Kayfun LITE - Part 2

[ricks]

It should stay the way it is. They are Both kayfuns whether you like it or not. It's a great thread!

 

[qorax]

Ppl pls. Let's cut it out and concentrate...

This is how I fill my KFLs:

How do you do it?

 

[Woofer]

Ppl pls. Let's cut it out and concentrate...

This is how I fill my KFLs:

How do you do it?

I have never filled your KFLs but if I ever did I would use a similar method.

 

[HBcorpse]

Want to clarify something. Yes, I said this thread WAS all about authentics before there were any KFL clones. However, I did NOT say it should be restored to authentic only. I wouldn't say that because I have no power to do that. Just want to be sure I'm quoted correctly.

Correct. You did not say that...my grammar and syntax were incorrect, and shall be amended.

On an aside, if one were to not have the power to restore this thread to all authentic, then how did it convert in the first place?

 

[HBcorpse]

Ppl pls. Let's cut it out and concentrate...

This is how I fill my KFLs:

How do you do it?

[emoji33][emoji33][emoji33][emoji33][emoji33][emoji33][emoji33][emoji33]
Without a fine tip juice bottle?

I can't even imagine any other bottle than this, for filling a Kayfun...works very well on lots of other things too!

 

[Bronze]

Correct. You did not say that...my grammar and syntax were incorrect, and shall be amended.

On an aside, if one were to not have the power to restore this thread to all authentic, then how did it convert in the first place?

As the clones appeared so did the clone threadsters. We've been through these discussions before on this thread. This is not new. But as before, it is time to move on.

 

[ricks]

Ppl pls. Let's cut it out and concentrate...

This is how I fill my KFLs:

How do you do it?

I either use a syringe or I use a needle tip on my juice bottles.

 

[Bronze]

Q, looks like you robbed your standard K4 drip tip and tossed it on your KFL.

 

[Dusty_D]

I don't have fine tipped or needle tipped bottles. Syringe or jammed up against the fill hole has worked just fine since I got my first KFL..

 

[Woofer]

Q, looks like you robbed your standard K4 drip tip and tossed it on your KFL.

The v4 has a gyroscopic stabilizer in the drip tip don``t ya know, it assists the one handed fill maneuver.

 

[Bronze]

The v4 has a gyroscopic stabilizer in the drip tip don``t ya know, it assists the one handed fill maneuver.

How many jigawatts does it run on?

 

[Woofer]

How many jigawatts does it run on?

A quadrillion!!! and I think Russia may be a long scale country

 

[Woofer]

jammed up against the fill hole

Dusty, thanks for reminding me to see if pbusardo has any vids from China yet.

 

[Kyi]

Hey guys, I have a quick question. For those of you using the Kayfun bell caps, does it fit on top of the normal Kayfun nano chimneys or do I need to get some different kind of chimney? I'm about to order some from FT and I'm wondering if i need to get the kit that includes the chimney or if I can just buy the caps. I have 3 KFL all in nano mode so if I can use these just fine with the nano chimneys I have here then I will just get the caps without the entire kit including the chimney and base.

 

[Bronze]

Hey guys, I have a quick question. For those of you using the Kayfun bell caps, does it fit on top of the normal Kayfun nano chimneys or do I need to get some different kind of chimney? I'm about to order some from FT and I'm wondering if i need to get the kit that includes the chimney or if I can just buy the caps. I have 3 KFL all in nano mode so if I can use these just fine with the nano chimneys I have here then I will just get the caps without the entire kit including the chimney and base.

PM Dusty (his link is on a previous page) if you want a quick answer. He has the bell tanks.

 

[Grrrr]

Q, looks like you robbed your standard K4 drip tip and tossed it on your KFL.

I think that's a GUS kiss driptip.

 

[MattB101]

Not all B&Ms are out to fleece you. We have an amazing one here ~ one of the largest chains, pretty competitive pricing and good CS to boot!

www.CANVAPE.com Canada's one stop shop for e-cigarettes

My vape journey began with them. Also being registered at ECF they are the ones who brought me here as well.

Q, I'm not saying they are all bad by any means, just that around here it's hard to find one that's not on the "if it's not a sub-ohm mechanical it's not worth buying" bandwagon and overpriced to boot. Bad overpriced. I have talked to lots of folk on ECF that absolutely love their local B&M. Just wish we had a good one. Most of ours have only been around for the last year maximum. Before that we didn't have any. I'm in Tidewater, VA so it's not like it's a small town. Largest Navy Base in the world and Langley AFB. Lots of vapers.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

 

[MattB101]

I will discuss the "authentic vs clone" subject no further, as it is completely asinine.
People buy what they buy, for their own reasons.
However, as stated by Bronze, this thread WAS (and I feel it should be restored to) an AUTHENTIC thread...
All talk of clones should be moved to clone threads. Bottom line. End of story.
I don't care how "just as good" a clone may be...it is still just that. A clone. NOT AN AUTHENTIC.
EDIT: I'm not trying to be elitist, as I own just as many clones as authentic pieces. However, I see the line between the two very clearly. I don't treat one as the other. For me, regardless of how good my clones may work, they are still just clones.
That's my vote.
And anyone just trying to start or prolong arguments should be spoken to by moderators...because that person has very clearly identified themselves in the last few dozen posts. Not naming any names, but I'm 100% Dusty knows who I'm referring to.

HBcorpse

Jeez, give it a rest. Please.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

 

[MattB101]

How many jigawatts does it run on?

Smallest Flux Capacitor made. Positively tiny but, powerful.

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!

 

[MattB101]

Hey guys, I have a quick question. For those of you using the Kayfun bell caps, does it fit on top of the normal Kayfun nano chimneys or do I need to get some different kind of chimney? I'm about to order some from FT and I'm wondering if i need to get the kit that includes the chimney or if I can just buy the caps. I have 3 KFL all in nano mode so if I can use these just fine with the nano chimneys I have here then I will just get the caps without the entire kit including the chimney and base.

I think they fit the regular chimney. Unless they make one for the nano too. What's the appeal with them other than looking cool?

Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!