+ clones, SXK Magma clone, and a Tobeco APO clone. Will soon have a plume veil clone, 454 big block clone, lemo, and a mephisto clone in the rotation also. And hopefully a clt.

 

[gel drops]

I have a vamo v5 for backup, use a Sigelei 20 Watt, a modified VTR, an svd, a FUhatten, and a Stingray X clone. Topper wise I run a few ehpro kfl+ clones, SXK Magma clone, and a Tobeco APO clone. Will soon have a plume veil clone, 454 big block clone, lemo, and a mephisto clone in the rotation also. And hopefully a clt.

That is quite a arsenal you got!

 

[gel drops]

My 6..and number 7 will be here soon my plastic has disappeared.

 

[gel drops]

Dang cell,just got to love it when it goes off at 430 in the morning,got to get up at 730 anyways just going to stay up and do the dew..fresh vtc5 in the Lambo and of course kayfun+ with some 24 mg called sweet Carolina I'm good for the day up and running.

 

[gel drops]

On the kayfun ,I am wondering how often you have to change your coil or wick ? I thank that I am closing in on two weeks and it's still vaping just fine no changes whatsoever is that about the average time frame.

 

[USMCotaku]

That will depend on the juice. Clear juices trend to give a longer life to your wick. I've only used one juice that was an exception to this. It was super sweet, and seemed to gunk up my wick and coil rather quickly. On my kayfun I've noticed that when it's getting time to rewick I start getting some gurgling and a little leaking out of the air hole.

 

[USMCotaku]

The coil can last quite a bit longer, just dry burn it when changing your wick to clean off any gunk. Eventually your resistance will start getting higher and you will need to recoil, but that could be a couple of months

 

[Keeferes]

My Kayfun coils are usually around 3 months. I just dry burn and rewick. I tend to use sweet juices, and change flavors so I rewick about 1 time a week, sometimes two. Now my magma and other drippers get recoiled about every 3 days. I get bored with a build so I just slap another one in there. This was today's magma build. Just your basic .6 ohm, 28awg kanthal, Cvs cotton wick.

 

[gel drops]

Magma I looked at mine yesterday it still had a build on it but it looked nasty I think that will be my project for today,.6 ohm build,sub build I have yet gone into the sub build area have stayed above 1ohm.

 

[jaxgator]

Using rayon, my coils get gunked up and need a dry burn way before needing to change my wicks in my Plume Veil. With OC, it was the other way around. I use a variety of juices throughout the day as well.

 

[gel drops]

When i first started making a build gator I thought the wicking part would be easy,with what little experience that I have I was wrong!

 

[jaxgator]

IMO, wicking is the toughest and most critical part of any build.

I had a lot of issues when I first started wicking with OC. It seemed, no matter how hard I tried, I always used too much. Once I switched to rayon, I got it right the first time.

 

[USMCotaku]

Magma I looked at mine yesterday it still had a build on it but it looked nasty I think that will be my project for today,.6 ohm build,sub build I have yet gone into the sub build area have stayed above 1ohm.

Remember if you are building dual coils, for a .6 ohm build you will actually be building two 1.2 ohm coils

 

[gel drops]

I know now I was not taking into these consideration with 1 coil versus a dual coil build.

 

[gel drops]

IMO, wicking is the toughest and most critical part of any build.

I had a lot of issues when I first started wicking with OC. It seemed, no matter how hard I tried, I always used too much. Once I switched to rayon, I got it right the first time.

I will probably go ahead and get some rayon,it took me about 3 are 4 tries with the kayfun using OC.

 

[Keeferes]

I personally don't care for Rayon. The texture was too odd for me to work with. I will be over in Greenville tomorrow though. If ya want I can shoot you a text when I head that way and give ya some Peaches and Cream cotton yarn for your Kayfun.

 

[gel drops]

Went to Atlanta to catch a few Braves games,glad we did not go to the games they're out of any chance of making it in as a wild card spot,anyways glad to be back home I did figure out that I was not putting enough liquid in my Kayfun,it holds a lot more than I thought it did,I'm getting a full day and part of the next day on just one refill now!

 

[Keeferes]

I've been neglecting my Kayfun's lately. Been building alot of drippers. Magma, APO, and added an Atomic and Plume Veil to the rotation this weekend. Now to save for a higher Watt regulated device. My sigelei 20 Watt just isn't going to cut the mustard anymore.

Here's an interesting parallel build for you. 3mm ID, 28awg kanthal. Meters in at .3 ohms.