-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
Indulgence Mt-Rta
- Thread starter 98ruby
- Start date
- th_trl_thread_readers 0
- Status
Anybody wicking their Mutank with Rayon? Looking for suggestions the juice channels are huge on the Mutank and Rayon tails are supposed to be thin, so I am a little confused how much tail to put into the channel, I normally trim about 60 percent of the tail of Rayon for my other tanks but wondering if I should leave thicker tails for the Mutank just because the juice channel is so wide and so deep.
Thanks! Pictures are always helpful too but just looking for some guidance first time building the Mutank... Have the velocity style deck for it as well so really excited feel like this Mutank could be at least as good as the Aromamizer which I love using already
I do indeed, but it's in the MT, not the Mutank. Still, the general idea is stuff it full. I usually use a 3.5mm mandrel so I can pull big wicks, then take the tails straight down to the deck, then out the juice channels. Leave the tails long, and install the barrel (it's helpful to leave the bottom tank seal on the base before putting the barrel on). Then trim up close, wet the ends with juice and stuff back flush in the juice channels. I did exactly that last time I build an MT-- MT #3 it was, the black one, black sheep of the family-- and the rotten so-and-so flooded anyway. So I opened her back up and this time laid a strip of rayon-- about 1/4 of the thickness of the rope-- down in the juice channels before pulling the wicks and leading the tails out the channels on top of the filler strips. The nice thing about rayon-- one of the many, many nice things about rayon-- is it doesn't swell and choke off like cotton does. I am going to break down and rebuild MT #1-- MT #1 is a good boy, usually-- later today if Jeebus is still my buddy. I've had some Alien and Tiger Kanthal shots laying on my desk for a couple days now and they're staring at me in an accusatory fashion. I intend to use the filler strip method when I do. Here's some pics of the filler strip method:
For the most part I think they were just pickin at you
.Side note for cotton users, since cb is supposedly medical (dental) grade cotton has anyone try something like this?1Lb Cotton Roll By Medline - Wrapped, Surgical Grade - NON6028H.
I would say boiling the shiseido did not go well btw...kinda expected the outcome to be what I see sitting in my pan but was hoping for a different one I guess.
Most of us like it better than the Aromamizer. The Mutank and Mutation X are worlds apart, as you'd expect from an RTA and an RDA. The original build deck in the Mutank is much like the deck in the V4, except I has 1 huge airhole below the coil instead of three. The Mutank, obviously, has no side air flow. The Mutank is also available with a two-post/4hole Velocity-style deck, either as an additional part or VaporDNA is selling the Project Sub Ohm version with that deck installed.
Well I don't know much about the problemizer but I do know that the mt-rta is one heck of a tank that just works and doesn't have all the imo unnecessary stuff like juice control and tiny o rings.
If you want simplicity,easy to wick, hard hiitting high wattage capability,then get the mt.
If you want simplicity,easy to wick, hard hiitting high wattage capability,then get the mt.
Can only speak to what I've read between mutank and mt as I only have the mutank. Mutank holds slightly more liquid and has swappable build decks/factory coils where as mt does not. I use the v deck and couldnt be happier. This thing holds a massive coil and has great flavor/vapor production. Once you get the wicking down on it the mutank is a "beast" of a tank. Compared to my stm's and goliath v2's the mutank is hands down the winner.
I have a feeling mutation would build an amazing single coil tank as well. I'd really like to see them produce one.
Just put the rubber plug into the mutank and you have single coil...or do you mean a deck like the stm?
No. Still waiting on the ribbon wire. Probably be here tomorrow. I do have some tiger shots, which are very similar. I am likely to do those today.
Gotcha, deliveries on mlk day? I'm gonna have to order 2 more sets of batteries for the rx's. Only thing either of us hate about it is when it's time to charge lol. Hmmm reminds me I need to go rewick her gv2.
Forgot about the holiday. For tomorrow read Tuesday
ANd yeah, if/when I order another RX, I will need at least one more set of batteries 
I have the MT and the Aromamizer and enjoy both. I think the vapor and flavor is a bit better with the MT but I feel the quality with the Aromamizer is better. I did have problems with leaking on the MT but I have solved it for the most part with better wicking. The MT has top fill which is a big plus but find my black MT paint job is nowhere as good as on the black Aromamizer.
The way I am using them is I take the Aromamizer to work and the ejuice lasts me most of the day and it stays dry, but with the MT I mostly use it at home where I have tissues available and don't keep it in my pocket. Mostly just come light ejuice to clean up from time to time. I will say that you will use up tons of ejuice with the MT and along with that comes the flavor. I don't think you will get dry hits with the MT but I don't get that with the Aromamizer either. Both are great tanks and enjoy a place in your collection.
Thanks suprtrkr.... I been using 3 mm coils exclusively with the aromamizer but the Mutank can obviously accomadate more so ill try 3.5mm... Been using spaced but could do some contact coils if spaced wont fit but it prob would the deck and chimney are huge on this thing!You said a 1/4th of the rope for the tails and to keep the tails long. Wondering compared to the rest of the wick how much thinning is that? Would 1/2 the rope fit through the center of the coil and then thin the wicks 50 percent giving you 1\4 the rope for the tails?... Thanks, I'll try to emulate your build pics on my first build and hope for the best.
I do contact coils in just about everything, including the MTs. I used 1/4 of the rope for the fillers in the bottom of the juice channels, and half the rope as wicks in the coils.
Thanks again, least I have some idea now of what to do on my first build. I'll let you all know what it turns out like and try to take some pictures.
Ah, not sure I can go back to single coil in all honesty. Ive gotten so used to having doil coil rtas I cant even use my stm hardly now. It's just not a satisfying vape for me anymore.
- Status
