Ordered this last night. Couldn't resist the price.
Indulgence Mt-Rta
- Thread starter 98ruby
- Start date
- th_trl_thread_readers 0
- Status
Ordered this last night. Couldn't resist the price.
Mine's worked really well too. Kinda why I went for the new TC without waiting for reviews. That and the deal of course.
Last edited:
Yeah,you can't beat that price,i may have to grab one too.I have a 100 watt istick and haven't had any issues with mine either.I got my son one back in September,and his only lasted until mid December before it kept saying battery low,and wouldn't do anything else,he says he didn't drop it or anything,but i suspect he probably got juice on the chip because he is horrible about way over dripping in his rda.
I just bought an XCube2 almost new from the classifieds. It should have enough power to fire up some of these tanks.
I have some 316 and 304SS wire in 26g coming today. I have to rebuild my MT, and figured I'd go for a stainless build. My dual parallel 26g worked so well, I hated to tear it out. I threw in a dual 26g N80 build at .28 ohms, but I had trouble with the wicking. I tried the wick through the post with the coil wicks, but I think I got too much in there because I wasn't getting nice juicy hits, and it wouldn't work above 50 W, kept getting dry hits. I opened it up and thinned it down, tried again, still bad. I went with the normal wicking. I'm not getting any leaks, and I do get a bubble or a few come out, but I still can't hit often and still not over 50W. Today, I'll tear it down again and go with stainless and try wicking again. I'm getting a bit frustrated, but I'm not going to let it defeat me.
Sent from my HTC Desire Eye using Tapatalk
I have some 316 and 304SS wire in 26g coming today. I have to rebuild my MT, and figured I'd go for a stainless build. My dual parallel 26g worked so well, I hated to tear it out. I threw in a dual 26g N80 build at .28 ohms, but I had trouble with the wicking. I tried the wick through the post with the coil wicks, but I think I got too much in there because I wasn't getting nice juicy hits, and it wouldn't work above 50 W, kept getting dry hits. I opened it up and thinned it down, tried again, still bad. I went with the normal wicking. I'm not getting any leaks, and I do get a bubble or a few come out, but I still can't hit often and still not over 50W. Today, I'll tear it down again and go with stainless and try wicking again. I'm getting a bit frustrated, but I'm not going to let it defeat me.
Sent from my HTC Desire Eye using Tapatalk
I think you will like the ss wire. 316ss 9-10 wraps 2-2.5id is one of my go to builds for ss wire.
SS wire is nice, I've been running the 316L dual Clapton 3mm coils in my troll for a while and really like it. At first coming from kanthal to SS I didn't like it but after using it for a month then going back to kanthal the flavor difference is pretty big to me
Sent from my Nexus 6 using Tapatalk
Sent from my Nexus 6 using Tapatalk
I'm not going to go to Claptons right away, until I determine I like SS. But with stainless, I'll have to have more wraps to get the resistance up to around .3. More wraps, more surface area, and hopefully great flavor.
Sent from my HTC Desire Eye using Tapatalk
Sent from my HTC Desire Eye using Tapatalk
Been to busy & lazy to build the vcmt yet. What did you peeps buy from the fastech sale? I think i am going to try them for the first time. Hopefully the wait won't drive me nuts
My order was dinky
Train RTA
Extra glass for a couple attys
2 drip tips.
Another rx, Cuboid or new istick 100W are tempting though!
So far for the fasttech order I'm at
2 black tfv4 tanks
4 tf-t8 5 packs of coils
2 clp-2 5 packs of coils
I'm still looking around but that's what's in my cart right now
Sent from my Nexus 6 using Tapatalk
2 black tfv4 tanks
4 tf-t8 5 packs of coils
2 clp-2 5 packs of coils
I'm still looking around but that's what's in my cart right now
Sent from my Nexus 6 using Tapatalk
This!
I have a 9/10wrap of 26ss at 3mm. Hits fantastic. Each coil is about .8. Resistance to me on my mods is just a number. I don't shoot for a target resistance ever.
EDIT:
Unless it's too low for my mod cut off.
Last edited:
Yeah, I'm the same way, unless I'm building for a mech, I could care less what the resistance ends up at (as long as its not too low like you said).
You're right. I've been building mechs for so long and new to the regulated life. I built mine 7/8 wrap, 2.5mm, 26g ss and it came out just above .3 and it kicks like a mule! Liking it so far.
has anyone tried VCC - vapers choice cotton?? i got some the other day and was curious about it.. it says its supima cotton. if anyone has any insight on it please let me know
Ok I received my stash on SS wire from the UK yesterday. So perfect time to try a build on the vcmt. I will attach the steam file so you can see. At 60-70 watts this build is producing big & dense clouds and great flavor 8/10. I used 1ml of juice to prime the build and the other 5ml to fill the tank. I like a cooler vape and this worked out perfect. The thicker ss430 was a pleasure to work with after using the 28g for so long. SS clapton coils coming soon!
Coil wrapping
Coil wrapping
Last edited:
- Status
