sorry to go off topic but, i'm about to buy a bolt and kick it. i plan on using a sleave, kick and a 18500. are you using flat top or button top with your kicked bolt? oh and, that setup looks nice, i like it!
Last edited:
- Status
Thanks!
I'm using an AW IMR 18490 that has a nipple. I would think that with 10 extra mm on your 18500 w/o a nipple it will fit. The Bolt has a large spring at the bottom and I think you'll be fine.
I'm using an AW IMR 18490 that has a nipple. I would think that with 10 extra mm on your 18500 w/o a nipple it will fit. The Bolt has a large spring at the bottom and I think you'll be fine.
the bolt is one of the best and most reliable devices on the market-i have 3 of them, and they have yet to let me down.
This is even further OT, but I've got one of the Sigelei kick clones right in front of me.
Haven't used it yet, but I intend to drop it in (on top of?) the battery in either my K100 or China GG.
I'll take macros of the kick clone first.
Want me to post 'em in in here?
Haven't used it yet, but I intend to drop it in (on top of?) the battery in either my K100 or China GG.
I'll take macros of the kick clone first.
Want me to post 'em in in here?
no wiring issues? but from my understanding it's not that hard to replace the horn button and wiring anyway, plus im good at that kinda thing. just curious though, i've read if you pump to many amps through the factory wires it will fail, but i've also read newer models don't have that issue... man, i gotta quit hijacking this thread...
I believe that SmokTech upgraded the gauge of wire after lots of people rightfully complained, so I would think that a newly purchased one would be fine. I took off the inside plastic white cap and saw that the wires were as thick as what I've seen in YouTube videos about upgrading them. That's certainly an option if needed. I like that it's relatively inexpensive and pretty scratch-proof and I don't hesitate to grab it on the go and leave my better quality and more expensive mods at home. Not unlike the Terminator (to try to bring it back on topic, although I thought pairing it with another SmokTech product was appropriate).
Would love to get others' comparisons of these TT's to other atomizers. I've never used cartomizers so I can't compare to them. The flavor seems on par with Vivi Novas or other clearos to me. It doesn't come close to a genny, the Terminator oddy clone, Kayfun, or RDA's IMHO. I'm not giving up on these, as the convenience is a big plus, but I'm not getting the flavor I would like. I'm using cotton yarn and 32g wire with 4 wraps. I would love to hear any tips on squeezing out more flavor.
im digging my kick clone. its not as good as the original kick, but i didnt expect it to be. the sigelei kick vape is to me, like a vamo vape.
I think you're being too hard on Todd. He was honest about his dislike for the device and why he didn't like it, I do not find that problematic in any way. He is letting people know about his experience. What's garbage to one person is the bomb to the next, that's the great thing about vaping. Give the man a break.
I like Todd's reviews and in my opinion that TT review was his best video ever 
)
His review didn't stop me from ordering 2 terminators, because it's just one man's opinion. I've read a lot about the pros and cons of the TT so I have to test it for myself. If it sucks for me, then Todd and I share the same opinion. If it's good for me, then we don't share the same opinion. Either way, life goes on and your opinion is the only one that matters to you. No need to bash other people over opinions on vapegear.
sent from my phone
) His review didn't stop me from ordering 2 terminators, because it's just one man's opinion. I've read a lot about the pros and cons of the TT so I have to test it for myself. If it sucks for me, then Todd and I share the same opinion. If it's good for me, then we don't share the same opinion. Either way, life goes on and your opinion is the only one that matters to you. No need to bash other people over opinions on vapegear.
sent from my phone
what do you do when the juice level falls below the feed holes level? in an AGR tank there is a good half an inch of juice left down there.
I would not bash someone for their opinion on vape gear if it was a legitimate opinion.
My problem with Todd isn't whether I agree or disagree with his reviews.
My problem with Todd is that he disables comments on his YouTube videos, like his word is some sort of indisputable holy writ handed down from on high.
It's not Todds opinions or even the style of his reviews that I have an issue with.
It's Todds apparent opinion of HIMSELF that ruffles my feathers...
I push the tank up so the gap in the juice control is at the very bottom of the tank and filling with juice.
as Todd stated in this very thread you can comment on the videos on his site if you want. you can post your own comments here: Todds Reviews: SmokTech Terminator RDA Tank
if he wants to redirect people to his own site i don't see a problem...
personally, i wouldnt want to weed through and try to answer in 2 different places plus try to defend myself on multiple forums...
adding to that i find Todd's reviews quite enjoyable, and he seems to give a lot of goodies away. Seems like a good guy if you ask me.
can't do that with an AGR tank, the bottom hole is only big enough for the 510 connectin threads to go through.
what do you do when the juice level falls below the feed holes level? in an AGR tank there is a good half an inch of juice left down there.
this question is specificatly for the AGR tank but I appreciate the response firestorm.
i have thought about this issue too. and its one of the reasons why i havent gotten a locking tank. i think that bit of juice is in the unvapable zone and youd just have to refill. i thought about modding little wicks coming out of the jucie feed holes, but i doubt that would be sufficient. IDK.
Yeah - I didn't realize that it was specific to the AGR tank and not having one I wasn't aware of the limitations. Too bad - I use this method with my Killer, Divers, and Terminator in my OCD tanks and I look forward to vaping them dry and refilling them, perhaps with a new juice.
It sounds like you have your terminator set in the tank so that just the threaded part of the 510 connector is sticking out the bottom of the tank (so it sits flush on the top of your mod.)
If you push the Terminator into the tank all the way down, so that the bottom of the bulb is flush with the inside of the bottom cap, the "intake ports" where the 510 extender and the "bulb" come together with be pretty much flush with the bottom of the tank, and you should, theoretically, be able to vape it almost dry.
Of course, your 510 extender will stick out a little farther from the bottom of the tank, so it won't sit flush on the top of your mod, but I think a visual gap of 1/8" between your mod and the bottom of the tank is an acceptable compromise for being able to get every last drop of juice out of your tank, if that is what you are trying to do.
If a gap between your tank and your mod is simply intolerable, then I would suggest getting a hybrid... ;-)
- Status
Similar threads
- Locked
