- Status
Hey Wharf you got me seeing what my computer can do... thanks.
Here's the proto pyrex but i don't think Jonah is doing them ... he's got SS though.
Attachments
Running some fusions in a Phidiac Pyrex tank too,cant beat the fusions especially the higher ohm ones and in pyrex it's a good thing.
I would like to know about how long an order stays in the "awaiting fulfillment" stage before being shipped? Any approximation would be appreciated.
I traded for a brand new io6 and a DT....super atty...LOVED it. BUT, when I tried to get the DT off, the whole atty came apart and the DT is still stuck on the atty,,
Anyone had this happen....Bummer, I am only asking because I do like the look of the DT's but would like to know if this has been addressed before I order anymore of the nice ones.?.
But, I did order two more (io6's) from Sir Isaac and LOVE em. Thankfully I was short .50 cents for a DT and asked for a freebie, which my good sir gave me in the package, it doesn't have the reinforced bottom, which of coarse I am thankful for, because it fits looser and there for it wont ruin my atty.
Anyone had this happen....Bummer, I am only asking because I do like the look of the DT's but would like to know if this has been addressed before I order anymore of the nice ones.?.
But, I did order two more (io6's) from Sir Isaac and LOVE em. Thankfully I was short .50 cents for a DT and asked for a freebie, which my good sir gave me in the package, it doesn't have the reinforced bottom, which of coarse I am thankful for, because it fits looser and there for it wont ruin my atty.
My last order shipped in about 24hrs. Remember, Isaac is a one man show, and carries the best hardware and juices...busy man. Along with holidays and I believe a birthday in the family. Regardless...VERY MUCH worth the wait.
yeah but not to me... I usually take the d/t off to drip for a clean vape, so i try to keep it a bit loose on the barrel, not all the way down. I use the black one.
I think the d/t issue will be addressed by accessory vendors once the i06 gets established in the vape world. It's only been a little while since they've been available.
I ordered a theecig.com pyrex for it, which will be the bomb, for sure, but i still want to make a sleeve adapter for other d/t's and the VVPV from notcigs.
The black one without the reinforced bottom is the one I got with my new order and it fits nicely. The DT that ruined my first io6 was reinforced at the base and I was not aware there was an issue, or I would not have pushed it on all the way. Not a great big deal, just sorta sucks I only got to use the atty for about an hour.
Live and learn.... Small price to pay for such a great product. Where would we be without Isaac and IKV...
Well, I get my package tomorrow with 4 io6's and two dt's. I got some apple tobaccy and Bounty Hunter waiting here to get vaped.
Say - 2 days ago I left a message for Isaac using his website contact form. I also PM'ed him as previously when I did this he said it got lost in his 'orders' thread.
Anyway, just wondering what's the norm to hear back from him. I don't know if it got lost again or he's just busy.
The contact was about a mistake in what was shipped in my 2nd order.
Does it usually take this long to hear back? Is there a better way to contact him with a follow-up on an order mistake?
Please, these questions are not meant as a 'bash' or 'negative' to Isaac. I understand someone like him can get quite busy, just looking for what's reasonable when dealing with IKV questions and follow-ups on something like this.
Anyway, just wondering what's the norm to hear back from him. I don't know if it got lost again or he's just busy.
The contact was about a mistake in what was shipped in my 2nd order.
Does it usually take this long to hear back? Is there a better way to contact him with a follow-up on an order mistake?
Please, these questions are not meant as a 'bash' or 'negative' to Isaac. I understand someone like him can get quite busy, just looking for what's reasonable when dealing with IKV questions and follow-ups on something like this.
Good call Ruppy! He did and totally taken care of 
With regards to the V2 io6 Driptips. I had a handful of folks come back saying the tolerances were too tight which is extremely unfortunate. If anyone is having problems please know we got you covered.I promised to be on the forums more since we obtained an employee, and after that specific night he called out for the week save for a day
Regardless, Ecf WILL be a daily routine. I just don't want to delay orders especially for Xmas.
With regards to the V2 io6 Driptips. I had a handful of folks come back saying the tolerances were too tight which is extremely unfortunate. If anyone is having problems please know we got you covered.I promised to be on the forums more since we obtained an employee, and after that specific night he called out for the week save for a day
Regardless, Ecf WILL be a daily routine. I just don't want to delay orders especially for Xmas. 
Iken, if you are still around I sent you an email this afternoon concerning my order#30382. You sent me the wrong stuff.
thanks,
thanks,
Use you wifes hairdryer and warm up the DT and slide it on, do not force it. If it doesn't bottom out, heat a little more until it does seat.
I am having the same problems with my DTs (the ones I fabricate) but in reverse, some are too loose, yet everyone was snug when it left the shop I have one IO6 where the DT fits on it way to snug for my liking, yet fine on others.
I am having the same problems with my DTs (the ones I fabricate) but in reverse, some are too loose, yet everyone was snug when it left the shop
I have one IO6 where the DT fits on it way to snug for my liking, yet fine on others.
Good call Ruppy! He did and totally taken care of
With regards to the V2 io6 Driptips. I had a handful of folks come back saying the tolerances were too tight which is extremely unfortunate. If anyone is having problems please know we got you covered.I promised to be on the forums more since we obtained an employee, and after that specific night he called out for the week save for a day
You talkin' to me?
Thank you.
You mean something like this? Yea - me too. Tried freezing it - didn't help. Tried hot water after it came apart - didn't work. But to attest to how well these are built - when I put it back together it vapes fine! I guess it has a permanent blue tip until it dies.
- Status
Similar threads
- Locked
