Its woodvil time

[nerak]

Okay so how do I do this mod? I mean just drill out the snap tip so the hose will fit through? Or do you just cut it. Looks like a great way to do it instead of the screw top. Oh and I have been meaning to ask, what is the little reducer piece? I mean it's included in the little package from Rob but I have never used it. Thanks for info

Lots to learn still,but I sure am having fun doing it.

From redeyedancer:

This should solve any o ring problems you having . Use a 11/64 drill bit to drill out the dripper nipple cut about 1/8 off of the tip slip your tube through . No gaskets needed

The little reducer tube is used to slow the flow of juice down. It is used for issues of self-feeding or if you use a high PG content juice.

With regular atomizers and cartomizers some people would need to use the tubing to stop from squonking too much juice into the atty.

If you live in or visit a hot climate your REO might self-feed.

Reducer tube inserted. Do NOT push it all the way into the tubing.

 

[MamaTried]

From redeyedancer:

The little reducer tube is used to slow the flow of juice down. It is used for issues of self-feeding or if you use a high PG content juice.

With regular atomizers and cartomizers some people would need to use the tubing to stop from squonking too much juice into the atty.

If you live in or visit a hot climate your REO might self-feed.

Reducer tube inserted. Do NOT push it all the way into the tubing.

Karen, why didn't you also refer her to the definitive thread?
http://www.e-cigarette-forum.com/forum/reos-mods/521257-just-did-bottle-mod-2.html

 

[nerak]

Karen, why didn't you also refer her to the definitive thread?
http://www.e-cigarette-forum.com/forum/reos-mods/521257-just-did-bottle-mod-2.html

Ummm.....I didn't save the link! But now I did! Thank you Dennis.

 

[debinnv]

Oh goodness thank you so much for posting all that for me. When I did a ECF search for REO Bottle Mod I did not see anything. Again, much appreciated Karen, ty.

 

[MamaTried]

Oh goodness thank you so much for posting all that for me. When I did a ECF search for REO Bottle Mod I did not see anything. Again, much appreciated Karen, ty.

hehehe... if you are thanking Karen then cool. if you are thanking me for the link i posted, you might wanna hang on a bit before thanking...

 

[rudy4653]

Thanks for all the info everyone. It all makes sense. Now I have something to tinker with! I have the perfect mod, the perfect atty, the perfect coil combo, so I was running out of things to tinker with!

 

[thinkingaboutit]

Gil/unsure...

That is simply fantastic.

Alternative reply:
Eh...it's ok, if you are into that...I'm really not. I guess if you change your mind like you should I would consider a trade with you.

 

[jburbs38]

I emailed Brian at Drip Tip Designz to inquire if he had some Zebra wood to make me a couple of drip tips for my Zebra woodvill's. He told me he had none in stock. He said he could look for an order some but it may take 2 weeks before he could ship them to me. Well, three days later these are on the way to me.

So anyone with a Zebra Woodvill or anyone who likes these for that matter shoot him an email, because I know he has the wood now.

 

[oldbroad]

Thank you Rob!! Now the VV Gepetto that was promised as a gift to Lisa & Wayne's collection (which I been hiding from DW and sneaking hit off of) can finally be sent to them after the Nebula arrives. good thing DW doesn't visit the ECF

[URL=http://s299.photobucket.com/user/redeyedancer/media/001_zps36a4f469.jpg.html][/URL]
[URL=http://s299.photobucket.com/user/redeyedancer/media/002_zps440751f1.jpg.html][/URL]

[URL=http://s299.photobucket.com/user/redeyedancer/media/003_zps3da4aee3.jpg.html][/URL]
[URL=http://s299.photobucket.com/user/redeyedancer/media/007_zps2acfbb59.jpg.html][/URL]

Gil...that sure is beeuteeful!!!

 

[oldbroad]

I emailed Brian at Drip Tip Designz to inquire if he had some Zebra wood to make me a couple of drip tips for my Zebra woodvill's. He told me he had none in stock. He said he could look for an order some but it may take 2 weeks before he could ship them to me. Well, three days later these are on the way to me.

So anyone with a Zebra Woodvill or anyone who likes these for that matter shoot him an email, because I know he has the wood now.

Dang! thanks a lot!Now I have a new obsession to go with the wood one!

I'm shootin over there right now...

 

[unsure]

Gil...that sure is beeuteeful!!!

Thank you Kay Rob gets all the credit. He can sure bring out the beautiful in any kind of wood.

]

 

[Un5tab1e]

I emailed Brian at Drip Tip Designz to inquire if he had some Zebra wood to make me a couple of drip tips for my Zebra woodvill's. He told me he had none in stock. He said he could look for an order some but it may take 2 weeks before he could ship them to me. Well, three days later these are on the way to me.

So anyone with a Zebra Woodvill or anyone who likes these for that matter shoot him an email, because I know he has the wood now.

I second this. Just talked to Brian myself and have tips being made for my woodies.

Sent from my HTC6500LVW using Tapatalk

 

[MasterofNone]

hehehe... if you are thanking Karen then cool. if you are thanking me for the link i posted, you might wanna hang on a bit before thanking...

Dangit, sleeping late caused a missed opportunity here! Lol


Sent from my iPhone using Tapatalk

 

[rabernet]

Here's a tip I commissioned for my purpleheart/birdseye 18490! If anyone else thinks they might like one like this, I know they have enough left to make one more!

Striped Purple Heart and Maple 1 11/16" tall




And a video... because they're fun. The lighting yellowed it. Sheesh.

 

[glassgal]

That's beautiful!

 

[Un5tab1e]

Wow Brian is fast... Here is what he has coming my way.

Sent from my HTC6500LVW using Tapatalk

 

[jburbs38]

Wow Brian is fast... Here is what he has coming my way.

Sent from my HTC6500LVW using Tapatalk

Wow! What was that like 3 hours since you called him? Customer service to match Rob's!

 

[Un5tab1e]

I emailed him at 12:10pm and we exchanged a couple of emails so he could get an idea of what I wanted. At 5:18pm I was emailed with pics of the finished product. I did commend him on excellent customer service especially considering it was a Sunday. His reply was " Thanks Greg. I try to help customers as fast as possible because I know I myself hate waiting for answers or products." he's good people in my book.

Sent from my HTC6500LVW using Tapatalk

 

[MasterofNone]

Molehill mountain drip tips is also fantastic with great customer service... Here are the two I've had commissioned to my exact specifications

Madrona

And blood wood

Sent from my iPhone using Tapatalk

 

[MasterofNone]

They are also offer a stainless steel interior now as well... I just don't like the taste of cold hard steel


Sent from my iPhone using Tapatalk