Let's talk hardware

Status
Not open for further replies.

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,045
Yes, I suppose she would. At least my futile time with the Vivi produced something useful. I know many folks love those, they were the most frustrating clearo experience I have ever had...

Until the kayfun, every single juice feeder I have owned (and there have been many) has leaked and oozed to one degree or another. Even brand new out of the box.
 

76bridget

Vaping Master
ECF Veteran
Verified Member
Mar 17, 2013
3,815
20,633
Pop, a #4 finishing nail = 1.86mm. A 10 wrap microcoil of 30g should get you about 1.7ohms

Might be a whole lot easier to pick up that 5/64th drill bit at wally world. I think they are only a couple bucks for a pack of 2.

Edit: I bet Mamaw would get it for ya if you asked her nicely..
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,045
Might be a whole lot easier to pick up that 5/64th drill bit at wally world. I think they are only a couple bucks for a pack of 2.

Edit: I bet Mamaw would get it for ya if you asked her nicely..

Exactly Bridge! They're cheap. I use a jeweler's screwdriver that measures 1.98mm in diameter. Some use a round toothpick. My round toothpicks measure 2.02mm. Your toothpicks might be different. I don't think there is an ANSI standard for toothpicks. :)
 

Dusty_D

Original Guru
Senior Moderator
Supporting Member
ECF Veteran
Verified Member
Jul 22, 2010
16,228
47,678
53
Toronto, Canada
dustysfoodieadventures.blogspot.ca
I am using a nail that is somewhat larger. Maybe 3/32 or so (I think that is about 2.3 mils, my Spanish-speaking Canadian friend from India)

I'm a 3/32 user myself, and yes, it's around 2.3mm. :D
 

Lwr32

Full Member
Sep 4, 2013
58
30
Goodyear, AZ USA
Since we're all talking hardware, I want to show off mine. It's a Kamry 101 with an Afinity Pyrex tank. Attached is a Proclip. I'm using an 18350 900 mAh 3.7v battery that came with it.

image.jpg
 
Last edited:
Do you like the drip carto that comes with the Kamry? I don't. Is there something else I can use so I can use the sleeve that fits over the drip carto?

I bought mine from a member here so it didn't have the carto. But I've heard long barrel drip attys will work. What I did is bought an XL 510 extender from Empiremods and put a regular short barrel 510 atty with it. The beauty sleeve works fine now.

I take the ring off the extender (like in the pic) and it works fine:

http://www.empiremods.com/product_p/510-510sxl.htm

http://www.digitalciggz.com/product-p/joyetech-510-atomizer-25-pack.htm

I've never tried a long barrel atty...so I'm not for sure those would work. And I'm not sure if you drip but just wanted to tell you how I made the beauty shield work.
 
Last edited by a moderator:

NeoLogic

Senior Member
ECF Veteran
May 22, 2013
206
330
Queens, NY
I want another Empire Drip Shield but they are out of stock. Those are perfect for dripping on the K100/101 and are shorter so you don't need an extender at all with a standard atty. As I understand it, the Kamrys are clones of the original Empire K100.

RJ, if you have a link to the shield you want, I can check the store on Saturday to see if they have it in the showroom. If they do, I'll see if we can arrange something.
 

Lwr32

Full Member
Sep 4, 2013
58
30
Goodyear, AZ USA
I have never dripped. The owner at my local vape shop set up the drip carto that came with my k101 and I tried it in the shop. Hardly any vapor production at all. I was using my
Protank II on it but he told me I'd go through atomizers quicker than with the ego-c twist. So I got the carto tank. I like the carto now. Didn't like it on the twist.
 
Status
Not open for further replies.

Users who are viewing this thread