Iatty leaking any way to solve this?

[Krang]

Hi, I bought an iatty about a month ago, and I must say, I absolutely love it.

Will pay for itself in the long run and produces tons of flavor/vapor.

But I have 1 problem. The last 2 times I rebuilt the atty I have been getting leaks at the bottom of it. Not from the sides where it screws on, but it leaks from the bottom part, where the 510 connector is. The liquid catcher on my provari keeps getting fulled by liquid, and ends up leaking on the sides. Is there anyway to fix this or to at least make it leak less?

Also, is there a way to buy more of the o-rings that came with it? One of the 2 small o-rings that went on the cup that holds the resistance wire and wick broke.

 

[lee72]

Leaks from the bottom will be through a bad seal around the ceramic. You should be able to get some small o rings from a reseller or do a search on the internet. Or you could take the isolator rubber from an old atty.

 

[zuTma]

Couple of guys said this helped them. look for pics
http://www.e-cigarette-forum.com/forum/gg/208898-iatty-leak-question-12.html

 

[Krang]

Ok thanks for the info. Any idea what the exact sizes are for the small o-ring? I do have some old ce2s lying around... so for now I could just take the rubber part at the top with the 2 holes on the sides and it should temporarily fix the problem?

 

[thedudeabides]

Krang, Clouds Of Vapor sells a complete iatty o-ring set. Hope this helps.

 

[Para]

Before you buy o-rings, try this. Take the mouthpiece off before you fill the Iatty. Put the tank on the base, fill, and THEN put the mouthpiece on. Stopped the leaking dead cold in it's tracks.

 

[RippleInStillWater]

Before you buy o-rings, try this. Take the mouthpiece off before you fill the Iatty. Put the tank on the base, fill, and THEN put the mouthpiece on. Stopped the leaking dead cold in it's tracks.

I always take off the top of tank also; you should always make sure the o-ring that sits in there is loose else it will shove juice through.