Just a question about the draw on the 808.. Is there anyway to tighten up the draw
so that is not quite as airy?
so that is not quite as airy?
kr8 draw
- Thread starter hypermite
- Start date
- th_trl_thread_readers 0
- Status
Play with the tightness of the carto. I get this too and it's annoying! If I can't get it by messing with the tightness I switch batteries (I have 6). Also, try covering one hole.
Try breaking off a round wooden toothpick in one of the little holes under the threads. Jam it in good & tight with your thumbnail or something.
It's easy to dig the toothpick tip out with a pin if you don't like it.
It's easy to dig the toothpick tip out with a pin if you don't like it.
A thin sliver of adhesive tape can also be used to cover up one hole. This is a super easy to reverse modification!
When using an auto batt you can cut off a ring from 1 of the rubber cups that come on the new cartos. Take this ring and place it on the end of the battery so that it overlaps the threads. Screw on the carto and the holes are covered. All of the draw now comes thru the battery. Draw is reduced and vapor is increased.
I was wondering about the airy draw too. I've had a KR8 manual battery for a month or so. I've been using the adapter to M201 atty and it's a great combination. After seeing the new carto filling method, I decided to give the cartos a try but I can't get them to screw on to the battery all the way. After trying (and not loosely either), the holes are very much exposed and makes for an airy draw. I really have to force the turn to cover the holes. I mean, I can get my adapter on tightly with no force. What's up with the cartos, is this normal? I just don't want to mess up the battery.
Unfortunately, in my case the mod is reversed before it's even completed, I cannot get the tape to stay in place (have tremor due to thyroid prob)
I've been reduced to using a Creator (808?) battery with 901 atty and covering the hole in the atty to get some draw.
If I can't keep my temper the Cartos will be out the window, they're ABSOLUTELY USELESS
(Which is far from the wonderful vaping experience that the first lot of cartos I bought (from Toby, these new ones are Cloud9) gave me.)
scylla
Maybe try using some tape on the outside where the cartomizer and the battery connect. Adjust how much of the connection is taped until you find the draw that you like. This method isn't quite as elegant as the hidden tape but it is a heck of a lot easier to do!
- Status
