Introducing Sgt VV (Army Tank) - Variable Volt Bottom Feeder

[donnah]

Lor-ann's Tart and Sour = atty killer... it's a flavoring... so may not help us if we don't use that type of flavor, but at any rate it could be something in the juice. I'd hate to go to unflavored... won't do it but so far my snickerdoodle etc holds up pretty good.
I have at least 50 used attys that i'm hoping to find an easy way to clean just to see if they are salvageable.

Thanks for asking.. I don't use any Lor-ann's flavoring. Is the snickerdoodle from kbv? I have some warm sugar cookie from them and my cartos do last longer when I use that. I have a friend who uses that and says her's last 2 weeks.

The unflavored juice is really very good! I use it plain unflavored and then I have some that I add just a few drops of PA flavoring. I started this 2 weeks ago and the carto that I started using is still going strong right now! Also, I have a dual coil carto that I alternate using Tasty Vapors juice and unflavored and it's been going a week now and going very very good. (and it is one that I cleaned!) The filler is still nice and white with none of that nasty burnt look that I've seen. The unflavored seems to flush out the bad stuff. Unflavored actually has flavor to it, a clean, sweet, almost caramel flavor. I love it!

A rebuildable atty... Jmarkus, is that anything you can't do!!

 

[washvap]

Very nice, like how it's a tank/bottom feeder atomizer all at the same time.

I wanted the rebuildable to be as repairable as possible so i added a ce2 ceramic cup to stop any potential shorts on the center positive post/feeding tube/air flow, added terminal posts that plug into ss needle slots (posts, cup, wick, and wire all replaceable by user), ss posts are soldered in with lead free solder. i also tried filling the chamber with e-juice (about 1 ml, just under the ceramic cup) and everything seems to work pretty darn great, no leaks. so you can bottom feed, drip and fill the chamber with at least 1 ml, maybe more...havent measured. loving it so far.

 

[jmarkus]

Very nice, like how it's a tank/bottom feeder atomizer all at the same time.

thanks! as long as you dont fill it past the ceramic cup it seems to work great as a tank, but also great to get to use the bottle of juice for bottom feeding with a quick inhale and squeeze.

 

[washvap]

No problem, I haven't seen anyone else make something that is similar to yours. Really digging the method is which it's fed when using it for bottom feeding. That's exactly the way that I do it as well since it's easier that way.

Anyways, will be VERY interested when your ready to sell these. Honestly, you got a big hit on your hands right now.

 

[pebo88]

Id like to go on the waiting list for one of these! Im only getting 1-2 weeks out of my 2.5 ohm atty's at 4.8v. Im thinking my AW IMR's are putting out volts too quickly and popping my atties. They always seem to go right when I fire the button and never in the middle or end of a draw. Anyone care to comment?

Im ordering some aw protected 750mah and some trustfires to see if this will remedy the situation.

 

[ukeman]

Id like to go on the waiting list for one of these! Im only getting 1-2 weeks out of my 2.5 ohm atty's at 4.8v. Im thinking my AW IMR's are putting out volts too quickly and popping my atties. They always seem to go right when I fire the button and never in the middle or end of a draw. Anyone care to comment?

Im ordering some aw protected 750mah and some trustfires to see if this will remedy the situation.

I find I like my SR attys (2.3 to 2.5 510/ 2.9 to 3.1 901) at 3.5 to 4.3v max when the atty starts going up in resistance ( i use a lot of VG so higher volts give a burnt taste)... and my attys last about a week to 2 weeks too... chain vaping all day long. By then they are not as nice (taste/vapor/etc) anyway.
THey just go on the first fire too... like right after a refill ! but wth.
I'd either want to clean them or toss em anyway...

 

[Taniger1]

I actually rotate through about 10 atty's. I havnt' had a problem :0). I clean them every night with just hot water, blow them out and shake them dry. Havnt' had one pop yet!

 

[jifjifjif]

Very very cool, J.

 

[ime5000]

whats the difference between v1 and v2?

 

[AaronY]

whats the difference between v1 and v2?

Different VV chips. Think V2 is cooler and last longer. Waiting for v3 myself Hopefully I can get one before next year.

 

[washvap]

Well, the V2 isn't cooler. It's limited to only 6.1V compared to 7.4V of the V1. IMO 6V is good enough. Don't need anything higher then that.

 

[ukeman]

Well, the V2 isn't cooler. It's limited to only 6.1V compared to 7.4V of the V1. IMO 6V is good enough. Don't need anything higher then that.

the V2 is "cooler" because it has the "evercool" chip in it and it doesn't get as hot as the chip in the V1.

 

[ufo]

Hi J.
As I said, I'd love to try this bottom feeder VV
I'm waiting anxiously that restart the production of your mods.
There are predictions?

 

[LadyVaper]

J, Nice "Atty" Why I have not seen this sooner, I will never know!! (Never on computer anymore)
How Much??? I should read more before I ask questions, but NO TIME!!
Are you selling these?? I LOOOOVVVEEEEE My TANK!!! I have to say I have used it
more than ALL my "ECIGS" put together!!! It is Truely my GO-TO mod.
I am sooooo glad I got one, but what is this now??? A rebuild-able atty?
When I started vaping back in April I had no idea I would be getting into it
this much. What happened to charge battery, change carto and vape? But this thing looks great and EASY!!!
Shoot me a pm J and let me know what I need to get one!!! Should I get one?
and where do I get the supplies to "rebuild" this baby? J you are great, thanks for the GREEEAAATTTT Tank!!!
Remember it may take me a day or two to see it but I will get the PM

 

[LadyVaper]

According to my experience, the best performing atomizers i tried so far are those AMG Hybrids, when they perform the way they're supposed to. I'm satisfied with them, but like i said i don't feel comfortable purchasing products from Vapage because they all share something in common: lack of QA.

I can not get my 2.5ohm Vapage <HBF> Hybrid BF to work on my VV SGT Tank. It has a rubber seal on bottom.
I don't want to burn it up but it just wont fire on my tank. Any suggestions?

 

[ukeman]

Hi J.
As I said, I'd love to try this bottom feeder VV
I'm waiting anxiously that restart the production of your mods.
There are predictions?

I would PM j as soon as possible... get on the list.

 

[ime5000]

i talked to him last night, hes not taking anymore requests for the v2 at this point, i just picked one up in the classies and am pretty excited! do the aw ic 14500 work in it? and about how long do the batterie last on a full charge?

 

[ukeman]

i talked to him last night, hes not taking anymore requests for the v2 at this point, i just picked one up in the classies and am pretty excited! do the aw ic 14500 work in it? and about how long do the batterie last on a full charge?

yep any 14500 but AW Por IMR are the best... P14500 last longer.
IMO you can get the 3ml and then some bottle of juice vaped on a charge.
It lasts longer then some high end regulated VVs with dual 16340's or as much as a 18650. One full day...?

 

[ime5000]

hey uke canyou elaborate in a pm on all those batts? the only ones i know of are the aw imr (red ones) and aw ic(black and silver)

 

[ukeman]

hey uke canyou elaborate in a pm on all those batts? the only ones i know of are the aw imr (red ones) and aw ic(black and silver)

I wasn't very clear: AW is pretty much the gold standard; P14500 is the black/red protected, and lasts longer, but is close enough in output to the red IMR hi drain 14500 which doesn't last as long.
IMR are great for very LR when you need a lot of output, but like I said, i don't notice much difference in performance.
IMO AW's are worth the slight extra cost because not only are they better, they are safer.