JOYETECH ERoll

[Jibbu]

Whew! I read all 300 pages. If y'all get an eRoll forum maybe you could pick a couple volunteer editors to chop this up into several smaller conversations, each with its own topic. "Re-wicking the eRoll atomizer", for example, with links to *watchable* vids would be the cat's meow.

Just my two cents; the info in here is priceless, but will I come back to do an in-thread search? I don't know. I did, however, bookmark "part 2" for all the wonderful stuff at the beginning.

Many thanks to all who contributed to my ever-continuing education!

 

[Pepo]

Does anyone know if there is a 3.0 or 3.2 ohm atomizer available for the eRoll? The 2.2 ohm standard one is just a bit too harsh/hot for me, would love to get a higher resistance one for a cooler/smoother vape!

If you are handy you can make your own coil to which resistance you like.

 

[qorax]

Whew! I read all 300 pages. If y'all get an eRoll forum maybe you could pick a couple volunteer editors to chop this up into several smaller conversations, each with its own topic. "Re-wicking the eRoll atomizer", for example, with links to *watchable* vids would be the cat's meow.

Just my two cents; the info in here is priceless, but will I come back to do an in-thread search? I don't know. I did, however, bookmark "part 2" for all the wonderful stuff at the beginning.

Many thanks to all who contributed to my ever-continuing education!

^Here's another one!
Nice to know there's another person thinking alike; and that I am not the only one (voicing it a few days back).

 

[unloaded]

Genuine Joyetech eGo-C / eRoll / eCab Atomizers [Type-A] come "only" in two varieties:
a) SR (Standard Resistance), 2.2 Ohms, or
b) LR (Low Resistance), 1.8 Ohm.

CAUTION: Do Not Use LR with your eRoll batteries!

Why the Caution? I use the LR attys in my eRoll pretty much exclusively. No problems and better hit.

 

[unloaded]

Got my Hangsen juices in, got the needle tipped bottles I've been after for a while. IndyVapers has the juice, it's their Standard Mix and HS Prime lines. These make my kit perfect for all day use now. Perfect timing for warmer weather and less pockets. The RY6 is about as close to a real cigarette as you'll get, if anybody is interested.
Indy Vapor Shop Electronic Cigarette Liquid - Home

 

[qorax]

Why the Caution? I use the LR attys in my eRoll pretty much exclusively. No problems and better hit.

Wrote earlier:

eRoll Atomizers

eRoll uses the eGo-C "Type A" Atomizers, which is also used in the eCab. These come in both, Standard Resistance (2.2 Ohm) and Low Resistance (1.8 Ohm) variants. SR Atomizers typically require higher voltage... the eRoll outputs a constant 3.7 Volts, which is a high voltage w.r.t. e-Cigs.

For the benefit of a good vape and a longer life of the eRoll we must stay away from LR Atomizers. High Voltage and Low Resistance don't go together very well and can result in a short lifespan of the atomizer, flooding, inconsistent vapour and could also ruin the battery itself in the long run.

That said, using a LR Atomizer isn't dangerous on the eRoll. Just that it'd not ensure a good vape. And as we have a choice, availability in the plentiful, both r priced the same ($21 for a 5 Pack), why digress?

 

[unloaded]

Hmmm, I haven't had any of those problems. I don't think 7.5 watts are really gonna hurt anything. Probably causing more charging cycles which would shorten both battery lifespans, but that might be a push due to hitting it less.

 

[four2109]

I don't consider 3.7 volts to be "High Voltage". It's been the standard on minis. The standard was also 3.4 ohm on atomizers before the 510. It might/should drain the battery faster. I got a pack of LRs by accident, and haven't noticed any difference.
I think your warning is exaggerated.

 

[Pepo]

I don't think eRoll outputs a constant 3.7 Volts all the time because what about then when a voltage of the battery drop under 3.7v? At somewhere between 3.7 and 3.3 souds more real. I think these are regulated the same way than eg. ego-c.
And I don't either think it's a big harm when use LR-attys. When take 1.8 sec intakes with LR and 2.2 sec intakes with SR, the charge of these batteries last as long time.

 

[junkman]

Whew! I read all 300 pages. If y'all get an eRoll forum maybe you could pick a couple volunteer editors to chop this up into several smaller conversations, each with its own topic. "Re-wicking the eRoll atomizer", for example, with links to *watchable* vids would be the cat's meow.

Just my two cents; the info in here is priceless, but will I come back to do an in-thread search? I don't know. I did, however, bookmark "part 2" for all the wonderful stuff at the beginning.

Many thanks to all who contributed to my ever-continuing education!

There is already a thread for re-wicking http://www.e-cigarette-forum.com/f...discussion/384143-eroll-stainless-wicks.html

and another for accessories - http://www.e-cigarette-forum.com/forum/where-can-i-get/384137-eroll-accessories-what-where-buy.html

Problem is finding them. We need a sub forum

 

[izaidi]

So the PCC comes in White and Black. I've read the Black PCC is a fingerprint magnet. Is the White PCC any better?

Looking for more feedback please. Thanks.

 

[DC2]

So the PCC comes in White and Black. I've read the Black PCC is a fingerprint magnet. Is the White PCC any better?

I can't see any fingerprints at all on my white one.

 

[izaidi]

I can't see any fingerprints at all on my white one.

thank you very much !

 

[jingai]

I'm pretty OCD about such things and the black PCC bothers me much less than my iPhone does.

It does pick up fingerprints over time, but not as easily as my phone. It's a pretty simple matter of wiping it across my pant leg to resolve anyway

 

[izaidi]

Does anyone have any JoyeTech Liquid?

I hear the Joytech bottles have a dropper that fits right into their tank cartridges so that you dont need to use a separate needle tipped bottle.

Has anyone used JoyeTech bottle to fill a tank?

 

[GetVaked]

I have never had an issue filling the 510-T tanks with a blunt bottle.

 

[anonym9199]

There is already a thread for re-wicking [url]http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/384143-eroll-stainless-wicks.html [/URL]

and another for accessories - http://www.e-cigarette-forum.com/forum/where-can-i-get/384137-eroll-accessories-what-where-buy.html

Problem is finding them. We need a sub forum

People keep saying this over and over again, but nothing is happening, and we're stuck in a totally inaccurate subforum. What is the procedure for requesting a new subforum? Who should we ask? Can't we just bombard the moderators / administrators with requests until they get fed up of the requests and just create a new subforum?

 

[EricDykstra]

Does anyone have any JoyeTech Liquid?

I hear the Joytech bottles have a dropper that fits right into their tank cartridges so that you dont need to use a separate needle tipped bottle.

Has anyone used JoyeTech bottle to fill a tank?

Yes they work great. Most bottles have a standard open that allow you to interchange the tips. After the bottle is empty you can transfer the tip to another vendor's juice.

 

[izaidi]

Yes they work great. Most bottles have a standard open that allow you to interchange the tips. After the bottle is empty you can transfer the tip to another vendor's juice.

Sweet! Thank you so much!

 

[propagandax]

People keep saying this over and over again, but nothing is happening, and we're stuck in a totally inaccurate subforum. What is the procedure for requesting a new subforum? Who should we ask? Can't we just bombard the moderators / administrators with requests until they get fed up of the requests and just create a new subforum?

http://www.e-cigarette-forum.com/forum/showthread.php?t=398210


Sent from my Nexus 7