Introducing Sgt VV (Army Tank) - Variable Volt Bottom Feeder

[eastman]

I just got my iatty today!!! My first one I had to sell due to no $$.

Couldn't wait to set it up and was movin to fast when I was widening the grooves on the ceramic piece and broke it. Have to wait a few more days now for replacements to come in .

Oh well I will be with you in a few days stownz. Just need to order some more nextel, silver wire and kanthal wire and I'll be set

 

[Insane]

Nope I disagree both are beautiful ! ! ! But i agree Both are nearly Prefect ! ! ! !

 

[eastman]

I also need to get a v2 sgt vv at some point

 

[Stownz]

I've got extras of all that, but I put those flavors in the mail for yah already this morning. DOH The nextel I bought 25 foot of, no way I'll ever use all that because when I change coils, I just torch the nextel back to white again. Still using the first piece I cut, lol.

I'm not using that expensive pure silver wire, I bought some "Silver coated" wire instead, super cheap.

Good thing about the Army tank is that they don't fall over with the Iatty on top like tube mods. If they fall over, and hit wrong they will snape the connector right off the bottom. Kinda like how a drip tip breaks when you drop a mod. Army tanks just sit there all steady like 8)

 

[eastman]

And I thank you for that stownz. I'll give this DIY one more shot.

 

[Creniker]

Hey stownz, if you decide that the responsibility of bringing up 2 iatties and 1 bulli in this world is to much, I will gladly help you and take one off of your hands. Hell, you said you were looking at the Ato-Miser, I'll hook you up for one of your iattys!

Edit: Whats this nextel you speak of? A wick of some sort? Hows it working? You never gave me the 411 on how your different experiments with different wires and wicks has been.

 

[Stownz]

Nextell xc-116 wick. Its super high temp stuff and wicks hardcore for heavy users like me. I'm using it now along with kanthal 32 wire. I'm aiming for the maximum surface area using the thick wire and currently testing its durability. I'm guessing the thicker wire will last longer also. I've run about 60 ml through this coil here and a Mega 6volt for 2 minute dry burn each night. I'm trying to kill it but it won't die, neither will the wick.seems to me the kanthal wire is just more heavy duty compared to nichrome at the same awg.I did kill a pair of 18350s though doin those long dry burns.... lol thank god for junk tube mechanical mods we don't care about

Think ima skip the ato-miser. Use the bullI as a drip/testing Atty for new juice recipes. Its easy to take apart, rince with water and dry burn and swap flavors. I'm going to master my Jagerbomb flavor one of these days! Gotta quit drink in all the jager though, have more to mix with!

 

[silentt]

Woohoo! I just bought a A2-TM and a bunch of extras for it. Can't wait to try it out, you make it sound great stownz.

 

[Stownz]

Woohoo! I just bought a A2-TM and a bunch of extras for it. Can't wait to try it out, you make it sound great stownz.

Sweet! Gonna try and polish mine this weekend, put some bling in there.

 

[silentt]

I'm glad they offered the mega tank as a whole and not making me order the a2-t plus the mega upgrade.

Yeah I use Mothers metal polish on my stainless steel and it makes them shine. I've probably polished my ssGGTS twice since I've had it and it still looks brand new.

 

[eastman]

If I buy the a2 m in the future van it still be used the same as the a2 classic for dripping when not using the tank?

 

[Creniker]

Nextell xc-116 wick. Its super high temp stuff and wicks hardcore for heavy users like me. I'm using it now along with kanthal 32 wire. I'm aiming for the maximum surface area using the thick wire and currently testing its durability. I'm guessing the thicker wire will last longer also. I've run about 60 ml through this coil here and a Mega 6volt for 2 minute dry burn each night. I'm trying to kill it but it won't die, neither will the wick.seems to me the kanthal wire is just more heavy duty compared to nichrome at the same awg.I did kill a pair of 18350s though doin those long dry burns.... lol thank god for junk tube mechanical mods we don't care about

Think ima skip the ato-miser. Use the bullI as a drip/testing Atty for new juice recipes. Its easy to take apart, rince with water and dry burn and swap flavors. I'm going to master my Jagerbomb flavor one of these days! Gotta quit drink in all the jager though, have more to mix with!

Sounds awesome. You wouldn't happen to have any extra I could buy off of you?

 

[jmarkus]

Sounds awesome. You wouldn't happen to have any extra I could buy off of you?

i actually bought 4x10 feet of this stuff and theres no way i'll ever use it. i just pm'd you creniker, let me know if you want some.

boom.

 

[mwa102464]

J I'm still using the Mod you made me,,, have it set up like Stonze does with an iAtty too, what a super little VV Mod you make Brutha love this dam thing.!

Thank You J

MWA

 

[jmarkus]

also, on the metal version...a tiny little update.

im getting closer and closer everyday, its obviously taking me a lot longer than originally anticipated. i have a 3d printer locked in and a caster that im waiting for a few more details before i sink a bunch of money into this for the prototype. i know i have a bunch of people that have been asking me about the metal version, and i assure you its constantly being sussed out. thanks all for being patient, but i wanna do the best possible job on the enclosure, as much for you as me.

i know thats not much of an update, but i know i havent mentioned it in a while and just didnt want people to think it fell through the cracks or went up in vapor. im getting really excited for the next iteration of army tank.

at ease.

 

[jmarkus]

J I'm still using the Mod you made me,,, have it set up like Stonze does with an iAtty too, what a super little VV Mod you make Brutha love this dam thing.!

Thank You J

MWA

Thank YOU m-dub!!

 

[AaronY]

also, on the metal version...a tiny little update.

Thank you so much for the invite. Waiting for one

 

[Devonmoonshire]

Any news on the metal VV Tank Mods? Another thread has seriously peaked my Interest in this item and after reading through this one and having seen one first hand I am seriously considering one of these. Id there any versions of tis that will take a protected high drain 18650 by chance?

Sincerely,
Nate aka Darth Vapor

 

[Stownz]

no 18650 version atm. The small size of the mod is one of the bonuses 8)

 

[Devonmoonshire]

Okay cool beans, that is okay though because I can get the batteries, they will charge on a standard charger that charges the 18650's though right? Since it is a sliding multi size charger for 3.2 to 3.7v batteries it should work on the 14500's as well.

Nate aka Darth Vapor