I wonder if the wick isn't dripping juice down the center when left alone for long periods. Or if pressure changes could cause it
- Status
If the NR wire is not properly wrapped around the bottom plastic, it will also cause this leak. Do Not cross the NR wire.
Last night I made sure when I took it apart, cleaned everything, then redid my coil that no wires were crossed. I double checked the wires and made sure everything was tight.. Its really not bad at all anymore but itis just a tiny drip... I really dont mind this but if there is a simple fix that would be nice too...Thank you everyone for the help....
Imeo,It is on the GGTS.. I am using it with the 510-901 then 901-510 adapters with the bras top on the collector tank..Maybe I should take the brass cap off the collector resivore then it at least wont leak down the side!...But like I said after using the o-ring like in the photo silentt sent me it really seemed to slow this down considerably!!
Thanks I will do that tonight.. I thought about doing that too but it looks nice with the brass between the SS!!! Thankas again everyone for all the help!!!!!!!
This is the most possible to my opinion fright. If Iatty is overflooded then it will do that. All atomizers leak a little because they breath from the same hole that liquid can come out
I find I have that every morning, but it's very little and easily sucked back up out of the tank. Just some morning gurgle.
I solved this too with Iatty2 valsa. I say again that I am not sure that it will work but I hope for the best
How do you ever sleep with all these NEW ideas you seem to always have. LOL I love that you always have something NEW in the works!!!!
I sleep only a few hours per day fugi and I think a lot. Most of the day I am sitting on my couch with closed eyes and think for several hours. Its a funny situation. My wife and my daughters laugh with me all the time but I dont hear them. I live in GG world those times 
I was overlapping the wire at the last second when I was doing a final snug up. I knew it was something simple!!!!! GOOD TO GO!!
Last edited:
If you go back in this thread there are 2 pics that I posted I have a tiny O Ring on the collar of the plastic stem where the ceramic cup sits, as well as the larger one on the centre post and I get no leaks at all, good luck 
If you go back in this thread there are 2 pics that I posted I have a tiny O Ring on the collar of the plastic stem where the ceramic cup sits, as well as the larger one on the centre post and I get no leaks at all, good luck
Thanks.. T have the one on the bottom like in your pics but I will now try the upper one.. Hope that will fix it....Thanks again!!!
I am constantly getting leaking also, no matter what I do.
I want to try the o-ring tips you guys posted.
I was looking at this kit since someone said they sold good ones : Oring kit from Harbor freights
Will have have the correct o-rings to solve my problem with this kit?
Also I am a bit confused. Are the orings that go on the ceramic cup supposed to be the same size? Cause I got 2 different sized ones... one of which actually broke and I want to also replace with an oring from the kit stated above. Also with the 2 I got, the ceramic cup didnt exactly sit well in the hole :S
My Iatty also leaks from the 510 connector, and I tried taking off the mouthpiece when filling and screwing back on and it didnt solve it for me... :S
I want to try the o-ring tips you guys posted.
I was looking at this kit since someone said they sold good ones : Oring kit from Harbor freights
Will have have the correct o-rings to solve my problem with this kit?
Also I am a bit confused. Are the orings that go on the ceramic cup supposed to be the same size? Cause I got 2 different sized ones... one of which actually broke and I want to also replace with an oring from the kit stated above. Also with the 2 I got, the ceramic cup didnt exactly sit well in the hole :S
My Iatty also leaks from the 510 connector, and I tried taking off the mouthpiece when filling and screwing back on and it didnt solve it for me... :S
Last edited:
Put 2x3/1,8 o-rings around ceramic Hrang. As for the leakage, did you check the number 96 post on this thread?
Yes I have, that is why I was asking if that kit had the o-rings I needed. I looked around for a few kits and cant find none with 3/1,8 o-rings .... or am I just not reading the description right?
https://www.oringsusa.com/catalog/index.php?cPath=482_488 has them. But there is a minimum order.
- Status
