- Status
well it looks like they've updated the description and choices. but still out of stock.
I want to thank you all for being so patient and wonderfully understanding about this rather embarrassing eventuality------
we never have announced a product available befiore we have it in our hands,
and we took amleap of faith with Indulgence and believing it wiuld absolutely be here, we announced the shop release date----
BIG MISTAKE --- hahahahahahha
but any way the reason for the delay is really our own fault-----
David went to manufacturers factory to pick up our stock,
when he examined the 901 bodies
and caps,
he saw the thread connectors were sitting proud,
so he rejected them
and demanded they be remachined immediately
and he stood there and is sitting there and waiting
till they redo them all-----
theyu will be flush - and perfect------
David also sat on the assembly line with the workers and did quality control for 4 hours, while our run came thru-
he watched, and checked, and rejected any that did not meet his strict standard, and sent them bach for refinishing-----
so he is on the ball for us all----
more later-------------
we never have announced a product available befiore we have it in our hands,
and we took amleap of faith with Indulgence and believing it wiuld absolutely be here, we announced the shop release date----
BIG MISTAKE --- hahahahahahha
but any way the reason for the delay is really our own fault-----
David went to manufacturers factory to pick up our stock,
when he examined the 901 bodies
and caps,
he saw the thread connectors were sitting proud,
so he rejected them
and demanded they be remachined immediately
and he stood there and is sitting there and waiting
till they redo them all-----
theyu will be flush - and perfect------
David also sat on the assembly line with the workers and did quality control for 4 hours, while our run came thru-
he watched, and checked, and rejected any that did not meet his strict standard, and sent them bach for refinishing-----
so he is on the ball for us all----
more later-------------
This is something worth waiting for. I do want it to be made right even at this price. It is going to be such a nice gift for my friend. Tell David thank you for me.
I thought I was fluent in Australian.;-)I guess not. What does sitting proud mean? Too high?
I am no expert, but I do believe that is what "sitting proud" means. That it was not flush, it was sticking up to far. Hope this helps.
Kona ---- yes-- hahaha means - sitting proud - raised up- yes- hahaha
stormy
thanks so much for your kind support for David
he will appreciate it very much--
do you believe that he has slept there
at the manufacturers factory for the last 3 nights-------
what we have seen of these on vid cam
and photos is unreal-
honestly- this is gonna blow you all away-------
I have had this for 1 week-- one of 4 prototypes
it fits perfectly into the palm of the hand--
such a brilliant device--
the vape coming off this at 3,7 volts
on 1 protected cr123 is unbelievable-----
and the 6Volt addon extender cup will blow
you 6 volts vapers minds away minds
We are hoping to present to you all
3 colors of Indulgence attys and Pasthru
all together in the very near future--
The button has been designed, and manufactured
especially for the Indulgence ecig----it is brilliant ,
and has a 1 million push test score--
on the button depressor machine
this battery is giving a consistant 6 hours +
constant vaping on a overnight (8hrs) charge
batter y is protected so no probs wit o'nite charge.
The other excitement is the potential of having
at the same time we hope now -------
WAIT FOR IT------ WHERE ARE YOU GUYS --------
****** PASS THRU *******
this is a revolutionary passthru
wait till you see this !!!!!!!!!!!!!!!!!!!
talk about small
sleek and unbelievable vaping producer----
and thats not all -------------
yes---- the be all and end all for pass thru ------
the USB Mobile Power Pack
so thanks for your understanding on this hic cup-
Please bear with us, it is so close we can taste it!!!
OH and ONe more that I will tell you tomorrow !!!!!!
hahahahaha Got ya again huh?????
Last edited:
The only missing accessory, for me, is something to carry indulgence with a spare battery, like janty stick pouch.
Di,
Since you have a prototype there, something you might want to do if you have a multimeter: Measure the voltage output of your battery by itself, then install it in the unit and measure the voltage through one of the atty connectors.
I ask this because I bought one of the other "bargain" hi end PVs and was surprised to see it lose about 10% of the voltage going through the unit meaning it doesn't get as hot as a real high end PV would. I then burn through batteries quicker trying to get enough vapor.
Since you have a prototype there, something you might want to do if you have a multimeter: Measure the voltage output of your battery by itself, then install it in the unit and measure the voltage through one of the atty connectors.
I ask this because I bought one of the other "bargain" hi end PVs and was surprised to see it lose about 10% of the voltage going through the unit meaning it doesn't get as hot as a real high end PV would. I then burn through batteries quicker trying to get enough vapor.
Does the charger that comes with the basic kit charge the 3.0v batteries? Does it have a switch to select 3.0v and 3.7v charging?
Gosh dern it Di! Now you finally done it! I gotta have one of these!
blue ----
hahahahhahahahhaahhahahaahhahahhaha knew I would get ya ----8-o
hidaho ---
just wait till later -- hahahahaha-- see what I got for you -- ahhaahahahahahahahahahahahahahahhahahahah ------------8-o
tease ----tease ---- tease ------8-o8-o8-o
Kona ---
thank you so much for this------
I am not very " au fait " with this type of thing myself --
but I will get a friend to do exactly this and let you know
I am informed that with an all metal body ecig
and with no wires and no solder to inhibit the power conductivity
that in fact the effincency is increased by 20%,
so we can expect good things from this new generation
of all mechanical ecigs coming onto the market now.
Di,msinfo
I suggest that you contact the manufacturer
they would be best suited to answer these types of
technical questions about their product...............
I would ask you to think about this through --
if you are tampering with the product in any way
please understand that you are voiding any warranty that may be offered.......
Appreciate prompt reply and advice. I'd be happy to speak to the manufacture if you can give me their contact info (I hope there is somebody there who speaks English; outside of a couple of phrases learned from Chinese friends here and knowing how to count to 10
I don't speak Chinese). Would it be possible to buy an extra section with button from EM? This way I will have something to modd without risking damage to the beautiful device. Thank you,
Alex
It may have been said. I didn't read through the whole thread. However, would anyone like to see Lily INHALE and then see the vapor production? That would be bice to see!!
On top of that...I have no problem with your advertising, but to advertise that on this forum seems a little inappropriate since I can't say .... here. Seems as though it is a double standard...partial nudity is fine since we are all over 18, but language isn't. I don't get it. Is it 18 and over or not?
On top of that...I have no problem with your advertising, but to advertise that on this forum seems a little inappropriate since I can't say .... here. Seems as though it is a double standard...partial nudity is fine since we are all over 18, but language isn't. I don't get it. Is it 18 and over or not?
- Status
Similar threads
