Here's a review from PB. Pretty funny. A Cranky PBusardo Review - A Real POS - The Kourada - YouTube Just puttin the link cause I'm not sure if it would break a rule.
- Status
They (fuses) are more like training wheels for most, but they're a good practice for those new to mechs and RBAs. Since they don't allow for ultra sub-ohm coils, I don't bother with them. Battery safety and proper coiling techniques is your best defense against mishaps. I experienced a hard short with a Kayfun (of all things) this summer. The mod button instantly got extremely hot and I knew what that meant. After putting the mod down and away for a minute, I opened it up. The battery was real hot, but it hadn't vented. When I opened the Kayfun up, the positive part of the deck had rotated and was in contact with the chimney wall. That's what caused the hard short and now I always make sure all necessary screws are fastened and all wires secured and tucked away. $h!t happens. It didn't take any effort on my part to cause that. Just the teensiest bit of ignorance is all it takes. That's why I always cringe when I see vaping newbies (let's call them pups) chasing clouds with FastTech batteries and bargain-barrel Smok mods. We're already facing a nation wide ban again. What do we think is going to happen when some teenager starts a fire in chem class?
OK, I'm ranting again. Back to my cave. 
Last edited:
Thanks for your advice guys.
I am on the notification list at VapeRev for the KFL. I am considering preordering a Russian 91 as well. No guaranteed delivery, which I think is pretty silly, and making me hesitant.
But I am sold on getting both. I cannot wait to experience the difference all you guys are raving about.
I am on the notification list at VapeRev for the KFL. I am considering preordering a Russian 91 as well. No guaranteed delivery, which I think is pretty silly, and making me hesitant.
But I am sold on getting both. I cannot wait to experience the difference all you guys are raving about.
Just watched both PB vids and the 2nd was hilarious LOL. What a piece of CRAP!!! The 1st gave me an idea to try to order straight from the horse's mouth, so to say - I ordered a KayFun Mini direct from Svoemesto's web site as iTaste,de was out of stock for 2 weeks. Cost me 3,300 RUB plus 500 RUB in shipping!!! What a deal!!!
In case you're wondering, 3,800 RUB is about $118.84 US! That includes shipping to Thailand. Saved about $30 I think. Just keep your fingers crossed that it goes under the radar at customs. Positive thoughts now everyone.
Think that it is in my hands already, without any problems. Like this: "Chakris (aka Chris Pf) in Bangkok, Thailand is now the proud owner of a KayFun Mini V2.1. and it is in his possession now!" That is your mantra. Repeat it as often as you can. TIA
In case you're wondering, 3,800 RUB is about $118.84 US! That includes shipping to Thailand. Saved about $30 I think. Just keep your fingers crossed that it goes under the radar at customs. Positive thoughts now everyone.
Think that it is in my hands already, without any problems. Like this: "Chakris (aka Chris Pf) in Bangkok, Thailand is now the proud owner of a KayFun Mini V2.1. and it is in his possession now!" That is your mantra. Repeat it as often as you can. TIA 
They (fuses) are more like training wheels for most, but they're a good practice for those new to mechs and RBAs. Since they don't allow for ultra sub-ohm coils, I don't bother with them. Battery safety and proper coiling techniques is your best defense against mishaps. I experienced a hard short with a Kayfun (of all things) this summer. The mod button instantly got extremely hot and I knew what that meant. After putting the mod down and away for a minute, I opened it up. The battery was real hot, but it hadn't vented. When I opened the Kayfun up, the positive part of the deck had rotated and was in contact with the chimney wall. That's what caused the hard short and now I always make sure all necessary screws are fastened and all wires secured and tucked away. $h!t happens. It didn't take any effort on my part to cause that. Just the teensiest bit of ignorance is all it takes. That's why I always cringe when I see vaping newbies (let's call them pups) chasing clouds with FastTech batteries and bargain-barrel Smok mods. We're already facing a nation wide ban again. What do we think is going to happen when some teenager start's a fire in chem class?
Maybe you're ranting but it is necessary. I too worry about people bargain basement shopping. Furthermore, I do not trust Chinese products. They make crap! This is a deadly combination looking for a place to have an accident.
Number 3 has arrived.. 5 days to ship from Cali to me. Colour me impressed..
Number 3 has arrived.. 5 days to ship from Cali to me. Colour me impressed..
Did that come with 2 stainless tank sections?
I just received my Russian 91% again, the first ones air flow control hole wasn't threaded. This one is perfect. I just assembled it and it is now taking an alcohol bath to remove the machining oil. 28g micro coil is wrapped and ready to go in it
Sent from my iPad using Tapatalk 2
Did that come with 2 stainless tank sections?
I just received my Russian 91% again, the first ones air flow control hole wasn't threaded. This one is perfect. I just assembled it and it is now taking an alcohol bath to remove the machining oil. 28g micro coil is wrapped and ready to go in it
Waiting for thoughts on the Russian.
Sent from my iPad using Tapatalk 2
No, what you're seeing is the Twins for my Provari mini. The regular extended cap is starting to show some wear, and I figured the Twins would dress it up nicely with the KLite on top..
Sent from my iPhone using Tapatalk 2
On the train, so look up Twins for Provari on google. It's a threaded extension cap that let's you use the Provari mini with either the 18500 or 18650 battery in addition to the 18350 battery.
Sent from my iPhone using Tapatalk 2
Oh cool, it looks like the finish is a perfect match with the Kayfun
I need to get my hands on a provari mini. I had a chance when I traded my EPM but sadly I chose to trade it for a Noble 1 which then got traded for 2 MKB-TS's, then 1 of them got traded for a 14500 Sprite with a Euphoria and some other titanium atty and they all just collect dust lol
Sent from my iPad using Tapatalk 2
I need to get my hands on a provari mini. I had a chance when I traded my EPM but sadly I chose to trade it for a Noble 1
which then got traded for 2 MKB-TS's, then 1 of them got traded for a 14500 Sprite with a Euphoria and some other titanium atty and they all just collect dust lolSent from my iPad using Tapatalk 2
Oh cool, it looks like the finish is a perfect match with the Kayfun
I need to get my hands on a provari mini. I had a chance when I traded my EPM but sadly I chose to trade it for a Noble 1
Sent from my iPad using Tapatalk 2
Sad! I think Mpicc is the only one I know of that got rid of his Provari to go to an all mech setup. I cannot do without my Provari's...
Sent from my iPhone using Tapatalk 2
Yeah I couldn't give up my provari either. Besides my Kayfun 3.1 it's the best vape purchase I have made
I don't know what I was thinking even trading the EPM, now I miss it
Sent from my iPhone using Tapatalk Pro
Yeah I couldn't give up my provari either. Besides my Kayfun 3.1 it's the best vape purchase I have made
I don't know what I was thinking even trading the EPM, now I miss it
Sent from my iPhone using Tapatalk Pro
Couldn't give up my pipes either..
3 pipes, 3 Kayfun Lites and 2 Provari's... hmmm, something is wrong with that math!
Couldn't give up my pipes either..
3 pipes, 3 Kayfun Lites and 2 Provari's... hmmm, something is wrong with that math!
Better get 2 more kayfuns!!
Sent from my iPhone using Tapatalk Pro
Well I can't hardly give my Zen mods away..but did trade one for KFL #3 and. Little cash
Well I can't hardly give my Zen mods away..but did trade one for KFL #3 and. Little cash
IA, you're quite the wheeler dealer. You can compete with X.
- Status
Similar threads
