Iatty NR wire
- Thread starter smitty727
- Start date
- th_trl_thread_readers 0
- Status
smitty,
Most of us use .999 silver wire such as this: http://www.e-cigarette-forum.com/forum/gg/235448-999-fine-silver-wire-super-cheap.html#post4452701
I Recommend 30 ga Dead Soft others may use a different thickness and hardness such as Half hard
Most of us use .999 silver wire such as this: http://www.e-cigarette-forum.com/forum/gg/235448-999-fine-silver-wire-super-cheap.html#post4452701
I Recommend 30 ga Dead Soft others may use a different thickness and hardness such as Half hard
Also if you want a buttload of the stock NR wire you can order it from here
wires.co.uk : Bare Nickel Wire
the stock wire was .236mm looks like they don't have it but the .274 should work or the .2mm would probably work. These wires do have a little resistance but you use so little it shouldn't effect your resistance by much. Either one would last you half of forever.
I am undecided on which NR wire I like better. I have a bunch of silver wire from COV (not sure which guage) but it is soft and I break it all the time. I never broke the nickel wire but it does have some resistance and can be a little trickier to use.
wires.co.uk : Bare Nickel Wire
the stock wire was .236mm looks like they don't have it but the .274 should work or the .2mm would probably work. These wires do have a little resistance but you use so little it shouldn't effect your resistance by much. Either one would last you half of forever.
I am undecided on which NR wire I like better. I have a bunch of silver wire from COV (not sure which guage) but it is soft and I break it all the time. I never broke the nickel wire but it does have some resistance and can be a little trickier to use.
COV does have nickel no resistance wire back in stock, jus' fyi
- iAtty No Resistance Wire - Nickel
- iAtty No Resistance Wire - Nickel- Status
