Introducing the AGA - Hydra and the AGA - Tiamat Rebuildable Atomizer Tanks

[gormly]

Hey all, Eric I was going to order another AGA Tiamat but I seen they are different will you or can you get old ones back in. This one is not as well made as its predecessor IMO.

Yea, not cool a customer pointed it out (lol, that's my job), they are improvements but not the improvements we were looking for. The bottom is less knurled, the manufacturer says it was requested and the oring is now on the bottom to "seal it better".

I am not ordering any more of these, the new one is the next run.

 

[tommyfinger]

Stupid question and maybe I missed it but what kind of drip tip does the AGA Tiamat use?

 

[Dragoncqb]

Most 510 drip tips fit well. But a nice 510 stainless steel drip tip looks great on the Tiamat.

 

[tommyfinger]

Most 510 drip tips fit well. But a nice 510 stainless steel drip tip looks great on the Tiamat.

Thank you!

 

[Dragoncqb]

Your welcome.

 

[Dragoncqb]

Tommyfinger this is not ecig related but I thought from your avatar you might like these.

 

[gormly]

I have order confirmation on the AGA-T in ALL stainless, caps, tube, screws, nuts, all of it and GLASS tank
It's been paid and will ship shortly.

It is a little bit different in terms of the look, the knurled edges are gone (I liked those ) and the base from what they tell me is like the latest version, slightly shorter, so it's more compact but still holds the same. The Cap is also freely positionable.

so if this is as good as it sounds we will have a real winner on our hands.
I am also getting some custom drip tips from them (first to order) that look pretty sweet for them and some spare glass tanks.

I am pretty sure the glass will fit on the current AGA-T but will not know for sure until I get it.

 

[MJBinNM]

I have order confirmation on the AGA-T in ALL stainless, caps, tube, screws, nuts, all of it and GLASS TANK
It's been paid and will ship shortly.

It is a little bit different in terms of the look, the knurled edges are gone (I liked those ) and the base from what they tell me is like the latest version, slightly shorter, so it's more compact but still holds the same. The Cap is also freely positionable.

so if this is as good as it sounds we will have a real winner on our hands.
I am also getting some custom drip tips from them (first to order) that look pretty sweet for them and some spare glass tanks.

I am pretty sure the glass will fit on the current AGA-T but will not know for sure until I get it.

Sweet! Can I get on the super secret get one first list?

 

[Big Screen D]

Sweet! Can I get on the super secret get one first list?

Get in line bub.

 

[Dragoncqb]

They sound great to me.

 

[gormly]

I have a lot coming, as many as I could afford and will back it up immediately with another order as soon as I see it.

 

[gormly]

Here is a pre-pic of some of the drip tips that will be available, will post pics of the final aga when I get them. I asked for new shots of the final product

 

[gormly]

first picture I have of the newer AGA with glass tank.

I think there is a bit of photoshopping going on here but this is what it will look like.



more manufacturer details:
1.. Remove the thread on the caps , so the user can adjust the airhole at the same line of wick easyly.
2 . All the metal parts are used stainless , including center tube , postive post ,negative post and screws So they have no defective as plated or copper .
3.. Remove the knurling on the body , so they will looks more beautiful .
4 . They support glass tank .so can have better taste and healthier.Our standard products are matching clear PV tank .
5.. The wick(Mesh) hole more close to the positive pole .so can reduce the hot spot.

 

[MJBinNM]

first picture I have of the newer AGA with glass tank.

I think there is a bit of photoshopping going on here but this is what it will look like.

View attachment 164805

more manufacturer details:
1.. Remove the thread on the caps , so the user can adjust the airhole at the same line of wick easyly.
2 . All the metal parts are used stainless , including center tube , postive post ,negative post and screws So they have no defective as plated or copper .
3.. Remove the knurling on the body , so they will looks more beautiful .
4 . They support glass tank .so can have better taste and healthier.Our standard products are matching clear PV tank .
5.. The wick(Mesh) hole more close to the positive pole .so can reduce the hot spot.

Thanks Eric...Sounds like they addressed all the biggest issues...looking forward to seeing the actual finished product.

 

[vpsi333]

was about to order an AGA-T 2-day, but i see they're out-of-stock. when do you expect the new designs to be in? Also the Vamo list as using only (1) 18350 battery is this different than the one I have now (which allows me to stack 2 18350's) or do you list it that way for safety reasons.

 

[gormly]

was about to order an AGA-T 2-day, but i see they're out-of-stock. when do you expect the new designs to be in? Also the Vamo list as using only (1) 18350 battery is this different than the one I have now (which allows me to stack 2 18350's) or do you list it that way for safety reasons.

The AGA-T is in stock, I had a website snafu, fixed now. I have 120 of them

the new design.. two week or less hopefully but I am not holding my breath, I am thinking they used my payment to get the materials...
it will be more so this one is a cheaper alternative for now and the glass tanks I am told will fit this one and I have spares coming.


Vamo.. safety reasons, the vamo can shorten by removing the middle piece so it makes itself a mini and I don't like to list stacked batteries as an option.

 

[eHuman]

The AGA-T is in stock, I had a website snafu, fixed now. I have 120 of them

the new design.. two week or less hopefully but I am not holding my breath,

Uh oh, Am I reading this right? that you have the AGA-T in stock but not the updated version? I've been waiting out to make a purchase for the new version to stock up and I just placed an order based solely on the understanding that it was the updated SS center post, o-ring cap, glass tank model etc...

Then I came here and saw this post...
Please tell me that the ones you have now are the new model? I can't afford a re-purchase later...

EDIT/UPDATE: Talked to Eric this morning and these are the old style AGA-Ts that he currently has in stock (over 100 as of this post). Grab them up now at this low price as the new version will understandably cost more when it comes in than the current sale price of the original AGA-T.
Back-ups are a good thing.

 

[gormly]

Back-ups are a good thing.

Plus the glass tanks fit the original version and I have stainless screws so almost.. almost the same

 

[gormly]

Ok so here are the first real pics of the Tiamat Plus

all parts stainless,

 

[oplholik]

Looks good and sturdy. When are you expecting to get these?