Let's talk hardware

[MwSlim]

How do you like your ehpro kayfun clone? For the price I am pretty happy with mine. Besides the small drip tip hole and the fill screw not being recessed into the atty I have no complaints

Sent from my EVO using Tapatalk

I just set it up last night and took my first vape from it about 5 mins ago.

The quality of it is very nice, it's not as hefty as the kayfun but it is still very nice. Threads are butter which I on par with the Russian and kayfun.

All parts between the Russians and the EHPro are interchangeable except for the decks. They are a little bit different.

My first vape was absolutely horrible but it was my builds fault. I built a vertical micro coil and set it up like a carto. All cotton wicking inside the chamber around the coil. I must have done something wrong. Gonna tear it apart and try again soon.

The KFL+ is waiting to be set up too


Sent from my iPhone using Tapatalk Pro 

 

[PapawBrett]

Ha! I'm running a 30ga microcoil on one of my Vivi Novas and it is kicking .... It is producing a very full throated hit. 30ga., 10-wraps, 2mm ID, 1.9 ohms with three strands of 1mm silica (pulled a double strand to make four and removed one strand so the silicone cap doesn't pinch the wicks).

Nothing quite like a great rebuild for Vapor/ Flavor production, huh, General ?

(and if you're anything like me, that fact I made it makes it even better )

 

[retic1959]

Fogger v2 is bad, I wont recommand it, it's harder to build, and it leaks, its pyrix tank is weak, and the result is not better than kayfun. If this kayfun clone turns out to be good, then buy another one and forget fogger v2.

Thank's TNT but I've already come to that conclusion , Xfoo blasted it too and looking at it , seems as though it is too similar to a protank IMO which I'm phasing out .

 

[Chakris]

Thank's TNT but I've already come to that conclusion , Xfoo blasted it too and looking at it , seems as though it is too similar to a protank IMO which I'm phasing out .

Good you saw that too. I just went back to find XFoo's post on it and was gonna warn ya not to get that one.

Reposting it here:

I set up a Fogger V2 for a friend. It was one of the worst experiences ever. Total pain to secure the coil because the posts are recessed in the cup and are so close to the cup walls. Very prone to hard shorts due to cheap insulators. Finicky juice feeding tech. If you're lucky enough to get the perfect amount of wick in the slots, it vapes good. Too much wick = dry, burnt hits. Too little wick = flooding. If you have to adjust anything, be prepared to do a complete rebuild. Not worth even the cheap cost. My friend, consequently threw it away after three days. My advice is to stay clear of it.

 

[Chakris]

I've already seen aw imr batteries on taobao (chinese ebay) and the price is very intersesting (about 2 bucks for 2000mah 18650), I think fasttech will have it soon.

I ordered mine from a guy on the forum here, they just came in yesterday along with the KF Mini - YAY! The mini is working great, but damn is ever long in the extended mode. Including the drip tip, it's longer than a Spinner 900 mAh Battery!!!

Might be ok if you're going to visit Hogwarts, but around town it's just ridiculously long even though it holds 5 ml of juice, enough to last me all day plus.

 

[Chakris]

Ha! I'm running a 30ga microcoil on one of my Vivi Novas and it is kicking .... It is producing a very full throated hit. 30ga., 10-wraps, 2mm ID, 1.9 ohms with three strands of 1mm silica (pulled a double strand to make four and removed one strand so the silicone cap doesn't pinch the wicks).

I haven't had my Nova tanks out in months. Not since before the ProTanks and KFL came in.


EDIT: The seals on them were starting to go bad and I couldn't see buying any more since I like the ProTanks, Evods and KFL's so much better.

I think I still have some unused atty's for those too. (sigh) Technology is moving faster than the hardware can be used up!!!

 

[tntmux]

Now FT carries taifun gt clone, go take it when it is still available
This one is way much better than fogger v2.

 

[Bronze]

Nothing quite like a great rebuild for Vapor/ Flavor production, huh, General ?

