JOYETECH ERoll

[Kewldood]

The UCan is just too cool to resist, and so finally I've decided to get it soon as somebody puts it on sale. That way I can hopefully get 2@ $10 instead of one for $15. Bummer I didn't see the healthcabin sale on time seems they have a good juice selection as well. Any recommendations on which of their juice brands is good? Im sceptical of their quality bc the prices are so low...

I just got my stainless eroll in the mail looks nice with black tank, but ultimately feel black or white would be the 'nicest' of the lot. I love my stainless ego's look, but this one seemed a bit off maybe bc of the gold trim. Oh and you WOW I had forgotten how well this hits with a new atty!!

Finally, I was thinking about the random fire issue & wonder would it happen if the air- hole on the side was facing the inside of the pcc? The atty won't fire without air, right?

Anyways Merry Xmas to all -kewldoud


Sent from my Xoom using Tapatalk 2

 

[volume control]

The UCan is just too cool to resist, and so finally I've decided to get it soon as somebody puts it on sale. That way I can hopefully get 2@ $10 instead of one for $15. Bummer I didn't see the healthcabin sale on time seems they have a good juice selection as well. Any recommendations on which of their juice brands is good? Im sceptical of their quality bc the prices are so low...

I just got my stainless eroll in the mail looks nice with black tank, but ultimately feel black or white would be the 'nicest' of the lot. I love my stainless ego's look, but this one seemed a bit off maybe bc of the gold trim. Oh and you WOW I had forgotten how well this hits with a new atty!!

Finally, I was thinking about the random fire issue & wonder would it happen if the air- hole on the side was facing the inside of the pcc? The atty won't fire without air, right?

Anyways Merry Xmas to all -kewldoud


Sent from my Xoom using Tapatalk 2

There is an air hole on the tip that causes it to fire, the one on the side is the wicking hole for the atty.

Its not air that makes it fire in the PCC though

 

[JudeD]

I mainly use the Ucan to refill, but sometimes I want to use a flavor for just one tankful and I don't want to fill my Ucan with that flavor. I have syringes, but basically I'm lazy about using them if I don't have to. I was leery about pulling the cap off the eRoll tank to fill it because I had the 510-T tanks that were similar to this and it was so hard to get the cap off and then it was supposed to stay attached on one side and I broke so many of them all the way off. But the eRoll cap comes off pretty easily and comes all the way off so I can take them off, fill the tank and pop it right back on. I still prefer to fill with the Ucan, but for those times when I want a flavor that isn't in my Ucan, it's not a problem to open the tank to fill.

 

[four2109]

Can someone please answer a couple of Ucan questions?
How big is the Ucan?
How much liquid does it hold?
I use 3ml needle bottles that work fine. I keep seeing the ucan but the vendors just show stock photos and no size comparison with anything, or details.

 

[TennDave]

Not sure of exact dimensions but it is rather heavy for it's size- maybe 2 inches tall and an inch across ? It holds 10 ml

 

[souvik]

Then I learned the secret!

If I dripped those tiny drops on the edge of the tank hole, rather than aiming for the middle, it worked!
So while filling these tanks became easy for me, I was resigned to the idea of only using these two flavors when using my eRoll.

Hi DC2...dunno how you stumbled upon this secret , but I have to admit it's an ingenious observation...I would have never believed you till I tried it myself....this opens up a whole new dimension to tank filling, without taking off the caps....way to go buddy, and thanks

 

[Faylool]

Well I have decided to fill the " tank" through the hole of the mouth piece. So far it's fine, I don't wear out the plastic atty hole area taking on and off. Haven't noticed any difference except the first couple draws are a little tiny gurgle. It seems to go around the sides of the inner cap. Now I am trying the plastic cap that came with the mouthpiece so the juice stays fresh and in the tank but so far I keep using it mostly up going out and about. When they get dirty looking I dismantle and wash. And I TRY not to clamp down with my teeth on the mouth pece. For me this a bit like regressing because I chewed Nicorette for 10 years. This is seriously close to a cigarette experience but much better flavor and taste of course

 

[tapout1003]

Bad news..... one of the batteries from my replacement kit started firing in the PCC. Not sure what direction to go in next.

 

[Faylool]

Bad news..... one of the batteries from my replacement kit started firing in the PCC. Not sure what direction to go in next.

That happened to me but it was in my hand. I took and twisted the tank cover and it quit. I believe the tank cover needs to be on all the way not half way but I really don't know for sure. Maybe it twisted some when to popped it in? I know it's kind of expensive to not be sure so if you decide to exchange it please let us know what they knew about that happening. If mine does it again all be contacting the store but so far, no repeats

 

[four2109]

Not sure of exact dimensions but it is rather heavy for it's size- maybe 2 inches tall and an inch across ? It holds 10 ml

Just what I needed to know. I don't need one. Thanks for the info.

 

[volume control]

Well I have decided to fill the " tank" through the hole of the mouth piece. So far it's fine, I don't wear out the plastic atty hole area taking on and off. Haven't noticed any difference except the first couple draws are a little tiny gurgle. It seems to go around the sides of the inner cap. Now I am trying the plastic cap that came with the mouthpiece so the juice stays fresh and in the tank but so far I keep using it mostly up going out and about. When they get dirty looking I dismantle and wash. And I TRY not to clamp down with my teeth on the mouth pece. For me this a bit like regressing because I chewed Nicorette for 10 years. This is seriously close to a cigarette experience but much better flavor and taste of course

Yeah i would not do that at all. The tank youre supposed to fill sits between the wick and air path which is what youre filling, the air path...

