Introducing Sgt VV (Army Tank) - Variable Volt Bottom Feeder

[Devonmoonshire]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


Making Me Drool!!!!!!!!!!! I am definitely going to be going NUTZ for three or four weeks waiting on this one I am also getting the Volt Meter attachment as well for testing under load


Nate aka Darth Vapor

 

[ukeman]

where do you get that MM Stownz? that shows loaded voltage?
thanks

yep, the three coils max out at about 5.6 volts, hard to keep them wet even when they are in a tank.

Dual coil attys I have used in the Bulli, work the same as dual coil cartos. 1.5 ohm dual coil I can go up to 5.7 volts.

Loaded voltage on 1.5 ohm dual coil

Loaded Voltage on 1.5 ohm triple coil using AW IMR High Drains

Anyone care to do the math on a 1.5 ohm triple coil at 5.6 volts? hahahahahaha
This mod is a BEAST.

 

[Stownz]

Madvapes Assembled Volt Indicator

 

[AaronY]

yep, the three coils max out at about 5.6 volts, hard to keep them wet even when they are in a tank.

Dual coil attys I have used in the Bulli, work the same as dual coil cartos. 1.5 ohm dual coil I can go up to 5.7 volts.

Loaded voltage on 1.5 ohm dual coil

Loaded Voltage on 1.5 ohm triple coil using AW IMR High Drains

Anyone care to do the math on a 1.5 ohm triple coil at 5.6 volts? hahahahahaha
This mod is a BEAST.

Thank you soo soo much I really needed to see that. Now I can justify getting sarge VV even though I have a darwin. That is amazing. Now I have to wait for the metal version to be out

 

[Stownz]

There are reasons why I vape a lil plastic mod when I have thousands of dollars of metal mods laying around 8)
There is method to my madness, haha. J could probably wrap it all in duct tape and I would still vape it knowing full well the versatility and function make up for lack of mirror finish.

 

[AaronY]

There are reasons why I vape a lil plastic mod when I have thousands of dollars of metal mods laying around 8)
There is method to my madness, haha. J could probably wrap it all in duct tape and I would still vape it knowing full well the versatility and function make up for lack of mirror finish.

I am too clumsy. But luckily the metal VV Sarge is coming out soon. I accidentally leave my mod on my lap then look for it then stand up just to hear it hit the floor. Loss many great drip tips to that. I know the plastic sarge vv can probably survive that and worse. But I do it so often that I think I will be safter with a metal mod.

 

[Stownz]

Lanyard, I have yet to have it fall off my neck 8)

 

[jmarkus]

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


Making Me Drool!!!!!!!!!!! I am definitely going to be going NUTZ for three or four weeks waiting on this one I am also getting the Volt Meter attachment as well for testing under load


Nate aka Darth Vapor

hey nate, the volt meter youre getting from me doesnt test underload...i think stownz got that one from madvapes if youd rather get that one just let me know.

 

[Devonmoonshire]

hey nate, the volt meter youre getting from me doesnt test underload...i think stownz got that one from madvapes if youd rather get that one just let me know.

Ahhh okay, Cool Bro, PM sent

Nate aka Darth Vapor

 

[silentt]

I bought mine from COV Voltage Meter

it does under load also, it's good to have around. it's like 14.99 but you can get 10% off with= bigbuyer

 

[Taniger1]

LOL I go to bed for the day and a voltage meter discussion goes on. Bah, you guys are terrible. Stownz, is the VVAT really that small? No more hurting hands from chain vapeing and all? :0)

 

[bjannr]

I have a problem with my Sgt VV Tank. The magnet came loose from the piece in the battery side of the mod. Both magnets were on the door. I was using a rubber band to keep it closed. I decided to fix it with a bit of super glue. As I was trying to place the magnet, it jumped out of my fingers, and is now stuck near the on/off switch, making it unable to turn off the mod. Any advice as to what I can do?

 

[jmarkus]

I have a problem with my Sgt VV Tank. The magnet came loose from the piece in the battery side of the mod. Both magnets were on the door. I was using a rubber band to keep it closed. I decided to fix it with a bit of super glue. As I was trying to place the magnet, it jumped out of my fingers, and is now stuck near the on/off switch, making it unable to turn off the mod. Any advice as to what I can do?

hey, can you grab it with tweezers or a safety pin? if not just send it back and ill fix it up. send me a PM and let me know how it goes.

 

[jmarkus]

i was always wondering how a thread gets the 5 star rating and if it was possible for this little thread to achieve such status. well, just want to thank you all for helping me finally achieve the 5 star rating! i feel so honored!!!! does anyone know how that happened?

thank you all! its been a fun ride to 5 stars.

 

[washvap]

Congrats and well deserved. The army tank is definitely in a league of it's own.

 

[washvap]

This is how small my hands are. That's a REO Mini. J I hope these guys ARE small with these hands!

It's actually shorter than the REO mini but twice as thick. Not sure if that's to much for you.

 

[Taniger1]

I usually put little finger under the REO to hold it while pressing the button, no give there :0). It's either that or I have to 2 hand it which I'm sure looks funny as all get out /grin. One of the reasons I've pretty much stuck with the Old Goat. It's small enough to fit in my hands comfortably. The button on the OG is also pretty hair triggered. BUT I've bought two of them. The second one died after me using it about 4 weeks, but the one I bought in April or March is still going strong! I'm HOPEING this VV will work well with my hand size (My ring size is 5 to give you an idea). If so, well I'll probably come back for the Metal version :0)

 

[washvap]

Honestly Tanger, it won't be as comfortable in your hands compared to your other mods. I'm only saying that since you got some really small hands. From what you described in your post.

Just to give you a good idea what your getting into. It's basically gonna be like you trying to hold your old goat and mini together. Not AS thick but very close.

 

[Stownz]

i was always wondering how a thread gets the 5 star rating and if it was possible for this little thread to achieve such status. well, just want to thank you all for helping me finally achieve the 5 star rating! i feel so honored!!!! does anyone know how that happened?

thank you all! its been a fun ride to 5 stars.

Close to the top of the page is a "Rate This Thread" dropdown. Enough people rate you 5 stars, you have a 5 star thread on your hands 8)

 

[Harley]

Any news or updates on the Metal version yet ???