Ipv4 upgrade available

[thomas l]

keep getting device not found any ideas thanks

 

[Retro138]

I have to go to a friends house that has a pc, because I can't update on a Mac.

 

[ka724ka]

keep getting device not found any ideas thanks

try different usb port or reinstall the driver first. also, make sure your device is off and take out the batteries before connceting to PC.

 

[speedemon]

You need a micro USB cable to connect the IPV4 to your computer. Here are the update instructions posted on Reddit-
1. Download the SXi update package here New SXi upgrate package_product upgrate_Download_IPV Electronic Cigarette -

2. Download the IPV4 Update here ipv4 upgrade software for 120w with Ti wire 100J test_product upgrate_Download_IPV Electronic Cigarette -

3. Install the SXi Program

4. Open said program

5. Turn off your IPV4, remove the batteries, and plug in the USB cord

6. Click the connection icon

7. Click install driver.

8. Install the driver for the IPV4 (should be the only option)

9. Close out of the driver pop up

10.Click connect

11.Click return (the icon at the top center of the window

12.Click open file

13.Browse to and open the IPV4 update package

14.Click Upgrade

Thanks highplains these step by step directions are great finaly got it to work now ti settings and 120wKeep this post going much needed help for us!

 

[thomas l]

thanks tried that even tried different usb cable uninstalled everything and reinstalled

 

[thomas l]

try different usb port or reinstall the driver first. also, make sure your device is off and take out the batteries before connceting to PC.

thanks got it put it different laptop it's weird was useing same one i use for Ipv3

 

[MegaVap]

What's the highest Joules you can go up to in Ni200 mode? I don't own one..just wondering..

 

[vaperXant]

What's the highest Joules you can go up to in Ni200 mode? I don't own one..just wondering..

50J was the last update, I don't think that has changed in the IPV4

 

[Nibiru2012]

Followed the instruction exactly as listed and update went without a single hitch.
Verified firmware via holding power button down while inserting 2nd battery to show the firmware version on the iPV4's screen.

Now time to order some Ti 1 wire!

 

[HighPlains]

keep getting device not found any ideas thanks

Same thing happened to me on several different computers. It was not detecting my device even though the IPV4 was connected with a USB cable. Finally I searched Windows help. Went into Control Panel settings-> Hardware and Sound-> Devices and Printers-> Add a device. Once the laptop recognized the IPV4 device I could install the USB driver and perform the firmware upgrade. Good luck!

 

[Shaun Mac Wolber]

Downloaded the driver and it states fatal Driver Error. Windows 7 is program I'm using. I followed the steps as given for update and keep getting same error. ?


Sent from my iPhone using Tapatalk

 

[Shaun Mac Wolber]

Does windows 7 ultimate work? It says window 7, 8.something and so on.

But does window 7 (ultimate) work.

The only other thing can think of. Is that same as widows 7.


Sent from my iPhone using Tapatalk

 

[peterforpats]

yes, windows 7(ultimate) will work.

 

[Shaun Mac Wolber]

yes, windows 7(ultimate) will work.

Cool, will try again. I used wire that came with IPv4 was saying it was connected into usb, went into computer settings made sure added device. Plugged in with no batteries. Hit down load. It Starts loading but comes up with error. I going to try again in a.m. Thxs. I drive a truck for a living and use app on phone to send this, so not computer friendly.

Driver on the update won't install


Sent from my iPhone using Tapatalk

 

[Shaun Mac Wolber]

Driver will not install any suggestions?


Sent from my iPhone using Tapatalk

 

[AtmizrOpin]

Did the upgrade a few hours ago, well, had my friends autistic nephew do it for me, took him 5 minutes to do it. Super bright 12 year old. Anyways mine goes up to 120 watts and joules. Does your guy's do to? Vapes great with my double twisted Ti 24 gauge parallel build at 105 joules 450°F.

 

[Shaun Mac Wolber]

Thanks inswva! I still had trouble with the driver, had to choose to extract the files and point windows to them in the yihi program files directory. This seems to be a pretty rough cut, My .17 dual coil Ti build was burning @ 420f and 75J, feels better at 50J and 350f (it's way hotter than that if the Ni temps are to be believed). Still the most satisfying TC build yet for me. Probably just need more wraps for that extra power!

How do u extract file and point at a directory. I been trying to download since this post started. I followed everything exact. I under stood everything on thread to a (T) except this post pointing windows at direction. (Dont get it) So this must be why I'm downloading and keeps giving me a error.

I can recite the steps word for word, how to update.

But how do put windows in the yihi!!!

(1) I got windows7ultimate its compatible from what I been told. 2) wire that came with IPv4. It shows on screen its connected into usb. 3) I added device in setting to my computer. 4) batteries out. 5) Start to download driver it looks like it's working then says error 6) I have both files to download p4u website everything...)

Maybe I'll have one of my nephews that are in middle school do it, lol. (Not that they vape.)I don't want to go to my vape shop and have them do it.


Sent from my iPhone using Tapatalk

 

[Thor Cloudchaser]

Got it working, loving the new TC settings. Running .5mm Ti1 twisted, dual coil, 4 wraps w/ 2.5mm ID at 100J and 375F. Kicking ... and taking names!

 

[vaperXant]

Has anyone else noticed in the settings section of the SXi application it has a voltage, wattage slider and ohms reading/ Whats that for?

 

[J-Red045]

Does anyone know if they lowered the lowest resistance too? Im hoping for .08 instead of .1.

Edit:
Nope it sure doesn't.....