Just GG

[devine33]

Hi griffin its devine33, ive been on here a while but only just started posting, also need to change my name but don't no how LOL. As for the problem your having with the base screwing in I think Imeo is aware off the problem and he is sending out new CT to them who need them, im not sure how you go about it tho

 

[S8 ESX]

Welcome mate, not sure how to change names on here, so cant help on that one. quite new myself, but appears to have a good crowd.

 

[Ariel_MX]

Hi everyone. Just got a new king for my Just GG. My first Odysseus. Only problem is the GG base won't screw in. Only goes in a few threads. Tried screwing it into my Ithaka base and my GGTS and it fits fine. Sorry im new to all this so don't know if this is a known problem or its a problem just with my setup.

Yes, it is a known issue.

Imeo is making new replacement collectors tanks for the Just GGs with that problem, new collector tanks will be available through official sellers (Bitfumo, e-smokeguru and COV). I think you can send a message to your prefered GG seller including your Just GG order number and they will reserve one replacement collector tank.

Ithaka shoud screw just fine in the Just GG native GG connection, there was a small difference between collector tanks batches, so in some of them you won't be able to screw the Odysseus and/or iAtty in the Just GG native GG connector.

I think there will be a recovery cost of 1 euro for the cases in which Odysseus or iAtty with GG native connector screw fine in the Just GG but do not sit flush (1mm gap aprox), I'm unsure if there will be no cost for the cases in which Odysseus or iAtty do not screw in at all (your case).

 

[Itshak]

Hi griffin its devine33, ive been on here a while but only just started posting, also need to change my name but don't no how LOL. As for the problem your having with the base screwing in I think Imeo is aware off the problem and he is sending out new CT to them who need them, im not sure how you go about it tho

On top right corner of screen,click "setting"then choose "edit name" on right column.
All new member wellcome to Babylon 5 GG vape station,
No better place for fellow GG vapers, as I discovered myself!

 

[the griffin]

Hi Ariel. Thanks for that. I have emailed Vassilis and he has put me on the list. And hi to Divine33. Only just started posting here myself. As I seem to be building my GG collection can see it happening more and more.

 

[Yaya]

welcome Chris

Likewise Chris.

 

[CaptSteve]

Yaya with a name like that you got to be Greek

 

[imeothanasis]

how long the kick is aal?

This is the piece imeo. This piece is an aftermarket piece that I bought from a German guy. It was meant for accommodating 650 on a stealth. The polish work is not as good as GG quality that's why we want you to do it. This is the best looking configuration for me. It is for 18650 kicked.

 

[imeothanasis]

GGTB is thin dust, so we cant make it like this

That would awesome imeo. Wouldn't it be like a version of a gtbb. Maybe run a 18650 gtbb pre order in the future

 

[fright88]

how long the kick is aal?

Imeo it looks like the kick is right around 17mm. With JGG I have found that if I add a GGTS top tube the battery will not make contact with 1 extra JGG top tube there is still 1-3mm of telescope showing depending on the battery.

 

[fright88]

GGTB is thin dust, so we cant make it like this

I think what some people would like to see is a GG made like a GGTB with 1 body tube a top and a bottom cap but for 18650 batteries. The advantages would be cheaper price because of less parts. Also would be lighter then a JGG or GGTS and would have a smaller diameter.

 

[blue_gr]

GGB 18500 only - im dreaming lol

 

[imeothanasis]

and if you remove the SS cover with its plastic from justGG fright? Then justGG will completely close?

Imeo it looks like the kick is right around 17mm. With JGG I have found that if I add a GGTS top tube the battery will not make contact with 1 extra JGG top tube there is still 1-3mm of telescope showing depending on the battery.

 

[imeothanasis]

it will be heavier fright because it will be a solid tube when justGG and GGTS have parts with less external diameter where threads are.

Cheaper? yes of couse. Half the price of justGG

As for the smaller diameter, I can make it really thin but what atomizer will fit there?

I think what some people would like to see is a GG made like a GGTB with 1 body tube a top and a bottom cap but for 18650 batteries. The advantages would be cheaper price because of less parts. Also would be lighter then a JGG or GGTS and would have a smaller diameter.

 

[imeothanasis]

guys, I have a question.

First of all you know my style, that is all features in one device and also a device that will look beautiful at the same time. But some of you ask me for something very simple that will not have functions, just a tube and 2 caps. Why do you want this?

 

[blue_gr]

People like minimal imeo

 

[Yaya]

Yaya with a name like that you got to be Greek

Yes Capn. What took you so long lol kaloxsimeroma.

 

[imeothanasis]

ggtb was minimal and I sold 500 units in 3 months when I sell 2000 pieces in 1 hour blue. No one really liked them. But if things changed then we can make minimal constructions again, no problem. Easier for me and cheaper for you. But I do hate simple mods, they dont offer anything to the user

 

[Yaya]

Hi Ariel. Thanks for that. I have emailed Vassilis and he has put me on the list. And hi to Divine33. Only just started posting here myself. As I seem to be building my GG collection can see it happening more and more.

Welcome to wonderland Griff

 

[blue_gr]

ggtb was minimal and I sold 500 units in 3 months when I sell 2000 pieces in 1 hour blue. No one really liked them. But if things changed then we can make minimal constructions again, no problem. Easier for me and cheaper for you. But I do hate simple mods, they dont offer anything to the user

I think it is the right time for a solid tube GG with small dimension air control system.