(and if you're anything like me, that fact I made it makes it even better )

It's astonishing how a 10-wrap microcoil wakes up a stock Nova. Still not on par with a Kayfun but few are.

 

[PapawBrett]

Now I am seriously conflicted; I received my brass RM2, in anticipation of my soon to be acquired Woodvil, this past Tuesday. I was hammering, at least 400 miles per day, since Sunday UNTIL today. Knowing I had a short run, I emailed REOS Mods thanking them for their prompt service and that I would be going to the Post Office to return the chrome RM2 that had been mistakenly sent. I come home and find an email from REOS stating "you are most welcome to keep the RM2 no need to mail it back. Rob".
What a great guy, I kinda feel guilty if I do keep it. But he said no need to mail it back....


What the heck, I'll just take an old man map and think this one over zzz zzz zzz zzz ...

 

[LeoRex]

".
What a great guy, I kinda feel guilty if I do keep it. But he said no need to mail it back....

Don't... He knows how to give good customer service. Eating the cost of a RM2 is more than made up for with a happy customer. Like most things, people will pay a premium for stuff that comes with top shelf support. Reosmods has as good a reputation as one can have... that didn't come by accident.

 

[MwSlim]

Starting to get them all set up

Sent from my iPhone using Tapatalk Pro 

 

[jwhorner6]

Starting to get them all set up

Sent from my iPhone using Tapatalk Pro 

Is that third one to the right a king mod?

Sent from my EVO using Tapatalk

 

[MwSlim]

Is that third one to the right a king mod?

Sent from my EVO using Tapatalk

Yeah it's the HCigar King Clone


Sent from my iPad using Tapatalk 2

 

[Chakris]

Now I am seriously conflicted; I received my brass RM2, in anticipation of my soon to be acquired Woodvil, this past Tuesday. I was hammering, at least 400 miles per day, since Sunday UNTIL today. Knowing I had a short run, I emailed REOS Mods thanking them for their prompt service and that I would be going to the Post Office to return the chrome RM2 that had been mistakenly sent. I come home and find an email from REOS stating "you are most welcome to keep the RM2 no need to mail it back. Rob".
What a great guy, I kinda feel guilty if I do keep it. But he said no need to mail it back....


What the heck, I'll just take an old man map and think this one over zzz zzz zzz zzz ...

Whoa, that is cool!

And what did your nap tell you?

 

[jwhorner6]

Yeah it's the HCigar King Clone


Sent from my iPad using Tapatalk 2

I just received my hcigar king clone today. Seems like a beast of a mod but I need to return it due to the 510 connection is too large. My attys just slide down in it instead of screw in.

Sent from my EVO using Tapatalk

 

[MwSlim]

I just received my hcigar king clone today. Seems like a beast of a mod but I need to return it due to the 510 connection is too large. My attys just slide down in it instead of screw in.

Sent from my EVO using Tapatalk

Oh man that sucks! I bought 2 of them, I'm gonna have to check the connection on my other one. My only gripe with this mod is that the lock ring isn't reverse threaded


Sent from my iPhone using Tapatalk Pro 

 

[Bronze]

Yeah it's the HCigar King Clone


Sent from my iPad using Tapatalk 2

What's the one next to the Provari...and the one next to that? They look to be the same mod by my poor eyesight.

 

[Chakris]

The KayFun Mini is a PITA to fill! Now I wish I had gotten one of those filler bottles to go with it. My syringe is too small to force the juice in - it all squirts out the hole instead of going in the tank.

 

[PapawBrett]

Whoa, that is cool!

And what did your nap tell you?

My nap told me with three mods and six RBA's I need to buy more mods (Woodies)

 

[MwSlim]

What's the one next to the Provari...and the one next to that? They look to be the same mod by my poor eyesight.

The brass one is a chi you clone and the ss one is the King Mod Clone, both made by HCigar.


Sent from my iPhone using Tapatalk Pro 