Ikenvapers Chat (the door is open for EVERYBODY! Come on in.)

Status
Not open for further replies.

Ozwald

Vaping Master
ECF Veteran
Verified Member
Nov 12, 2013
5,303
20,368
Montana
Morning miss Fran, looking lovely as always :)

Performance-wise, it's hard to believe these Platinums are from the same place as the Fusions I tried. They work great... except... I have quickly learned that I cannot live without the flange. Even being ultra careful, I lost a few drips of juice after filling the tank, which is likely a skill I could master with some practice. The bigger problem was when I was out this morning the tank wouldn't stay put. I pinched off the airflow a few times, then the tank came up & I almost lost my drip tip, probably because I had it slightly too high to not pinch off the airflow again.

The actual vaping performance is remarkable though. They'll definitely be appreciated on the tanks that stay at home, but I'm going to have to swap the one back out of my daily morning drive tank with something that has a flange on it.

Since the only Fusions I've got so far were from the bad batch, are they supposed to have the same size punched holes as the Platinums do? The bad batch ones were tiny, less than half the size of the Platinums.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
It's Football time !!!

You mean it's Seahawks time don't you? After all they are the 2014 definition of football.
100px-Seattle_Seahawks_Vector_Logo.svg.png


I better shut up or Wharf will black my other eye.
punch-in-the-face.gif
:laugh:
 
Last edited:

DJLEC

Ultra Member
ECF Veteran
Verified Member
Nov 12, 2013
2,230
9,341
Union City, California
Performance-wise, it's hard to believe these Platinums are from the same place as the Fusions I tried. They work great... except... I have quickly learned that I cannot live without the flange... snip ... Since the only Fusions I've got so far were from the bad batch, are they supposed to have the same size punched holes as the Platinums do? The bad batch ones were tiny, less than half the size of the Platinums.

Can you elaborate on how to identify the Bad Batch Fusions since I have been trying when available to build a little stash of the SR Mega Fusion Punch - 3 Ohm.

I have not tried these yet but I did try a LR Mega Platinum S yesterday with a new Tank and the 1st one was DOA which surprised me. After replacing it I was very impressed but I agree since I also prefer a Flange. I will send a note to Isaac about the DOA since I am anxious to build my stash a little further when he gets more of the Fusion Flanged in.
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Can you elaborate on how to identify the Bad Batch Fusions since I have been trying when available to build a little stash of the SR Mega Fusion Punch - 3 Ohm.

I have not tried these yet but I did try a LR Mega Platinum S yesterday with a new Tank and the 1st one was DOA which surprised me. After replacing it I was very impressed but I agree since I also prefer a Flange. I will send a note to Isaac about the DOA since I am anxious to build my stash a little further when he gets more of the Fusion Flanged in.

Like I said in an earlier post I have 10 510 Punced SR Mega Fusions from before the bad batch that I'm not going to use that I'll let go.
 

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
Is the feature powerful enuf to get me some Platinum Punch?
:D
:laugh: I like how they turned out but I have been using a billetbox on a Platinum V2 like an addict!

Isaac did the ingredients of the Tonacco eliquid change or is it me? I have been vaping 555 lately in hopes of getting the taste back where it was on the tobacco in case it's me.

Thank you my dear friend. You know my motto "one picture is worth a thousand words."


I just saw that, Sweet! I wished I would have waited to order but next order I'll pick one up.

BTW I LOVE these new Black Evods. They seem to vape better than the originals that I already liked and with the removable Drip Tip everyone can use their own special Drip Tip on them. They put out loads of vapor and look very nice too.

EvodV2_zpsf47d367c.jpg
Haha beautiful pic J5! Nice Driptip :D It fits it very well! Those evods, finally we got to toss some good coils in there! Ugh I know what you mean about the liquid Ry4 did that to lofty and now to me. I just can't taste it for the life of me! It smells absolutely delicious but nothing on the tastebuds. I too flipped between 555 and started routine liquid shopping. Came back to the Gold, the first few hits were stunning but then right back to Nothing! It's killing me! Now I activate whiff the air then take a puff :laugh:


Isaac, I wasn't kidding about those 35mm platinums. Someone help me I can't see haha

yylu9.jpg
Check you out Mugs!! That is hilarious!!! Now that is a perfect example of all the right ingredients!! I was watching someone on youtube who started their own liquid line. Then a rant broke out on not recommending evod, protanks and all others in the category blaming it on quality control. 1st off, all those types come from different factories with Nothing save for the design in common. There is only one common denominator here and it's not hard to see what is really at play here, but the poor fans just believe these words as a given fact and due to the volumes of them, it's overwhelming and does cause an impact on the market. Sorry to rant about that, it's just been on my mind and needed to be released.
Oooo new stuff??? :) You can tell us, no one's reading this thread anyways. :D

Just popped in one of those Platinum replacements you sent me last week. Still priming it, but holy crap the holes are HUGE. Gotta run hobble rather slowly (& shake my cane at unsuspecting children), but can't wait to puff on these. Priming with the IBT thingy is ridiculously easy with these compared to the bad batch. It's like the juice just wants to be in the carto instead of trying to force it in at gun point. I'll check back in when I get back in a couple hours with the verdict.
Lol I'm not even going to look at the numbers of views on this thread! I have to give the folks who were on the notified list a chance!
This is what it was All threaded design and epoxy free Puritank V2
PuriV2_zpse75be7f8.jpg
PuriV2side_zps128556c7.jpg

Whoa on the tank! That's terrible! Ah I wish I had more of these driptips from the raven tank concept to anchor it down! I did a quick search and found something similar that may help hold that badboy down. Stainless Steel 901/510 UFO Drip Tip
Thank you - This was done.
All taken care of sir! Thanks a million Oz!!
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I love it and thanks to this really great friend I already have one of those tips.

Haha beautiful pic J5! Nice Driptip :D It fits it very well! Those evods, finally we got to toss some good coils in there! Ugh I know what you mean about the liquid Ry4 did that to lofty and now to me. I just can't taste it for the life of me! It smells absolutely delicious but nothing on the tastebuds. I too flipped between 555 and started routine liquid shopping. Came back to the Gold, the first few hits were stunning but then right back to Nothing! It's killing me! Now I activate whiff the air then take a puff :laugh:
It does fit nice on it huh? Looks like it belongs there. Plus it works good too. It is a little airier than I like so I put a small piece of clear tape over one of the vents and it is premo. It also puts a little life back in the juice. Too bad they can't keep everything the way it was each batch. Go figure huh? Oh well at least it's not a total loss. BTW I have a bunch of the old batch of RY4 if you need some.
Are the coils in the Evod the same as the ones you sent me awhile back? It sure seems like it and I think them coils are 100 times better than the other ones. Plus they last forever. I got over a month on one coil.

Now we can officially get started!!! :toast:

5c-loves-this-post_zps3d3a1737.gif
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread