Just GG

[yankeebobo]

Imeo. If you need to charge a couple of euro for peace of mind, I don't have a problem with that. Typically I say if it's defective, then it should be free. But some don't have a GG base to test and will never know if some day they pick up an ody and a year later say "damn I wish I took one"
I have a slight varying degree of thread issues on my 3. So I would spend the €1-2 euro to have peace of mind.

If somebody doesn't need them, that's fine. But if someone decide later "I wish I had it because it doesn't fit" they would be sorry.

My thoughts on this. If you want exact count, run a preorder for a few days. You'll know how many want this.

 

[Aal_]

I will make some of them just for people that like it that way Guts. But first I need to make the new collector tanks.

I have to say again that the half of collector tanks have a real problem because they machined on another shop. But the other half have no problem at all. They dont fit Ody and Iatty with their native GGTS base because I made them like this to save some mm on justGG. So half of you dont have a problem with your CT.

But, I found a way to make a CT to fit Ody and Iatty with its native GGTS bases without increasing the length of it.

As for the cost of collector tanks that have a real problem and because I dont know how many have this real problem, I was thinking to charge a very small amount of money for all people, that is one euro per CT. Finally I decided to not charge anything even if half of people will have 2 working tanks like this.

Are you crazy Imeo, charge everyone 3 euros!! Everyone has paid 165 Euros minimum, I don't think they will object for 3 euros to have peace of mind!! Anyone?

EDIT: If you're saying the good ones should not screw Ody and iatty well, how do we know if we have the good ones or bad ones?

 

[Guts]

Come on guys... You already have paid for something that should work with every GG constructions... And it doesn't, it's normal for imeo to send them free. And you shouldn't feel bad about it.

 

[yankeebobo]

But Guts here's the thing. I don't know for sure if mine work 100%. I'm not going to lie. And I'll be ...... if I have an issue some day if I obtain an ody GG base again. So I will regret it.
Hence me not objecting to pay a few euro. We are not talking full retail on a ct. This is likely a little to defray cost of material.
I'm not going to say to imeo "send me 3 just I'm case mine don't work a year from now."
I spent over $600 ....I don't have a problem adding a lousy few more here to be guaranteed a fit.

Besides. I may have bigger fish to fry.

 

[Aal_]

Come on guys... You already have paid for something that should work with every GG constructions... And it doesn't, it's normal for imeo to send them free. And you shouldn't feel bad about it.

Guts you are absolutely right. But I don't mind paying this small amount to have a guaranteed fit and peace of mind. It's not our fault for sure. But it is a mistake that was done to deliver the good faster. Now we know better and Imeo knows better.

 

[Idaholandho]

I will make some of them just for people that like it that way Guts. But first I need to make the new collector tanks.

I have to say again that the half of collector tanks have a real problem because they machined on another shop. But the other half have no problem at all. They dont fit Ody and Iatty with their native GGTS base because I made them like this to save some mm on justGG. So half of you dont have a problem with your CT.

But, I found a way to make a CT to fit Ody and Iatty with its native GGTS bases without increasing the length of it.

As for the cost of collector tanks that have a real problem and because I dont know how many have this real problem, I was thinking to charge a very small amount of money for all people, that is one euro per CT. Finally I decided to not charge anything even if half of people will have 2 working tanks like this.

Imeo,
As my GG has not arrived(by choice!) I am not able to test my Ithakas or Odys and I am sure you covered this but, can you identify the batch of serial numbers that was sent to each of the machine shops to narrow your run numbers of the new base?
Much like our buddy aal, I am more than happy to pay a bit for new bases. Shipping must be covered as well.

 

[imeothanasis]

No reason for people without an Ody-native GGTS base or an Iatty-native GGTS base to ask for a new CT Yankee. They can do it only when they will need it but I doupt that they will ever need this because Iatty and Ody are out of production.

But when they will need it they can have it at any time, thats a warranty from me.


ps...... we mustnt forget that justGG works just fine with Ithaka, so no reason for panic here

 

[Aal_]

Imeo,
As my GG has not arrived(by choice!) I am not able to test my Ithakas or Odys and I am sure you covered this but, can you identify the batch of serial numbers that was sent to each of the machine shops to narrow your run numbers of the new base?
Much like our buddy aal, I am more than happy to pay a bit for new bases. Shipping must be covered as well.

Probably it is impossible to know because you wouldn't know how the assembly took place.

 

[imeothanasis]

the good ones leave 1mm gap when bad ones leave a big gap aal.

