Kayfun LITE - Part 2

[Robinowitz]

Hi Everyone, I found my favorite mod - a Provari Mini with a flat top design which I prefer. It is super light weight made since it is made of Titanium. Is it worth $199?

View attachment 417596

Absolutely! You are paying a bit more for the titanium. If it is important to you that it is light weight, I would say go for it. I bought my 1st 2.5 mini almost 5 yrs. ago when I started vaping and recently sold it for almost 2/3 of what I paid, 2 years ago. They hold their value because they work...and work...and work. A smart investment. Just MHO.

Might want to check with folks over in the Provape/Provari thread. Maybe some more specifics about the titanium.

 

[TrollDragon]

Looks like an Infinite clone maybe...

Same base with no date code.
Review Here

 

[Woofer]

Thanks guys it was a rhetorical question.. a figure of speech in the form of a question that is asked in order to make a point, rather than to elicit an answer.

The Kayfun for one, the Provari. [emoji4]

China makes a few more Kayfuns then SM.

All my mods, 95% of my attys, and all my e-liquid.....

Perhaps, I doubt your nic was extracted in the US, maybe India or China.

Regardless China owns us.

 

[Robinowitz]

No question from me Woofer, about whether or not China owns us. (Yes, I understand the term rhetorical). My point was that in some cases it is possible to spend some of my pennies towards US or non-Chineese manufactured goods. And yes, there are e-liquids that are made from US grown tobacco or nicotene that is extracted here. I would be happy to share the companies in a PM if you are looking for some.

Certainly don't want to create discord here. Happy vaping all.

 

[HBcorpse]

Hi Everyone, I found my favorite mod - a Provari Mini with a flat top design which I prefer. It is super light weight made since it is made of Titanium. Is it worth $199?

View attachment 417596

Don't want to rain on your parade, but that's not a Mini...that's a full size.
Here's the Mini (notice the tear drops vs crop circles)


I think it is a FANTASTIC device.
However, you can save some money by not getting a titanium model...unless you're REALLY set on that...
Provape is about to release an updated version of their Classic v2.5...

Available right now:
http://www.vapeescape.co.uk/MODS-Advanced/Provari-Mini-P3/Provari-Classic-2015.Html
Or you can wait a little longer for it to get a wider release!
Honestly, if you're about to invest in your first Provari, I'd wait for this one if I were you.
See, you're coming into the mod-shopping game at a very fortunate time...
Provape was a little secretive for a long time before the P3 came out...and now that it's out, they've been dropping new models like hot rocks!
With the flat top, updated display and menu system, this upgraded New Classic is such a step up from the original v2.5, and you will love it.

 

[UncleChuck]

Not all the legit KFLs have the date on the bottom, I believe the second batch were the first to start having the dates, it could just be an old picture or old stock, might want to email them and ask if their current stock is dated or not.

I'd suggest contacting Svoemesto and ask if they supply that retailer.

 

[qorax]

This vendor came up on the Provari thread. Does anyone know if this is truly an authentic? I'm highly skeptical. Never heard of them before.

Kayfun Lite Plus By SvoeMesto

I'm not sure if this vendor is legit or otherwise, however if I had to purchase a Kayfun I'd only buy it from VapeRev, C9V or InTaste. With a hull load of counterfeits floating around ~ I'd be wary of getting mine from elsewhere.

Btw, here's the list of Authorized Resellers of SMTec products in the EU, and I believe VapeRev is the only one in the Americas:

SvoëMesto | Merchant list

Ps.: Thank you Bronze for inviting me to this post.

 

[Pinggolfer]

Thanks guys it was a rhetorical question.. a figure of speech in the form of a question that is asked in order to make a point, rather than to elicit an answer.


China makes a few more Kayfuns then SM.


Perhaps, I doubt your nic was extracted in the US, maybe India or China.

Regardless China owns us.