 

[Kewldood]

Can someone please answer a couple of Ucan questions?
How big is the Ucan?
How much liquid does it hold?
I use 3ml needle bottles that work fine. I keep seeing the ucan but the vendors just show stock photos and no size comparison with anything, or details.

I believe it's 6cm tall x 2cm wide. If you search on YouTube there's a couple reviews that will answer most of your Q's.

Sent from my Xoom using Tapatalk 2

 

[Angel Wings]

Bad news..... one of the batteries from my replacement kit started firing in the PCC. Not sure what direction to go in next.

mine did this also while it was in my purse. the battery was in the charge position. i have started turning the battery around when it does not need charging. since i began flipping it around after it finishes charging, no problems at all.

 

[Kewldood]

So I had a visit from the grinch who tried to steal my vaping joy...took my eRoll out of the pcc and found it was completely covered -almost dripping- with fluid!! Unsure as to whether it was condensation or juice since my priority was to clean up rather than investigate, but either way it's not good. Good news is that the leak was contained in the eRoll slot within the pcc, and I opened it to check for damage and sure enough it's shielded well enough but the board is located so close that it still could be bad news if the leak is severe enough.

I've attached a picture of the pcc guts so you can see for yourself, and btw there's no space in here for storing tanks which would be awesome but not possible without compromising the size or battery capacity of the pcc. Maybe the hinge could be modified to hold tanks in the fold...

Anyways if someone has this leak issue then (as with any electronic device) just wipe it down and don't run or charge the pcc until the liquid has dried completely.

Sent from my DROIDX using Tapatalk 2

 

[dragonbone]

So I had a visit from the grinch who tried to steal my vaping joy...took my eRoll out of the pcc and found it was completely covered -almost dripping- with fluid!! Unsure as to whether it was condensation or juice since my priority was to clean up rather than investigate, but either way it's not good. Good news is that the leak was contained in the eRoll slot within the pcc, and I opened it to check for damage and sure enough it's shielded well enough but the board is located so close that it still could be bad news if the leak is severe enough.

I've attached a picture of the pcc guts so you can see for yourself, and btw there's no space in here for storing tanks which would be awesome but not possible without compromising the size or battery capacity of the pcc. Maybe the hinge could be modified to hold tanks in the fold...

Anyways if someone has this leak issue then (as with any electronic device) just wipe it down and don't run or charge the pcc until the liquid has dried completely.

Sent from my DROIDX using Tapatalk 2

Sorry to hear about your eRoll problems. Thanks for showing us the inside though hehe.

Anyway, your ejuice sounds WAY too thin or something. It shouldn't be leaking like that. What is your VG ratio and what ejuice are you using?

 

[dirquist]

Whew, finally done with this thread. Ordered my emini about halfway through. Some of the auto fire problems sound worrisome. Also it shouldn't matter how thick the juice is for a device I own, so thats also worrisome.

Lastly, of all the places mentioned to one stop shop with the Ucan all have issues. Either the Ucan is way more than typical or some of the other parts are overpriced. Anyone know of a place where all pieces are on the lower end, ie $15 for can, $20 for atomisers, and $3 or less for the cones?

Either way, Im excited to get it. I got a little xmas money a couple days before xmas so I had time to order on the 21. It showed up in the USPS on the 23rd. It still has not left Florida for its monumental journey to South Alaska AKA Washington State. I cant wait for this thing to show up

 

[tapout1003]

At times when mine fires in the PCC the juice leaks. It seems to only happen when the unit is firing for a long period of time inside the PCC. I originally wrote it off to the tank hole being stretched out from removing it multiple times. I've swapped back to that tank and no leaks. My theory was the heat makes it really thin and it finds a spot to leak.

Just so everyone understands, this is my second Eroll kit. The first one was replaced completely by my vendor under warranty when it was firing in the PCC. Since the second one does basically the same thing I'm not going to bother the vendor for a replacement which i'm sure will malfunction.

 

[dragonbone]

Anyone know of a place where all pieces are on the lower end, ie $15 for can, $20 for atomisers, and $3 or less for the cones?

Health Cabin obviously. Although you probably want to buy locally?

 

[dirquist]

Health Cabin obviously. Although you probably want to buy locally?

Health cabin does not have any cones. If I dont find anyplace else Ill keep checking them to see if they get back in stock.

 

[dragonbone]

At times when mine fires in the PCC the juice leaks. It seems to only happen when the unit is firing for a long period of time inside the PCC. I originally wrote it off to the tank hole being stretched out from removing it multiple times. I've swapped back to that tank and no leaks. My theory was the heat makes it really thin and it finds a spot to leak.

Just so everyone understands, this is my second Eroll kit. The first one was replaced completely by my vendor under warranty when it was firing in the PCC. Since the second one does basically the same thing I'm not going to bother the vendor for a replacement which i'm sure will malfunction.

Wow, really sorry to hear about that! I don't have a single problem with mine. Dry as a bone and no misfiring at all.