Indulgence Mt-Rta

[roxynoodle]

I've just never gotten into drippers. I like my squonkers, but not quite as much as my RTAs. I have a few RDAs, although most were gifts or sent to me for beta testing. I mostly use them for juice testing. As we know, my coil building isn't all that imaginative so tanks are much more convenient. I don't even know where to start to make alien or similar coils.

 

[Adam harris]

Yah, I think we got another one here people!
I got all nostalgic last night & threw a new build on my Mutation V4 and vaped for a while. Back on the tank first thing this a.m.!

Woot!!

 

[MMW]

@Jvincent516 how did those aliens come out?
Sent from my MT-RTA

 

[John Eldredge]

I'm much more of a tank user, I have a haze rda which is ok, and I did pickup an alliance v2+, because it's a steal for 50 bucks imo, and with some big claptons it's pretty insane, but I only use it occasionally on the weekends, and back to my mt, Bellus, and aromamizer. I just bought another mt today with the money I was gonna spend on the crius, but I think the crius needs a few tweaks, but it looks like a promising rta... Mt is the only one I own 2 of! So that says something. The juice wells are the trick, stuff them full, they are big enough the same wicking works for Max vg or 50/50, that's the beauty of this tank. All the others take different wicking methods for different viscosity juice! My first mt was defective, btw, it literally fell apart within a week, but I returned it and quickly bought another one. It's that good. Internet pic of the alliance v2 below if anyone hasn't seen it, it's awesome

 

[MMW]

@John Eldredge how did it fall apart?

 

[Bman123]

It looks a lot like a mutation x with bigger lost holes

Sent from my Nexus 6 using Tapatalk

 

[Adam harris]

I'm much more of a tank user, I have a haze rda which is ok, and I did pickup an alliance v2+, because it's a steal for 50 bucks imo, and with some big claptons it's pretty insane, but I only use it occasionally on the weekends, and back to my mt, Bellus, and aromamizer. I just bought another mt today with the money I was gonna spend on the crius, but I think the crius needs a few tweaks, but it looks like a promising rta... Mt is the only one I own 2 of! So that says something. The juice wells are the trick, stuff them full, they are big enough the same wicking works for Max vg or 50/50, that's the beauty of this tank. All the others take different wicking methods for different viscosity juice! My first mt was defective, btw, it literally fell apart within a week, but I returned it and quickly bought another one. It's that good. Internet pic of the alliance v2 below if anyone hasn't seen it, it's awesome

How did the tank fall apart?

 

[arh32]

Re-wick 5min BOOM ready for another week of clouds !! BTW cotton was still white on one side so used a bit less this time, you really dont need to use so much cotton with this. Nice fat bubbles coming out!!

 

[Bman123]

I normally use cotton balls but I used the Japanese cotton pads for the first time with this tank and I know I used too much wick. I'll use a little less next time but at least my tank ain't leaking lol

Sent from my Nexus 6 using Tapatalk

 

[arh32]

Dry hit city when i first got it. Backed off the cotton and its all good!!!

 

[Bman123]

I'm not getting any dry hits but I know I've got too much cotton in it. I've never used Japanese cotton pads and cut the strips a little large

Sent from my Nexus 6 using Tapatalk

 

[John Eldredge]

How did the tank fall apart?

First after 2 days the resistance was all over the place. The 510 pin would spin and not adjust. I never used anything stronger than my thumbnail on it, so I know I didn't strip it. Then in my pocket the chimney came apart at the seam that never comes apart, it's press fit not threaded. So I got a pocket full of juice. My 2 new ones are fine, and have been for almost 2 weeks. I just hope my first mt was a fluke. But it should not be a press fit, should be one piece or threaded like a lemo cap

 

[Bman123]

When my local store first got them I went to get one and man the quality was bad. Both of them had half stripped screw heads, the one wouldn't come apart unless I really forced it and the other one had loose o rings on the glass section.

I didn't buy either of them and went to a different store where I got the one I'm using now. So far pretty good, I do have a spot where the finish is wearing off but I expect that out of a $30 authentic, everything else has been rock solid.

Indulgence has a big following and they knew they did a damn good job on this rta so I figure some stuff will slip by qc when they are mass producing these things.

Sent from my Nexus 6 using Tapatalk

 

[MMW]

Love this tank. Just keeps going with consistency.

 

[roxynoodle]

My Project Subohm edition one is excellent compared to Satan. Night and day quality difference.

 

[Bman123]

My Project Subohm edition one is excellent compared to Satan. Night and day quality difference.

I'd hope so, they put their branding on it

Sent from my Nexus 6 using Tapatalk

 

[John Eldredge]

I'm not complaining about it, it's an isolated incident, my local brick and mortar took it back and put a new box in my hand, and it is so good I bought another one...

 

[Bman123]

I've been debating buying another one but I know how indulgence is. Soon as I buy another they'll have a pre order up for the V2.

If they fix the top fill by putting another hole in it to prevent the vacuum I'll be good, I really have no complaints

Sent from my Nexus 6 using Tapatalk

 

[John Eldredge]

True! I think the best top fill is a sliding door like my lemo 2 has. You can fill it laying on its side, and sliding the door shut does not compress the remaining air in the tank, which always causes a little excess juice and a juicy first hot or 2 in other top fill tanks. (Bellus and mt)

 

[Bman123]

Being able to just fill it without taking the top cap off would be nice

Sent from my Nexus 6 using Tapatalk