Just GG

[Itshak]

There is one more thing against a Brass internal of CT.
When we have only central post from brass and it get gunk and dark,
No problem to wipe it and polish it again for better electric contact,or to avoid
Chemical reaction, of brass.
But if all internal of CT will be from brass and we connect using GGTS connection
That mean juice and humidety will be gunk all over the iternal,a thing that could
Be avoid when using 510 connection on a Stealth cap,as then most of
E juice swet and humidity are containd in the 510 connection.

There is allways some juice or humidty and heat in this place,and it's
Not easy in practical way to get inside and polish properly.
And evry other day this mean to polish the internal of the CT,
To avoid total trash and darkening in a way we need to use power tool to recover it!
On SS it's a simple "Wipe and Pipe".
On Brass I think it's pain in the ....sorry thats me thinking.
Its not like polishing the outside of the tube,(and the threed issue).

I don't want to be a CT slave on daily routin as I
intent to use the brass JGG on daily base,and heavy duty 24/7 vaping.

 

[imeothanasis]

is this one or 2 pieces xtreme?

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ View attachment 261246

 

[xtreme101]

One I believe ~ It cannot be taken apart if thats what you mean.

 

[imeothanasis]

I mean that its two parts very tight each other or just a coated item?

Because both solutions are not good xtreme

 

[xtreme101]

Brass would be nice ~ However main concern is that ~ CT Tank and all GG be compatible ~http://www.e-cigarette-forum.com/forum/gg/442942-just-gg-263.html#post10965308

 

[xtreme101]

~ ~ ~

Bish the truth is that after I got the Ithaka I never made a dual coil again on the Ody because it was just easier to do it on the Ithaka. I did a dual setup yesterday on my Ody and boy I had actually forgotten how good it is. I may even venture to say it's better than Ithaka in that the throat hit is so much smoother and more intense. No doubt about it that Ody is an awesome atty.

~ ~ ~

 

[xtreme101]

~ ~ ~

GG devices should always be compatible ~ Family should never be seperated.

~ That is why I feel this way. ~ #2627 ~

~ ~ ~

 

[CaptSteve]

~ ~ ~ and your point is?~ ~ ~

 

[Shaketuga]

Goodmorning from Greece

I'll post a picture here for those that have been asked it, or they want to see where is the small plastic that they must remove from the venting cap of JustGG, to bypass the spring inside the axis without removing the spring



You can either remove the small cap or the small plastic inside an put the small cap again on axis

Cheers

Thanks amigo!


Sent from: The Land of Tortuga!

 

[Mddally]

Guys, I believe the brass ct and toxicity should be a non-issue.
A Toxicity release from the material would be at temperatures
Well above your ability to even handle the device let alone vape it.
As far as corrosion goes that's a different story.

 

[Idaholandho]

Anyone have a link to the specifics of the dangers of using brass? I'm interested in specifics, what happens, when do things happen, and how big of a concern is it?
Even though I'm not a brass CT advocate, I do use copper connectors in my GGTS CT, because they perform the best.

Poppa hope your well. I also use or use many brass/aluminum/copper and other potentially harmful if ingested metals inside my GG/GP for conductivity purpose only. Internal pieces to not generate/accumulate enough heat to be alarmed.
Although, applying direct heat to these metals is not safe as the fume exposure and ingestion of such is what we should avoid. It is imperative that it is avoided.
There are many types of brass and many different % of metals that make up many different grades of brass. Aluminum as you know not used in the tanks of Atomizers unless anodized or coated for saftey as the ingestion is unsafe. And, aluminum is used in brass for strength. There are other dangers as well used in brass such as Zinc and Copper and direct ingestion is potentially harmful. As we do cook in some metals we do not heat it directly with red hot coils and ingest it.

Please google "smoking from brass" or "fume fever".

 

[imeothanasis]

The only serious reason that I see using brass in contact with liquid is the tarnish of brass. But we have another issue. What will you use to remove tarnish? Autosol for example. And how you will totally remove autosol from CT to use it again?

Those are real problems and cleaning CT will be a pain.

We have to make a brass cover for an SS CT. Ok, I am going to think more about it and I will report in a while

 

[tribe]

The only serious reason that I see using brass in contact with liquid is the tarnish of brass. But we have another issue. What will you use to remove tarnish? Autosol for example. And how you will totally remove autosol from CT to use it again?

Those are real problems and cleaning CT will be a pain.

We have to make a brass cover for an SS CT. Ok, I am going to think more about it and I will report in a while

We still may want to have a shelf queen all brass so go ahead with it!

Cheers


Sent from my iPad using Tapatalk HD

 

[steliosss]

I never collect unusable items.
If imeo makes a full brass CT, that would be my first obsolescence of a GG item.
But I'm sure he never do that!!!!!
I wouldn't even buy it for my collection.
Yes, he wants to satisfy every vaper but there are some insurmountable limits.
One of them is safety.
We quιt smoking for that reason IMHO, so let him find another way to make us happy.

I say NO to an unsafe full brass CT

 

[Idaholandho]

I never collect unusable items.
If imeo makes a full brass CT, that would be my first obsolescence of a GG item.
But I'm sure he never do that!!!!!
I wouldn't even buy it for my collection.
Yes, he wants to satisfy every vaper but there are some insurmountable limits.
One of them is safety.
We quιt smoking for that reason IMHO, so let him find another way to make us happy. I say NO to an unsafe full brass CT

Well spoken my friend, well spoken.

 

[dspin]

I never collect unusable items.
If imeo makes a full brass CT, that would be my first obsolescence of a GG item.
But I'm sure he never do that!!!!!
I wouldn't even buy it for my collection.
Yes, he wants to satisfy every vaper but there are some insurmountable limits.
One of them is safety.
We quιt smoking for that reason IMHO, so let him find another way to make us happy.

I say NO to an unsafe full brass CT

Agreed, unsafe and should not be made

 

[Aal_]

OK guys I am back to Athens, gonna go get my JGG today!!! I am the last one to open the package I assume?

 

[soulseek]

I never collect unusable items.
If imeo makes a full brass CT, that would be my first obsolescence of a GG item.
But I'm sure he never do that!!!!!
I wouldn't even buy it for my collection.
Yes, he wants to satisfy every vaper but there are some insurmountable limits.
One of them is safety.
We quιt smoking for that reason IMHO, so let him find another way to make us happy.

I say NO to an unsafe full brass CT

Some of us vapers have never smoked in our life

But I agree, I'd say no to a full brass CT.

If on the other hand Imeo makes a brass shell with an inner SS lining for the CT I wouldn't say no.

 

[tribe]

I say yes to a full brass CT. and I say no to anybody telling me what's safe for me and what's not


Sent from my iPad using Tapatalk HD

 

[Darkreign]

I think I have to agree with Tribe on this one. What is the difference between a brass CT tank and the Brass Stealth cap? If your atty leaks, juice gets in the 510 connection on the brass and we still use the brass stealth cap. In effect, the stealth cap is the same as a CT, but with a very tiny reservoir (the 510 connection itself). And for that matter, the adjustable connection on the Ithaka is brass, is this unhealthy too? If you can prove to me that people reuse the juice that goes into the collector tank then I might rethink this position for consideration of others. But as it stands, I don't think most people would go to the trouble of trying to recover any liquid that might be lost through atomizer leakage.

I vote to make the Brass CT