iTaste MVP 2.0 Whats the best setup????

[SoundFX97]

I've had my MVP2 for about 3 week and found that rebuild EVODs at 1.2 to 1.6 ohms with cotton wicks work as well as my iclear30s. An added bonus with the EVODs is they use about half the liquid since they are single coil.

 

[Dconnor]

I've had my MVP2 for about 3 week and found that rebuild EVODs at 1.2 to 1.6 ohms with cotton wicks work as well as my iclear30s. An added bonus with the EVODs is they use about half the liquid since they are single coil.

Same here. When I first got it, I was using mostly the Protank, but I drilled out 2 holes on the Evods, am using similar coil/wick set up as you, and it is the best I have. On the go, the form size is prettyhard to beat. Love the black Evod and black MVP as below

 

[SoundFX97]

I've had my MVP2 for about 3 week and found that rebuild EVODs at 1.2 to 1.6 ohms with cotton wicks work as well as my iclear30s. An added bonus with the EVODs is they use about half the liquid since they are single coil.

Same here. When I first got it, I was using mostly the Protank, but I drilled out 2 holes on the Evods, am using similar coil/wick set up as you, and it is the best I have. On the go, the form size is prettyhard to beat. Love the black Evod and black MVP as below

View attachment 264123

I've got an array of colors that look great with my black MVP. I'm keen to the crimson red one though.

Did you drill out the two original holes or add two more? What size hole did drill to? Mine have a pretty good draw for me but I'm curious what's working for you.

I'm glad that I'm not the only one who enjoys this type of set up. Are you/ have you tried micro coils with the EVOD? I use them and they are significantly better then standard coils.

 

[Dconnor]

I've got an array of colors that look great with my black MVP. I'm keen to the crimson red one though.

Did you drill out the two original holes or add two more? What size hole did drill to? Mine have a pretty good draw for me but I'm curious what's working for you.

I'm glad that I'm not the only one who enjoys this type of set up. Are you/ have you tried micro coils with the EVOD? I use them and they are significantly better then standard coils.

I need more colors. All I have is the silver and black ones. I use a 1.5-1.7 Ohm microcoil with cotton as my wicks. I drilled out two of the original holes to 1/16". Started with one hole, and wanted a little more volume of air, so drilled the second. That has worked fine. I vape a lot of sweet, darker juices and it felt like I was causing leaks by sucking too hard to draw on them. This set up as been working great for me. No leaks, tons of flavor, and big clouds of vapor.

 

[Baycitypuff]

This is my next purchase. If like to buy it locally but can't get an answer on availability/price from my local vape shop. Oh well.


Sent from my iPhone using Tapatalk - now Free

 

[Baycitypuff]

The pic with the evod tank atop the itaste put me over the edge. Purchased. $47. Whoop!


Sent from my iPhone using Tapatalk - now Free

 

[StarsAndBars]

Try the Igo-L. It was my first, and worked on the MVP really well.

^ What he said. It will take a little time to get used to an RDA, but it's not bad. Honestly I switched to one because of the difference in size. I always enjoyed the performance of the Iclears, just thought they were a tad too tall. An RDA will perform as well as you build it.

Just MHO but if I had it to do over, I'd go directly into micro coils using cotton wicks and 28 gauge wire. I'm finally starting to see why this setup is so well liked.

 

[GetVaked]

I am using a T3S with great success.

Planning on picking up a black "mini RDA", as I like the thumb screws and small form factor.

 

[suspectK]

First agi without tank for RDA function, second vision aurora bft, third odyssey carto tank from totally wicked.

It said it wouldn't post three pictures on phone app..checked here and was three...