Joyetech Cuboid 150 watt
- Thread starter Btsmokincat
- Start date
- th_trl_thread_readers 0
- Status
Removed day 1. If I would of known how easy the underlying plastic mars, would have kept it on longer
Sent with Tapatalk
I've had my Cuboid since 1/16, no complaints. No button rattle, battery door issues, etc.
Another cuboid user that has had zero issues loving this mod and despite tcr's being off for 430ss it's been flawless. Saw another user had issues with the cuboid and bellus tank which I'll find out about soon as I have a bellus on the way but so far it's worked great with lemo v1, billow v2, subtank v1, subtank plus and clone crius v3 tanks all have been perfectly stable in temp mode. Used mine quite heavily and so far the finish is holding up and taking the price into account not sure what more I expect from it, alongside my rx200 and ml class this more then deserves it's place in my rotation.
This is an excellent TC Mod, It even can fireup my ViciousAnt Goliath quad coil dripper with TC at 230c, for tank that I've use on it with no issues are UD Goliath(RTA), UD Bellus(RTA), Smok TFV4((RTA)Flavour a bit muted), All Subtank's(RTA), Uwell Crown(RTA), Dark Hourse(RDA) and the best of all are, Geek Vape Griffin(RTA) and ViciousAnt Goliath(RDA).
This is a recommended vaping device with an excellent pricing
This is a recommended vaping device with an excellent pricing
I just updated my Cuboid to FW 3.01 from 3.00. Could someone point me to the page in this thread that talks about that update, I went back to page 37 in this thread and see no mention (I was under the impression that it is a relatively new update that still keeps the output at 150, I don't need 200 ?)
You could probably find what you are looking for by going to top right of page and using the search box. be sure to check the box to search this thread only in the drop down box
.
.
Thanks Tpat, I'm searching for you tube vid's right now to see if I can find anything on it that way.
Page 2 ?? I read this whole thread, I mean since the Cuboid came out so it's been a while, guess I forgot I read it. Thanks Tpat, I'll go back and re-read it again. Getting Old just Sucks, you know ?. Thanks again though.
I think that's 3.10 that page 2 is talking about, not 3.01. I think 3.01 came out along with 3.11, Joyetech update site says that 3.01 was for 150 watt and 3.11 was for 200 watts but gives no other info about the update, what else is added and how to access it. I'm coming from the stock FW 3.00 so something has to be added to the FW 3.01 that I don't already have.
Ha Ha Ha,
, ain't life Great. You aught to see all the book marks on posts that I want to have handy, I know I made a book mark on something, I just can't find it anymore.
It looks like it's just a sort of memory function that remembers different atomizers resistances so that we don't have to reset the wattage when we put different atomizers on, it is supposed to remember the settings that we had set for each tank, up to 10 different resistances, then it starts rolling over and deleting the oldest (or first) value. We will see how this works out. This feature is for the 150 watt/FW 3.01 and the 200 watt/FW 3.11 Firmware Versions. I think I have it right.
It doesn't look like anything else has been changed, just the so called "Smart Function" added.
It doesn't look like anything else has been changed, just the so called "Smart Function" added.
Last edited:
Is battery life really that bad on the Cubiod? On my Sig 150W TC using LG HG2's at 66.5W on a 26/32 .45ohm dual clapton build I get about 15 hours till the mod battery display hits 50%.
I'm using an Aromamizer with dual Clapton 28g 430ss wrapped with 34nichrome with the Cuboid TCR set up for 430 ss (138) and it is great, there must be enough ss to register for temp control because it wont go over whatever I set it to, rite now 430 degrees
but its early yet
but its early yet
How much are you hitt'in on it ?? That's some serious battery life you get off of that Sig 150 TC. Just wondering cause I can get about 50% more life out of my Cuboid that I can off of my single battery mod's, at best, and using regular Kanthal A-1. Anyways, I like my Cuboid enough that I use it all day, every day with my Lemo V1's, V2's, Taifun GT-2-S, Hurricane, UberToot V2 (all clones, I ain't that rich, except for the Lemo's) and like it very much. It may not be a World Beater, but it keeps me off of the smoke's, and that's all I care about.
I just got my Cuboid. I also have a number of evic minis. I go by how much juice I can vape from a charge. Seems to me that I am getting about 50% more juice from the Cuboid than the mini. I only vape 15-18watts using about a 1-1.1ohm coil. I don't use TC either. I am using Samsung 30Q batteries in both of them. I expected more from the Cuboid but I like it. Feels good in the hand even if it is a bit heavy.
I like using silicone sleeves on everything but the sleeves for the cuboid that I have go on over the top and end up sliding up unless you have an iron grip on them. Don't like that part. Need to find a sleeve that goes on from the bottom. For the moment, I cut up the one I have so I can put it on from the bottom and still get the batteries out without removing it. Looks like crap but works. Does anyone have a sleeve that goes on from the bottom?
I like using silicone sleeves on everything but the sleeves for the cuboid that I have go on over the top and end up sliding up unless you have an iron grip on them. Don't like that part. Need to find a sleeve that goes on from the bottom. For the moment, I cut up the one I have so I can put it on from the bottom and still get the batteries out without removing it. Looks like crap but works. Does anyone have a sleeve that goes on from the bottom?
- Status
