1) Dont screw hard the telescope, you will damage batteries and you will decrease the life of its threads, so you must stop screwing when you feel the first resistance. The contact is established.
2) Dont overtight the atomizers. There is no reason for this, the contact will not be better if you do this and maybe you will damage the connector.
3) Dont overtight the locking button option, you maybe unscrew the whole button and damage its threads.
4) Dont try to screw the atomizer if you see that it doesnt go easy on the connector because the most possible is that you try to screw it in the wrong way. Try to screw it straight.
5) Clean all threads with cloth and proper cleaners, otherwise GG will not screw properly, it will get stuck or lose contact
6) Sand the base of the button and the small axis in the front cap with at least 1000 sandpaper only if you see that you need more strength that the usual to push the button to fire GGTS.
7) Dont overtight any of the GGTS pieces like the front cap, the extension or the back cap. The contact will not be better and maybe you will be not able to unscrew it again easy. Also you will decrease the life of the threads. When you see that threads are starting to stuck a little then its time to clean them.
Be gendle with your new e-cig, no reason to push it because you will not earn anything.
8) If you see that GG is not vaping then the first thing you have to do is to reset the telescope position. You can screw it 1/4 of cycle and unscrew it 1/4 again so metals can make the contact again.
Thats all. These instructions are nothing special, they are the proper instructions that every mechanic gives to his buyers for every screwing device.
You will have soon the best vaping with the best feeling in your hands, I ensure you, just wait a little more for my sellers to get them
2) Dont overtight the atomizers. There is no reason for this, the contact will not be better if you do this and maybe you will damage the connector.
3) Dont overtight the locking button option, you maybe unscrew the whole button and damage its threads.
4) Dont try to screw the atomizer if you see that it doesnt go easy on the connector because the most possible is that you try to screw it in the wrong way. Try to screw it straight.
5) Clean all threads with cloth and proper cleaners, otherwise GG will not screw properly, it will get stuck or lose contact
6) Sand the base of the button and the small axis in the front cap with at least 1000 sandpaper only if you see that you need more strength that the usual to push the button to fire GGTS.
7) Dont overtight any of the GGTS pieces like the front cap, the extension or the back cap. The contact will not be better and maybe you will be not able to unscrew it again easy. Also you will decrease the life of the threads. When you see that threads are starting to stuck a little then its time to clean them.
Be gendle with your new e-cig, no reason to push it because you will not earn anything.
8) If you see that GG is not vaping then the first thing you have to do is to reset the telescope position. You can screw it 1/4 of cycle and unscrew it 1/4 again so metals can make the contact again.
Thats all. These instructions are nothing special, they are the proper instructions that every mechanic gives to his buyers for every screwing device.
You will have soon the best vaping with the best feeling in your hands, I ensure you, just wait a little more for my sellers to get them
Last edited:
