Joyetech Cuboid 150 watt

[2legsshrt]

Here's some good info on 510 length's of different devices you might be interested in seeing: 510 Connectors Length

I looked at that and changed my mind I'm getting 2 of them. My STM's should fit just fine and the Griffin 25's I'm planning on getting won't but 1 of my vinyl washers will work. They are .5mm thick and the Griffins 510 measures 5.02mm the Cuboid measures 4.8mm so that will do the trick. I now know the TCR to use to get accurate readings on it for 316L SS Daniel said if you use 108 instead of 92 like an accurate mod it makes it accurate in TC. I just wrapped my first SS coil and I'm sold. Tried it on my VTC mini with TCR at 108 420F and I think the watts were on 40 that doesn't make any diff as long as its high enough worked great so I know it won't knock me out of TC on the Cuboid either. But I should e able to blow some huge clouds when I want to with that Griffin with dual SS on Power mode. I've never really tried that but it looks like fun occasionally.

 

[2legsshrt]

I agree.... I'd pay an extra couple of dollars for a good 510 connection, as opposed to being forced to use washers/spacers/510 heat sinks just to get certain attys to work!

I have an RX200, I WAS thinking about selling it and getting the RX200s, and I still may, but I'm also getting rid of the Gemini 22mm RTA, since it's really no better than the Griffin, and I have three of them....

Worse yet, it appears the new smok Quantum 80W TC is using a Joyetech like 510, aka stiff and shallow!!!!

Seems like a nice mod otherwise... I'm also wondering about the NEW Wismec/Jaybo/Twisted420 RX75.... same old 510???? No, not a DNA, still same Joyetech chip, but quite a unique design, with a flap/cover hinged over the screen.....

Before you get that 200S check the 510 depth it's less then the 200 or the VTC

 

[2legsshrt]

Before you get that 200S check the 510 depth it's less then the 200 or the VTC

Now I'me interested in that H Cigar VT75 DNA

 

[2legsshrt]

Oh, nothing secret... Jaybo and Twisted420 made a video...

Is that a Theorem tank on there.

 

[Major911]

Now I'me interested in that H Cigar VT75 DNA

I like the looks of that mod as well but as much as I've been a fan of evolve boards in the past I refuse to buy a DNA anything until they come out with a Mac version of the Escribe software.

 

[2legsshrt]

You Mac guys LMAO.

 

[Tpat591]

Now I'me interested in that H Cigar VT75 DNA

Figured you would have been into the sdna75 as it is about the size of a VTC Mini

 

[2legsshrt]

I am wonder if Daniel got her tuned right. Really wouldn't need to mess with escribe.

 

[Tpat591]

I am wonder if Daniel got her tuned right. Really wouldn't need to mess with escribe.

Wouldn't NEED to, but it is kinda cool and interesting.

 

[2legsshrt]

IDK though I just am kinda wary about EVOLVE products. but I like the looks. It's alot smaller then the H Cigar one. Yeah it's got lots of presets if they are set right. I think it has like 5 Nickel ones which I don't really think there are that many nickel users out there.

 

[GeorgeS]

You Mac guys LMAO.

Thankfully Winderz is not the only game in town. While they have very little of the market, there are those of us who have them and resent having software released for our devices that is MiniSquish Winderz only.

 

[Tpat591]

IDK though I just am kinda wary about EVOLVE products. but I like the looks. It's alot smaller then the H Cigar one. Yeah it's got lots of presets if they are set right. I think it has like 5 Nickel ones which I don't really think there are that many nickel users out there.

Really, considering they are the only ones who warranty their products for one year and actually fix devices made by Chinese companies (that will not support you) that contain their products for that same period, I find that surprising. Figured you would be all over that.

Think the nickel presets are to set up like that to show newer vapers the versatility of using presets in Escibe with the material that is most widely available in premanufactured coils which they are most likely to start with and how to set it up for other materials more so than for actual permanent use. Any of those can easily be modified and customized in the program and by examining what has changed within the presets within the program you can learn it much more quickly and think that is the point.

While I am truly digging my new Egrip II w/ the TFTA system Cubis uses now that I found an effective anti-spitback drip tip, I have no illusion that if it screws up in six months I will be able to send it back to JT and have them fix it free of charge.

To All: I am Sorry for the off topic posts in reply to a previous discussion. Please continue with your regularly scheduled program.

 

[2legsshrt]

Figured you would have been into the sdna75 as it is about the size of a VTC Mini

Only thing about that is it only puts out a max of 6v

 

[2legsshrt]

Figured you would have been into the sdna75 as it is about the size of a VTC Mini

You could get 75w at a little below .5 ohms and most of my builds are like that even SS you'd barely get 20w if you had a Kanthal Nautilus with a 1.8

 

[2legsshrt]

I like the looks of that mod as well but as much as I've been a fan of evolve boards in the past I refuse to buy a DNA anything until they come out with a Mac version of the Escribe software.

Yeah I watched a review on it by Suck my mod and the battery cover keeps coming off. I think the SMY SDNA75 looks better even though it only has a max output of 6v if you are running a TC coil your ohms should be plenty low enough to get full power which you will not need. The highest res coil I have at present is a .45 SS my Ti coils run .29 and if you are running dual coils it will be half of that but as long as you are under .5 you'll get max power if you want it. I really like the looks of the Lost Vapes Triade DNA200 with the leather not in stock yet but should be shortly $159. Very similar to the Reuleaux but a really nice 510 connection and leather. Check it out at Element Vapes

 

[2legsshrt]

I think if I get a DNA it would be the SMY. I do like the Cool Vape 4 TC18650 but you either have to buy it with a tank or the full kit with a case a single battery case with a battery checker all totally unneeded unless you are a brand new vaper and no upgradability. I think it will cost about the same as the SDNA75

 

[Evi|grin]

Just picked one of these up locally for only $35 and updated to the 3.13 firmware.

The 510 is slightly better fitting than my VT Mini. It appears to work just fine in 316 TC mode and power mode. Seems like a great mod for only $35.

 

[t8kiteasy]

Just picked one of these up locally for only $35 and updated to the 3.13 firmware.

The 510 is slightly better fitting than my VT Mini. It appears to work just fine in 316 TC mode and power mode. Seems like a great mod for only $35.

Yes it is that is why I got three in all three colors. They do perform extremely well for the price point you can't beat it except maybe with RX200 ,I have three of them too.

 

[Paul O'Brien]

Hi just picked up one of these used and having issues with resisatnce readings .
All my tank reading higher than on any other mod by 10-15%
My nautilius mini with 1.8 coils reads 2.06
My Trition 2 with 1.8 coils reads 2.10
My Kayfun mini v3 with 1.65 coild reads 1.85
My bachelor nano with 0.5 coils reads 0.6
My other mods are 2x istick picos

I have loaded different firmware 3.03 3.10 3.11 3.13 and still the same

How will this affect my vaping , as mainly MTL high ohms at 7-8 watts ?
Do I just need to adjust to bring down th voltage a little ?

Should I just try get my money back as this could be a sign of futher failure ?

Any freedback would be most welcome

 

[t8kiteasy]

Are you using adjustable 510's on the attys your using???

If so,tighten up the 510 on the atty as far up as possible but able to make a firm connection.

What kind of wire are you using kanthal does fluctuate in resistance so does SS wire. Last try using a small flat screwdriver to lift the spring loaded 510 just a bit. Be gentle when lifting the pin all the way around you do not want to break it.