Yes China owns us and it's nothing to be proud of. They also hack the Pentagon 100 of times a week,

 

[raitizz]

Had this in another thread...

yea I got all mine from vaperev and glad they are now on sale. but not saying other places will not start packing them now, as far as I know the KFL+ is still in production yea?

SMs owh shop, if German is selected, says Solange der Vorrat reicht! on the KFL+, which means While stocks last. I just got mine from them, and it was made in August 2014. If even SM themselves could bee soon out of stock, then what do I infere from that...

R

 

[Dusty_D]

Any of you guys have a DNA 30 mod? Curious to know if anyone is using a 26gauge build on it, and if so what build you have on there given that the DNA 30 does not step down voltage.

 

[snow blind]

Any of you guys have a DNA 30 mod? Curious to know if anyone is using a 26gauge build on it, and if so what build you have on there given that the DNA 30 does not step down voltage.

I was doing 3mm i.d. 26 gauge spaced 1ohm builds but i hated the heat retention. I went back to 28 gauge spaced and much prefer them in RTAs with more restricted airflow.

 

[Dusty_D]

You wicking your spaced 28 with Rayon or cotton?

 

[Woofer]

Certainly don't want to create discord here. Happy vaping all.

Robinowitz, happy vaping to you too!

 

[Exchaner]

Don't want to rain on your parade, but that's not a Mini...that's a full size.

Man, I wish I had read your post before placing my order. I tried canceling through their system, but that didn't work. The message said too late to cancel since the order had already been processed - nonsense since I only placed the order 20 minutes before. I sent them an e-mail through general inquiries instead and requested the cancellation. Will see what happens. They have a money back guarantee anyway. Thanks HB. You saying there is no mini version in Titanium? Weight is very important to me. I want my mod to weigh no more than the cigarettes I used to smoke

 

[BadTrainDriver]

Hi Everyone, I found my favorite mod - a Provari Mini with a flat top design which I prefer. It is super light weight made since it is made of Titanium. Is it worth $199?

View attachment 417596

That isn't the "Mini", that is the full size. You cannot run the full size in 18350 mode, FYI.

 

[BadTrainDriver]

This vendor came up on the Provari thread. Does anyone know if this is truly an authentic? I'm highly skeptical. Never heard of them before.

Kayfun Lite Plus By SvoeMesto

The KFL+ in that picture is FOR SURE a counterfeit.

 

[BadTrainDriver]

That isn't the "Mini", that is the "Classic". You cannot run the Classic in 18350 mode, FYI.

FYI, I posted this before reading HB Corpse's reply.

Sorry for the duplicate information.

 

[Bronze]

The KFL+ in that picture is FOR SURE a counterfeit.

I'm convinced it is.

 

[Robinowitz]

Man, I wish I had read your post before placing my order. I tried canceling through their system, but that didn't work. The message said too late to cancel since the order had already been processed - nonsense since I only placed the order 20 minutes before. I sent them an e-mail through general inquiries instead and requested the cancellation. Will see what happens. They have a money back guarantee anyway. Thanks HB. You saying there is no mini version in Titanium? Weight is very important to me. I want my mod to weigh no more than the cigarettes I used to smoke

So sorry I lead you astray. I saw Provari and didn't read on about the size. If it's from Provape, they are responsive and easy to work with.

 

[HBcorpse]

Man, I wish I had read your post before placing my order. I tried canceling through their system, but that didn't work. The message said too late to cancel since the order had already been processed - nonsense since I only placed the order 20 minutes before. I sent them an e-mail through general inquiries instead and requested the cancellation. Will see what happens. They have a money back guarantee anyway. Thanks HB. You saying there is no mini version in Titanium? Weight is very important to me. I want my mod to weigh no more than the cigarettes I used to smoke

The first picture I posted in my reply to you is a picture of the TI Mini...
The Provari Mini models have a tear drop design on the tube, whereas the "Long" models have that crop circle looking design...
If you ordered from Provape, they will take care of you.
If not, I hope whoever you bought from will help you out.