I will not charge anything even if 3 euros are a small amount of money for everyone of you. Its a very big amount for me but I will handle this cost, no problem

Are you crazy Imeo, charge everyone 3 euros!! Everyone has paid 165 Euros minimum, I don't think they will object for 3 euros to have peace of mind!! Anyone?

EDIT: If you're saying the good ones should not screw Ody and iatty well, how do we know if we have the good ones or bad ones?

 

[imeothanasis]

unfortunately not Idaho. I mixed them because I thought that all of them were ok. If I knew that something was going on, I wouldnt shipped them in first place

Imeo,
As my GG has not arrived(by choice!) I am not able to test my Ithakas or Odys and I am sure you covered this but, can you identify the batch of serial numbers that was sent to each of the machine shops to narrow your run numbers of the new base?
Much like our buddy aal, I am more than happy to pay a bit for new bases. Shipping must be covered as well.

 

[Idaholandho]

unfortunately not Idaho. I mixed them because I thought that all of them were ok. If I knew that something was going on, I wouldnt shipped them in first place

Oh I am sure of that, I know you are very smart and good to us. I was just hoping serial # xxx-xxx was noted to each shop, thats all.

 

[Supacrazyguy]

the good ones leave 1mm gap when bad ones leave a big gap aal.

I will not charge anything even if 3 euros are a small amount of money for everyone of you. Its a very big amount for me but I will handle this cost, no problem

Your the best Imeo , even so I would be willing to pay for a ct that can take the oddy .

Sent from my Nexus 7 using Tapatalk now Free

 

[yankeebobo]

Yeah I understand this but there are GG fans that may not have ody yet, looking to buy back an ody, or have gotten a taste of ithaka and JGG and will want to gather up one of the classics.

I know of a few. I definitely can see someone trying, being upset that it doesn't fit, and then having to wait a few weeks to get that piece.

No reason for people without an Ody-native GGTS base or an Iatty-native GGTS base to ask for a new CT Yankee. They can do it only when they will need it but I doupt that they will ever need this because Iatty and Ody are out of production.

But when they will need it they can have it at any time, thats a warranty from me.


ps...... we mustnt forget that justGG works just fine with Ithaka, so no reason for panic here

 

[Rajuisha]

Imeo, although my Ody doesn't sit flush I'm not really fussed and wouldn't want a replacement but I don't know if I will have problems later with the others.
But since you were only gonna charge 3 euro, I have no problem paying that. Although I would agree with Guts, I'm thinking of how much it will cost you, and your not actually asking for much either. Mistakes happen, we all know you very well and if it was someone else then I would tell them I want it for free.

 

[imeothanasis]

better wait for 1 week delivery than wait for 2-3 weeks Yankee. I say this because those new bases will not be all of them ready at once, it will take time. So people that dont own Ody or Iatty native bases, better to not ask now for CT, because its just useless and they will delay me to make those CT for people that really want them. Most people will never need the new CT

Yeah I understand this but there are GG fans that may not have ody yet, looking to buy back an ody, or have gotten a taste of ithaka and JGG and will want to gather up one of the classics.

I know of a few. I definitely can see someone trying, being upset that it doesn't fit, and then having to wait a few weeks to get that piece.

 

[imeothanasis]

Maybe I will ask for nothing, maybe for 1 euro Raj. Lets say that this one euro is for the free button heads that I send you.

Anyway, 1 euro is not our issue here. The issue is to try to make those CT as soon as possible for Ody-Iatty users with native GGTS bases. Thats what I focus on now.

Imeo, although my Ody doesn't sit flush I'm not really fussed and wouldn't want a replacement but I don't know if I will have problems later with the others.
But since you were only gonna charge 3 euro, I have no problem paying that. Although I would agree with Guts, I'm thinking of how much it will cost you, and your not actually asking for much either. Mistakes happen, we all know you very well and if it was someone else then I would tell them I want it for free.

 

[subver]

I finally got my JustGG today! I love it! It's beautiful. Full SS. Mine is #0240, pretty nice low number. I have no spaces anywhere with Ithaka and an 18650 battery. I don't have the little brass connector on the Ithaka screwed in, but it all screws together nice and snug.
Vapes great!
Thanks Imeo

 

[patsfan1130]

My apologies for asking...Just so I am clear..Some people cannot use Iatty with native connection? I just tried to use mine on my JGG (native connection) and it won't fire. Want to make sure it isn't something I'm doing

 

[Aal_]

My apologies for asking...Just so I am clear..Some people cannot use Iatty with native connection? I just tried to use mine on my JGG (native connection) and it won't fire. Want to make sure it isn't something I'm doing

Is there a gap? How big is it?

 

[patsfan1130]

I would say there is a 2mm gap