INTRODUCING - The VOLT X² - ALL NEW Batteries/Passthrough

[Uncle]

It is normal to have bad parts on production, it simply happens.
The actual percentage of it seems to be pretty low however. Only 4 people? LOL
Seems normal.

Yep . . . To Me Too . . .

Now i am thinking of sacrificing a 650 battery, what do you think?

NO ! ! ! ! You Are Just Working My Last Nerve, Especially With You Wanting to Take VERY GOOD "Stuff" Apart All The Time . . .

DID - You Always Do this as a Child Too . . . Your Parents must of REALLY "Loved" Ya' When you were a Child . . . And if You have a "Significant Other" - I REALLY hope they still do too . . .

Zeus will not be happy with you!

DITTO ^ ^ ^ ^ ^ ^ ^ What She Said - HE and the other "GODS" might just hit you with a "Lightening Bolt" to "Strike" You back into reality . . .

 

[Konstantine]

Now i just want to do this to piss you all off!
Do not worry, except the knowledge i'll use the parts to make a mod with VOLT parts..

And yes i was like that as a kid, i remember i had a room full with toys up to the knee and i dissasembled them all, i got my first electrick shock (220V) at the age of 8 lol now i can take up to 26kV (tested).
My other significant is happy because i can keep computers, mobile phones etc etc in good condition (pff they all want me for my brain
This is the only solution if i want to know what's inside and how does it work, like i did with the regular bats.
Unfortunatelly those batteries are new and none are broken due to time.

 

[Konstantine]

OK i did it.
I removed the clear press fitted plastic at the end without destroying it.
It seems it has the same ASIC controller with the older 78. A SOT23 type asic..

 

[Imagine]

As far as any defects ....they were from the first run of the product so any feed back we are getting will be carefully looked over and made sure not to happen in the future to the best of our ability

 

[txtumbleweed]

Can someone measure a 650 and a 1300 tip to tip in inches for me? I just got a 650 today and it is almost exactly the same length as my echo 1300. I expected it to be longer because of the pass through but not this long. I'm wondering if perhaps they sent me a 900 by mistake. If this truly is a 650 I can only imagine how long the 1300 must be.
Thanks

 

[stalebird]

Emailed SI this morning about my battery issue. Already have the usps tracking number for the replacement. Once again, top notch customer service.

 

[Snowylady]

HELP for a 1 month newbie , my clearomizers came today, I have a bottle of ry4 unopened, now what exactly do I do? Thanks

 

[Imagine]

* To fill simply unscrew the specially designed leak proof black tip , then tilt the VOLT X2 Clearomizer to one side and take your nicquid bottle and drip down the side of the cylinder until full, then replace the tip back in and screw till tightly sealed. Make sure the wicks at the top get saturated by holding the ecig upside down or laying it on it's side for a few min, then you are ready to vape!
* Try not to get nicquid in the center post as this will prevent proper airflow (if some does get inside simply blow through it to remove the nicquid).
*DO NOT fill above the 1.6ml line as this can lead to overfill and poor vapor production.

HELP for a 1 month newbie , my clearomizers came today, I have a bottle of ry4 unopened, now what exactly do I do? Thanks

 

[Snowylady]

Thank you! Tomorrow is 5 weeks for me since my last cigarette and I found SI. A great way to go.

 

[Imagine]

congrats!!

Thank you! Tomorrow is 5 weeks for me since my last cigarette and I found SI. A great way to go.

 

[ThreadKiller]

congrats!!

What she said!

 

[starsong]

Can someone measure a 650 and a 1300 tip to tip in inches for me? I just got a 650 today and it is almost exactly the same length as my echo 1300. I expected it to be longer because of the pass through but not this long. I'm wondering if perhaps they sent me a 900 by mistake. If this truly is a 650 I can only imagine how long the 1300 must be.
Thanks

Diameter 14mm (the regular volt batt is 9.2mm) Length of the tubes are 72mm (650 mAh) 87mm (900 mAh) and 97mm (1300mAh) - that is just the tube and not the end cap or the button and connections.
and a picture
http://www.e-cigarette-forum.com/fo...-new-batteries-passthrough-9.html#post5675849

 

[ThreadKiller]

I miss my X2. I shamelessly mailed support to ask if they'd send my replacement X2 with my new order (which has a second X2 and shipped out today), but policy forbids it. I HATE policy. GRrrrrrrrrrrrrrrrrrrrrrrrrrrr.

Then USPS says that my shipment is due to arrive on Saturday. They lie. They are always at least a day late, which means my stuff won't get here til Monday. A whole weekend without my X2.

Well, I'm not done feeling sorry for myself yet, but that's a good start.

 

[Charlz]

Can someone measure a 650 and a 1300 tip to tip in inches for me?
Thanks

Diameter 14mm (the regular volt batt is 9.2mm) Length of the tubes are 72mm (650 mAh) 87mm (900 mAh) and 97mm (1300mAh) - that is just the tube and not the end cap or the button and connections.
and a picture
http://www.e-cigarette-forum.com/fo...-new-batteries-passthrough-9.html#post5675849

I believe he's looking for the entire length in inches, not just the tube in mms- which still isn't actually giving anyone the entire length of the battery. I can see not adding the threads to the measurements because they don't add length when the clear cartos are attached. But they still contribute to total length with a standard volt carto attached.
And the button or band at the top and the end cap still are part of the total length. It's like me saying my foot is 10 inches without my toes.

 

[Poppie]

Well, I'm not done feeling sorry for myself yet, but that's a good start.

 

[ThreadKiller]

Exactly! Thank you for understanding.

 

[Poppie]

I truly do!

Exactly! Thank you for understanding.

 

[kia2]

Thank you! Tomorrow is 5 weeks for me since my last cigarette and I found SI. A great way to go.

Welcome to our midsts, Snowylady, and congratulations on 5 weeks smoke free!!!

 

[kia2]

Well, I'm not done feeling sorry for myself yet, but that's a good start.

awwwww.

/hug

 

[txtumbleweed]

I believe he's looking for the entire length in inches, not just the tube in mms- which still isn't actually giving anyone the entire length of the battery. I can see not adding the threads to the measurements because they don't add length when the clear cartos are attached. But they still contribute to total length with a standard volt carto attached.
And the button or band at the top and the end cap still are part of the total length. It's like me saying my foot is 10 inches without my toes.

Yes that is what I'm trying to find out. The one that I got is a 650 and is 3 5/8 inch long and my echo 650 is 2 5/8" and what I'm wondering is if perhaps I got a 900 mah by mistake.