Krimson Kustoms, 3.7v, 5, Variable Voltage and Evercool. Quality, Look, Great Price.

[GiMante]

Yay, I received mine today. I LOVE it! Thanks so much James!

I also used my mumlitmeter and made marks where 4v and 5v dial in. It's great!!!

 

[redheadone]

I am interested in getting one of your evercool's and just wanted to know if you have it in red with the red led. I would also like one with the catch cup. I read that you were going to put a thumb wheel adjustment on them for adjusting the voltage and was wondering if they come with one now. I am assuming that they take two 14500 batteries but was wondering if they were the protected or safe batteries Also what would the total price be including shipping and if you are still offering the twenty percent discount to do a video review. I have done reviews before so I don't mind doing one for you.

 

[JamesW]

Jewels, I've considered trying something of what you're talking about only slightly different, like a vinyl that heat applies to give a regular black box colors or patterns. A lot of folks like the transparent ones but some want a solid one that's just a different color.

The pictures look awesome guys, I'm happy you enjoy the mods and Gimante I do like the idea of marks for voltages I'm working on a system of grooves that are filled with color to make it last but I'm always afraid to do something to a finished product and have the dremel get away from me or just turn out poorly but the simple dot looks good.

So a little news for a couple folks that are waiting patiently I got my cases and displays in today so I'll be making a couple of the mods that needed to be made, looking at you debb, you've been really patient and I do appreciate it! Coolone as well I got the display and will be working on it in short order.

Other news, with the bottomfeeders I've had a little feedback that the feeding pipe will clip the airflow for some carts and got some info from Hairball that a shorty 510 adapter will allow for use with some of the cartos that weren't working out so great, thanks very much to hairball for that info!

For those of you that do have the feeders, do you like where the pipe is? Should it be flush with the bottom connection to help flow or will that nuke the feeding system? The feeding is newer to me and I've been using one of the ones I made as a prototype but I use an atty so I don't know too much about the carto side and I'm not stupid enough not to ask for information from those who have it. Anything you would change about them let me know and I will do my best to rework the design.

As always, you guys are awesome and I'm going to keep at it!

James

 

[GiMante]

James what 14500 batteries do you recommend to use in your mods?

 

[debb]

Thanks James!

 

[JamesW]

I test them with trustfire flamewrappers and blue wrappers. Never had an issue. Lots of folks have used aw imrs without issue though.

 

[eastman]

just a thought...would it be possible to have a recessed 510 connection so an atty or carto doesn't come out as far to make it even stealthier...just think don't know if it is possible

 

[JamesW]

Depends slightly on how much stuff is jammed in the box but on non-feeders I could recess the connection a bit if that was requested. I normally don't because a lot of folks that use mine like to use tanks and I couldn't really do a recessed tank in a 3xAA case.

 

[eastman]

Yeah non bottom feeder, I don't want it for tanks.

So what size box?

 

[JamesW]

I could recess a normal system probably a half inch or so. Like one of the 3xAA cases.

James

 

[fsroq]

A little 18650 bottomfeeder with display action? Oh yeah, 18650 Evercool Bottomfeeder with Display

James

Hi James,

My evercool 14500 still working very fine.

But OMG, have you seen dual coil atomizers are out at COV? Yes, no mistake ATOMIZERS dual coils.

So I ordered some, to see how they perform, but if they do as I imagen, I will need a bottom feeder with evercool and volt display, like the one I have seen here, or better a smaller one, because I believe this one is huge.

Can you tell me the size of this 18650 based one, and the price, and the size and price of the 14500 based bottom feeder with evercool and display.

Thxs.

 

[VictoryNotVengence]

PM Sent

requesting the "Fire Engine" mod. Sure to make alot of smoke!

 

[JamesW]

Can I still call it a blue devil? Not quite a Blue Devil...now that it's white with gold accents

James

 

[GiMante]

James, that is SICK!!! Awesome job dude! Now I want a white one too! (no gold though, Lol)

 

[debb]

that's my Pearl!..

 

[hairball]

Just wanted to drop in and give an update. I received my 18650 bottomfeeder with display last week...I think wednesday or thursday. I have been running it from 4.5-5v up until today (monday) with 2 x 2600mah AW black jacket batteries. Okay so that's 4-5 days of serious heavy vaping of 6-7mls a day. I just now had to change out the batteries. Holy cow...this is awesome runtime on a set of batteries.

When I first got the feeder, I didn't like the airdraw with a boge carto regular resistance...it was really tight. I found an extension that works beautifully. Downside is not all extensions are created equal as I had a hard time finding one that the steel tubing would fit into. I have 10 of them and out of that 10, 6 wouldn't work. With the extension, I get the airflow I want and I've been happy since. If you have an adapter that won't fit, get a tiny circular file and file the hole out.

Thank you JamesW for building these. I will be back for another one once I decide what I want.

Are you still up to making one like Col. Gaunt has or similar to his? I've always wanted a double barrel.

 

[AaronY]

have a pic hairball?

 

[hairball]

have a pic hairball?

For size comparison, in the first pic from left to right is the Krimson Kustoms 18650 bottom feeder, Big Daddy by boxmods.net, and the Big Brother by boxmods.net.

The KK is a big mod but I've found that putting a finger through the hole in the back lets me get a good grip on it. I'm a gal with average sized hands and are no way dainty but any means.

 

[AaronY]

thanks. That would be great

 

[JamesW]

Hey hairball that's great news, How does that stack up compared to other 18650's you been using? I'm glad you like it and things are going well. I'm wondering if shortening the feed pipe would help the constriction of flow.

James